Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC286 / 286E v03.0410 AMPLIFIERS - LOW NOISE - SMT 7 GaAs MMIC LOW NOISE AMPLIFIER, 2.3 - 2.5 GHz Typical Applications Features The HMC286 / HMC286E is ideal for: 2.4 GHz LNA • BlueTooth Noise Figure: 1.7 dB • Home RF Gain: 19 dB • 802.11 WLAN Radios Single Supply: +3V • PCMCIA Platforms No External Components Ultra Small SOT26 Package Functional Diagram General Description The HMC286 & HMC286E are low cost Low Noise Amplifiers (LNA) for 2.3 to 2.5 GHz spread spectrum applications. The LNA provides 19 dB of gain and a 1.7 dB noise figure from a single positive +3V power supply that consumes only 8.5mA. The typical output 1 dB compression point is +6 dBm at 2.4 GHz. The compact LNA design utilizes on-chip matching for repeatable gain and noise figure performance. In addition, eliminating the external matching circuitry also reduces the overall size of the LNA function. The HMC286 & HMC286E were designed to meet the size constraints of PCMCIA platforms and uses the SOT26 package that occupies 0.118” x 0.118”, which makes them a small fully integrated solution that can be easily implemented with other 2.4 GHz ASICs. Electrical Specifi cations, TA = +25° C, Vdd= +3V Parameter Min. Frequency Range Gain 16 0.015 Gain Flatness ±1.25 Noise Figure 1.7 Input Return Loss 12 Output 1 dB Compression (P1dB) 2 Output Third Order Intercept (IP3) 9 Supply Current (Idd) Max. Units GHz 19 Gain Variation Over Temperature Output Return Loss 7 - 10 Typ. 2.3 - 2.5 dB 0.03 dB/°C 2.5 dB dB dB 4.5 dB 6 dBm 12 8.5 dBm 12.5 mA For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC286 / 286E v03.0410 GaAs MMIC LOW NOISE AMPLIFIER, 2.3 - 2.5 GHz 4 20 3.5 NOISE FIGURE (dB) RESPONSE (dB) 15 S21 S11 S22 5 0 -5 -10 -15 2.5 2 1.5 1 0.5 -20 -25 1.6 3 1.8 2 2.2 2.4 2.6 2.8 0 1.6 3 1.8 2 FREQUENCY (GHz) Gain vs. Temperature 4 23 3.5 NOISE FIGURE (dB) 22 GAIN (dB) 21 20 19 18 +25 C +85 C -40 C 16 2.6 2.8 3 +25 C +85 C -40 C 3 2.5 2 1.5 1 0.5 15 14 2.2 2.4 Noise Figure vs. Temperature 24 17 2.2 FREQUENCY (GHz) AMPLIFIERS - LOW NOISE - SMT 25 10 7 Broadband Noise Figure Broadband Gain & Return Loss 2.3 2.4 2.5 0 2.2 2.6 2.3 FREQUENCY (GHz) 2.4 2.5 2.6 FREQUENCY (GHz) Input Return Loss vs. Temperature Output Return Loss vs. Temperature 0 0 -1 +25 C +85 C -40 C -2 RETURN LOSS (dB) RETURN LOSS (dB) -5 -10 -15 -3 -4 -5 -6 -7 +25 C +85 C -40 C -8 -20 -9 -25 2.2 2.3 2.4 FREQUENCY (GHz) 2.5 2.6 -10 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7 - 11 HMC286 / 286E v03.0410 GaAs MMIC LOW NOISE AMPLIFIER, 2.3 - 2.5 GHz 7 Output P1dB vs. Temperature Power Compression @ 2.4 GHz 25 P1dB (dBm) 5 +25 C +85 C -40 C 0 15 GAIN OUTPUT POWER 10 5 0 -5 -5 2.2 2.3 2.4 2.5 -10 -30 2.6 -25 FREQUENCY (GHz) -20 -15 -10 -5 INPUT POWER (dBm) Output IP3 vs. Temperature Reverse Isolation vs. Temperature -20 REVERSE ISOLATION (dB) 20 15 10 +25 C +85 C -40 C 5 0 2.2 2.3 2.4 FREQUENCY (GHz) 7 - 12 POUT (dBm), GAIN (dB) 20 10 THIRD ORDER INTERCEPT (dBm) AMPLIFIERS - LOW NOISE - SMT 15 2.5 2.6 -25 -30 +25 C +85 C -40 C -35 -40 2.2 2.3 2.4 2.5 2.6 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC286 / 286E v03.0410 GaAs MMIC LOW NOISE AMPLIFIER, 2.3 - 2.5 GHz Drain Bias Voltage (Vdd) +7 Vdc RF Input Power (RFIN)(Vdd = +3 Vdc) 0 dBm Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 6.35 mW/°C above 85 °C) 0.413 W Thermal Resistance (channel to lead) 157 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing AMPLIFIERS - LOW NOISE - SMT 7 Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC286 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC286E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H286 XXXX [2] 286E XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7 - 13 HMC286 / 286E v03.0410 GaAs MMIC LOW NOISE AMPLIFIER, 2.3 - 2.5 GHz AMPLIFIERS - LOW NOISE - SMT 7 7 - 14 Pin Descriptions Pin Number Function Description 1 RFIN This pin is AC coupled and matched to 50 Ohms. 2, 5, 6 GND These pins must be connected to RF/DC ground. 3 VDD Power supply voltage. 4 RFOUT This pin is AC coupled and matched to 50 Ohms. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC286 / 286E v03.0410 GaAs MMIC LOW NOISE AMPLIFIER, 2.3 - 2.5 GHz 7 AMPLIFIERS - LOW NOISE - SMT Evaluation PCB List of Materials for Evaluation PCB 103743 [1] Item Description J1, J2 PCB Mount SMA Connector J3, J4 DC Pin U1 HMC286 / HMC286E Amplifier PCB [2] 103741 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Roger 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown above. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7 - 15