mm9710

CA3096 and CA3083 Transistor Array
SPICE Models
TM
July 1997
tle
9
)
30
nd
08
anr
y
E
-
MM9710
Introduction
Model Performance
This application note describes the SPICE transistor models
for the bipolar devices that comprise the CA3096, and the
CA3083 High Frequency NPN/PNP Transistor Arrays.
Several model performance curves have been included to
show how accurately the models match the actual device
characteristics. The squares shown in the graphs represent
data points taken from the data sheet. These data points
show that the model correlates closely to the data sheet
specifications.
Model Description
While this model was developed for the PSPICE simulator
from MicroSim Corporation, it may be adaptable to other
simulators. The performance curves included in this document were generated using PSPICE.
SPICE simulations should not be considered a substitute for
breadboarding a circuit; rather, they should be used to select
preliminary component values and to verify the validity of a
design approach. This model emulates typical rather than
worst case devices, at an ambient temperature of 25oC.
Parameters Not Modeled
Some effects haven’t been included in this model. The major
exclusions are listed below:
• Temperature Effects
• Breakdown Effects
• fT vs VCE Variations
• Reverse Operation Characteristics
tho
ds
rpon,
ior)
()
CI
1
1-888-INTERSIL or 321-724-7143
| Intersil and Design is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2001, All Rights Reserved
Application Note MM9710
PSPICE Listing
*
*COPYRIGHT © 1997 INTERSIL CORPORATION
*ALL RIGHTS RESERVED
*
*CA3096 NPN PSPICE MODEL
*REV: 3-13-97
**
----- BJT MODEL ----*
.model CA3096 NPN
+
(IS = 10.0E - 15
XTI = 3.000E + 00
EG = 1.110E + 00
VAF = 1.00E + 02
+
VAR = 1.000E + 02
BF = 466.5E + 00
ISE = 74.286E - 15
NE = 1.660E + 00
+
IKF = 14.000E - 03
XTB = 0.000E + 00
BR = .1000E + 00
ISC = 10.005E - 15
+
NC = 2.000E + 00
IKR = 10.00E - 03
RC = 10.000E + 00
CJC = 786.51E - 15
+
MJC = 0.333E - 00
VJC = 0.7500E - 00
FC = 5.000E - 01
CJE = 1.28E - 12
+
MJE = .336E- 00
VJE = 0.750E - 00
TR = 10.000E - 09
TF = 490.01E - 12
+
ITF = .270E - 00
XTF = 5.38E + 00
VTF = 28.39E + 00
PTF = 0.000E + 00
+
RE = 0.0E + 00
RB = 0.00E + 00
NK = .468
*
*COPYRIGHT © 1997 INTERSIL CORPORATION
*ALL RIGHTS RESERVED
*
*CA3096 PNP Spice MODEL
*REV: 3-13-97
**
----- BJT MODEL ----*
.model CA3096 PNP
+
(IS = 10.0E - 15
XTI = 3.000E + 00
EG = 1.110E + 00
VAF = 1.00E + 02
+
VAR = 1.000E + 02
BF = 94.5E + 00
ISE = 976.47E - 15
NE = 1.990E + 00
+
IKF = 1.1100E - 03
XTB = 0.000E + 00
BR = .1000E + 00
ISC = 10.005E - 15
+
NC = 2.000E + 00
IKR = 10.00E - 03
RC = 10.000E + 00
CJC = 3.84E - 12
+
MJC = 0.333E - 00
VJC = 0.7500E - 00
FC = 5.000E - 01
CJE = 1.45E - 12
+
MJE = .336E- 00
VJE = 0.750E - 00
TR = 10.000E - 09
TF = 24.3E - 9
PTF = 0.000E + 00
+
ITF = 1.25E - 00
XTF = 10.05E + 00
VTF = 9.79E + 00
+
RE = 0.0E + 00
RB = 0.00E + 00
NK = .53
*
*COPYRIGHT © 1997 INTERSIL CORPORATION
*ALL RIGHTS RESERVED
*
*CA3083 NPN PSPICE MODEL
*REV: 3-13-97
**
----- BJT MODEL ----*
