© Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 ■ Overview ■ Benefits • Coaxial, rigid, and flexible single or twin rods for many applications • Measures accurately on materials with dielectric (dK) as low as 1.4 (including LNG at -196 °C (-320.8 °F) • Guided wave radar measurement for up to 2.5 mm (0.12 inch) accuracy • Measures level and interface on challenging applications including foam • 3 button programming for quick setup • Reliable level measurement on harsh applications with pressure up to 430 bar g (6 250 psi g) and temperatures as high as 427 °C (800 °F). • Functional Safety (SIL-1 and SIL-2). Device suitable for use in accordance with IEC 61508 and IEC 61511. 4 ■ Application SITRANS LG200 is a guided wave radar transmitter for short and medium range level, level/interface, and volume measurement of liquids and solids. It is unaffected by changes in process conditions, high temperatures and pressures, and steam. SITRANS LG200 provides accurate measurement in level, volume, and interface applications. For short and extended applications, LG200 offers coaxial, single or twin rod probes, and single or twin cable probes up to 22.5 m (75 ft). SITRANS LG200 measures accurately in liquid or slurry applications of corrosive vapors, foam, saturated steam, high viscosity, quick fill/empty rates, low levels and varying dielectrics and product densities. Ideal for retrofitting torque tube applications, SITRANS LG200 chamber replacement probe can be mounted in existing chambers or cages for optimal measurement. • Key Applications: hydrocarbon processing, interface/level measurement, low dielectric liquids, high temperature/ pressure applications, powdered solids with high angle of repose. Applications on ammonia are also possible with the HT/HP coaxial probe design which incorporates a glass seal that is not susceptible to the vapors seen in this application. Siemens FI 01 · 2014 4/273 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 ■ Configuration Mounting on a nozzle Single rod mounting 1. Do not mount in nozzles <50 (2) in diameter. 2. Mount in applications where ratio of diameter to length is 1:1 or greater. Any ratio less than 1:1 (i.e. 2" x 6" nozzle = 1:3) may require a blanking distance and/or dielectric adjustment. 3. Do not use pipe reducers. 4. Keep conductive objects away from probe to ensure proper performance. Length Diameter Optimal 1:1 ratio Twin rod mounting 7ML1302-x 1. Active rod must be mounted at least 25 (1) away from any obstructions. 2. Minimum stillwell or nozzle diameter for probe is 76 (3), inactive part needs to be flush with inside tank wall. 1) Installation in non-metallic silos For installation in vessels of a non-metallic construction or possibly open vessels, a suitable launch plate is required to optimize the impedance of the transmitted signal as it travels along the probe. Optimal performance cannot be guaranteed if a suitable transition is not available at the process connection. When using single rod versions (flexible or solid) and a threaded process connection, a metal sheet or flange will greatly improve conditions as this provides a suitable launch plate. A flanged process connection is generally accepted to be provision of this launch plate. Silo roof (plastic or wood) 50 (2) Probe can be stabilized at the bottom with a non-metallic cup or bracket. When mounting into a metallic cup or bracket, use optional TFE bottom spacer (7ML1930-1DJ). Do not use reducers. 3) 4) 50 (2) 5) 5) 6) Coaxial 7ML1301-x/coaxial-interface 7ML1301-6 1. Minimum 25 (1) from tank bottom 2. Minimum 2" process connection for enlarged coaxial probe 3. Distance to obstructions not important due to enclosed design Metal sheet or metal flange 2) 19 (¾) 7) 6) Bypass pipe 1. Minimum pipe diameter 50 (2) 2. Minimum 25 (1) from bottom of the bypass pipe 3. Take note of bottom transition zone for chosen probe, see probe type table 4. For pipe diameters less than 50 (2) consult factory Displacer/torque tube replacement 1. With Coaxial Probe 7ML1301-4 there is no top transition zone allowing measurement to the process connection. 2. Minimum pipe size: coaxial probes 2 inch/DN 50, twin rod 3 inch/DN 80, single rod 2 inch/DN 50 3. 22 (0.875) Coaxial probes should be used where limited build up is expected. 1) 2) 3) See electromagnetic compatibility Min. 1 inch - 150 lb, DN 25 PN 16 Min. 2 inch - 150 lb, DN 25 PN 16 4) 5) 6) Min. 3 inch - 150 lb, DN 80 PN 16 Min. 25 (1) from any metal object Min. 25 (1) from tank bottom SITRANS LG200 installation, dimensions in mm (inch) 4/274 Siemens FI 01 · 2014 7) Customer supplied brackets Recommended: 1 bracket per 3 m length L = Probe Insertion Length 4 mA/0 % M = measuring range: min. 300 (11.81) max. 5 700 (224) L=A+M+B 20 mA/100 % Min. 25 (1) A Body connection B 4 3) © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 ■ Technical specifications Mode of operation Design Measuring principle Guided wave radar measurement Weight of transmitter with solid lid 1.28 kg (2.83 lb) Measuring range 0.15 ... 