第 1 頁,共 2 頁 JDYX.E20624 - Fuses, Supplemental JDYX.E20624 Fuses, Supplemental Page Bottom Fuses, Supplemental See General Information for Fuses, Supplemental E20624 BEL FUSE INC 206 VAN VORST ST JERSEY CITY, NJ 07302 USA Miniature, cartridge enclosed, nonrenewable: Type or Cat. No. Size Amps V AC 3AG, 3AG-R, 3AP+, 3AGP-R+ 1/4 x 1-1/4 in. 0.01-10 250 3AG, 3AG-R, 3AP+, 3AGP-R+ 1/4 x 1-1/4 in. 12-15 125 8AG, 8AP+ 1/4 x 1 in. 0.032-2 250 1/4 x 1 in. 2.5-7 125 5 x 20 mm 0.05-3 250 5 x 20 mm 3.1-8 125 5 x 20 mm 1-5 125 5 x 20 mm 0.05-0.80 250 5 x 20 mm 0.05-5 125/250 5 x 20 mm 6-8 125 5TTP+, 5TTP-R+ 5 x 20 mm 0.05-3 250 5TTP+, 5TTP-R+ 5 x 20 mm 3.1-8 125 3AB, 3AB-R, 3ABP+, 3ABP-R+ 1/4 x 1 1/4 in. 0.1-20 125/250 MJR, WP90109L1, 5 x 20 mm 0.35A 250 3CB, 3CBP+ 1/4 x 1 1/4 in. 0.062-8 125 MJS+, MJS-R+, WP90400+, WP90400-R+ 5 x 14 mm 0.1-7 250 5MT, 5MTP+(alt.) 5 x 20 mm 1-3 250 5 x 20 mm 3.1-5 125 GSA, GSAP+ 1/4 x 1 1/4 in. 0.062-8 250 3SB, 3SB-R, 3SBP+, 3SBP-R+ 1/4 x 1 1/4 in. 0.05-8 250 8.1-15 125 0.1-5 250 5MF, 5MF-R, 5MFP+, 5MFP-R+ 5MT, 5MT-R, 5MTP+, 5MTP-R+ 5TT, 5TT-R WP90109L7 RGS+, RGS-R+ 4.5x19.5mm Micro, nonrenewable: Type or Cat. No. Amps V AC MB, MBP, MF, MFA 0.125-7 125 MRQ, MRQP 0.25-6.3 250 SST 0.375-7 125ac/dc SSQ 0.1-12 125ac/86dc SSQ 0.1-7 125ac/dc C1Q, C1J 0.25-5 125ac/63dc +Pigtail leads. Note - Cat. Nos. with suffix -R indicates construction with lead-free solder. Last Updated on 2006-07-28 Questions? Print this page Terms of Use Page Top http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=... 05/24/12 JDYX.E20624 - Fuses, Supplemental 第 2 頁,共 2 頁 ?2012 UL LLC The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2012 UL LLC". http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=... 05/24/12