.model CA3083 NPN
+
(IS = 10.0E - 15
XTI = 3.000E + 00
+
VAR = 1.000E + 02
BF = 112.8E + 00
ISE = 99.086E - 15
NE = 1.410E + 00
+
IKF = 120.900E - 03
XTB = 0.000E + 00
BR = 16.0E + 00
ISC = 116.12E - 15
+
NC = 1.700E + 00
IKR = 29.800E - 03
RC = 10.000E + 00
CJC = 991.71E - 15
+
MJC = 0.333E - 00
VJC = 0.7500E - 00
FC = 5.000E - 01
CJE = 1.02E - 12
+
MJE = .333E- 00
VJE = 0.750E - 00
TR = 10.000E - 09
TF = 275.61E - 12
+
ITF = .3750E - 00
XTF = 91.950E + 00
VTF = 8.90E + 00
PTF = 0.000E + 00
+
RE = 0.0E + 00
RB = 0.00E + 00
2
EG = 1.110E + 00
VAF = 1.00E + 02
Application Note MM9710
CA3096 NPN Model Performance
350
400
300
300
(MHz)
250
200
200
150
100
100
50
100µ
300µ
1m
3m
10m
30m
0
100µ
100m
300µ
1m
COLLECTOR CURRENT (A)
3m
10m
30m
100m
30
100
COLLECTOR CURRENT (A)
FIGURE 1. CA3096 NPN fT vs IC
FIGURE 2. CA3096 NPN hFE vs IC
1.5
800
(pF)
1.0
400
200
0.5
100m
300m
1
3
EMITTER-BASE VOLTAGE (V)
0
100m
10
300m
1
1.0
0.8
0.6
0.4
0.2
300µ
1m
3m
10m
30m
COLLECTOR CURRENT (A)
FIGURE 5. CA3096 NPN VCE(SAT) vs IC
3
10
FIGURE 4. CA3096 NPN CCB vs VCB
1.2
0
100µ
3
COLLECTOR-BASE VOLTAGE (V)
FIGURE 3. CA3096 NPN CEB vs VEB
(V)
(pF)
600
100m
Application Note MM9710
(MHz)
CA3096 PNP Model Performance
8
80
6
60
4
40
2
20
0
-100µ
-300µ
-1m
-3m
-10m
-30m
0
-100µ
-100m
-300µ
-1m
-3m
-10m
-30m
-100m
COLLECTOR CURRENT (A)
COLLECTOR CURRENT (A)
FIGURE 6. CA3096 PNP f T vs IC
FIGURE 7. CA3096 PNP hFE vs IC
1.5
4
(pF)
1.0
2
1
0.5
-100m
-300m
-3
-3
EMITTER-BASE VOLTAGE (V)
0
-100m
-10
-300m
-1
-600
-640
-680
-720
-760
-300µ
-1m
-3m
-10m
-30m
JUNCTION CURRENT (A)
FIGURE 10. CA3096 PNP VBE vs IB
4
-10
FIGURE 9. CA3096 PNP CCB vs VCB
-560
-800
-100µ
-3
COLLECTOR-BASE VOLTAGE (V)
FIGURE 8. CA3096 PNP C EB vs VEB
(mV)
(pF)
3
-100m
-30
-100
Application Note MM9710
CA3083 Model Performance
600
90
500
80
(MHz)
400
70
300
200
60
100
0
100µ
300µ
1m
3m
10m
30m
100m
50
100µA
300µA
1m
FIGURE 11. CA3083 fT vs IC
10m
30m
100m
FIGURE 12. CA3083 hFE vs IC
1.0
1.0
0.9
0.8
0.8
(pF)
0.6
0.7
0.4
0.6
0.2
0.5
0.4
100m
300m
1
3
0
100µ
10
300µ
1
FIGURE 13. CA3083 CEB vs VEB
1.0
0.8
0.6
0.4
0.2
300µ
1m
3m
10m
COLLECTOR CURRENT (A)
FIGURE 15. CA3083 VCE(SAT) vs IC
5
10
FIGURE 14. CA3083 C CB vs VCB
1.2
0
100µ
3
COLLECTOR-BASE VOLTAGE (V)
EMITTER-BASE VOLTAGE (V)
(V)
(pF)
3m
COLLECTOR CURRENT (A)
COLLECTOR CURRENT (A)
30m
100m
30
100
Application Note MM9710
All Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.
Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable.
However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its
use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
7585 Irvine Center Drive
Suite 100
Irvine, CA 92618
TEL: (949) 341-7000
FAX: (949) 341-7123
Intersil Corporation
2401 Palm Bay Rd.
Palm Bay, FL 32905
TEL: (321) 724-7000
FAX: (321) 724-7946
6
EUROPE
Intersil Europe Sarl
Ave. C - F Ramuz 43
CH-1009 Pully
Switzerland
TEL: +41 21 7293637
FAX: +41 21 7293684
ASIA
Intersil Corporation
Unit 1804 18/F Guangdong Water Building
83 Austin Road
TST, Kowloon Hong Kong
TEL: +852 2723 6339
FAX: +852 2730 1433