22.5 m (0.5 ... 75 ft) Weight of transmitter with glass window lid 1.60 kg (3.52 lb) Output mA analog output with HART digital signal Optically isolated 4 ... 20 mA, 620 Ω max. Output range • Analog • Start-up current 3.8 ... 20.5 mA usable 4.0 mA Diagnostic alarm Adjustable 3.6 mA, 22 mA, HOLD Digital communication HART Version 5.x and multidrop compatible Performance Reference Conditions 1.82m (72 inch) Coaxial Probe with water at 20 °C (70 °F) and CFD Threshold Non-linearity • Coaxial/twin rod probes • Single rod probes • Interface models Resolution and repeatability Accuracy • Coaxial/twin rod probes • Single rod probes • Interface models Electromagnetic compatibility • Response time • Warm up time • Temperature Effects < 0.1% of probe length or 2.5 mm (0.1 inch), whichever is greater [(top 60 cm (24 inch) of twin rod probes 30 mm (1.2 inch)] < 0.3 % or 0.3 inch (8 mm), whichever is greater Upper layer: ± 25.4 mm (1 inch) Interface layer: ± 25.4 mm (1 inch) (distinct interface surface required) Materials • Enclosure • Degree of protection • Cable inlet Process connections • Threaded • Flanged • Hygenic Meets CE requirements (EN 61326-1/2006) (Single and Twin Rod probes must be used in metallic vessel or stilling well to maintain CE compliance.) <1s <5s + 0.02 % of actual probe length/°C for probes ≥ 2.5 m (8 ft) Rated operating conditions1) Programming Three button, menu-driven data entry with security passwords Remote SIMATIC PDM via HART Power 11 ... 36 V DC Certificates and approvals General Purpose Intrinsically Safe Intrinsically Safe (International) Explosion Proof/Flame Proof Non-Incendive Non-Sparking Others • Ambient temperature for enclosure -40 ... +80 °C (-40 ... +176 °F) • LCD readable temperature range -20 ... +70 °C (-5 ... +160 °F) • Location Indoor/outdoor • Installation category II • Pollution degree 2 • Humidity 0 ... 99 % (non condensing) Medium conditions1) Dielectric constant dK ≥ 1.4 Process temperature range2) -196 ... +427 °C (-321 ... +800 °F) Vessel pressure3) Full vacuum to 431 bar g (6 250 psi g), probe dependent G ¾" [(BSPP), EN ISO 228-1], 1", 1½", 2" NPT [(Taper), ANSI/ASME B1.20.1] and G 2" [(BSPP), EN ISO 228-1] 3/4 ... 4", ASME, DIN flanges 3/4 ... 4", Triclover Local ≤ 2.5 mm (0.1 inch) < 0.1 % of probe length or 0.1 inch (2.5 mm), whichever is greater [Top 60 cm (24 inch) of twin rod probes 30 mm (1.2 inch)] ± 0.5 % of probe length or 0.5 inch (13 mm), whichever is greater ± 1 inch (25 mm) (distinct Interface required) Aluminum, epoxy-coated Type 4/NEMA 4, IP65 2x M20x1.5 or 2 x ½" NPT CSA/FM, CE, C-TICK FM Class I, Div. 1, Groups A, B, C, D, Class II, Div. 1, Groups E, F, G T4, Class III, Type 4, IP65 CSA Class I, Div. 1, Groups A, B, C, D, Class II, Div. 1, Groups E, F, G T4, Class III, Type 4, IP65 ATEX II 1G EEx ia IIC T4 IECEx Ex ia IIc Ga IECEX DEK 11.00067X FM Class I, Div. 1, Groups B, C, D, Class II, Div. 1, Groups E, F, G T4, Class III, Type 4, IP65 CSA Class I, Div. 1, Groups B, C, D, Class II, Div. 1, Groups E, F, G T4, Class III, Type 4, IP65 ATEX II 1/2 G EEx d [ia] IIC T6 ATEX II 1/2 D IP65 T85 °C FM Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2, Groups F, G T4, Class III, Type 4, IP65 CSA Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2, Groups E, F, G T4, Class III, Type 4, IP65 ATEX II 3G EEx nA (nL) IIC T4 ... T6 ATEX II 3G EEx nA II T4 to T6 • Functional Safety to SIL-1 in accordance with IEC 61508 Safe Failure Fraction (SFF) of 85.5 % (Third party FMEDA Analysis - hardware only) • Functional Safety to SIL-2 in accordance with IEC 61508 Safe Failure Fraction (SFF) of 91 % (Third party FMEDA Analysis - hardware only) • Lloyds Steam Vessel Approval conforming to EN12952-11 & EN12953-9 • GOST R 1) If installation is in areas classified as hazardous, please observe relevant certificates 2) Temperature rating is pressure dependent 3) Pressure rating is temperature dependent Siemens FI 01 · 2014 4/275 4 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Coaxial Probe (7ML1301-1) Coaxial HT/HP Probe (7ML1301-2) Coaxial HP Probe (7ML1301-3) Coaxial Overfill/Flooded Cage Probe (7ML1301-4) Model reference number 7xA-x 7xD-x 7xP-x 7xR-x Recommended applications General purpose: clean, low viscosity liquids < 150 °C (300 °F) Clean, high temperature/ high pressure liquids > 200 °C(400 °F), ammonia, chlorine, LNG1), LPG1) Clean, high pressure liquids < 200 °C (400 °F), ammonia, chlorine, LNG, LPG General applications, overfill, temperatures to 200 °C (400 °F), clean, low viscosity liquids, displacer/torque-tube replacement Not recommended for: Coating and buildup, foam Coating and buildup, foam, steam Coating and buildup, foam, steam Coating and buildup, foam Materials/wetted parts 316 L stainless steel, TFE spacers, O-ring2) 316L stainless steel, Alumina spacers3), (option PEEK4) or TFE5)), Borosilicate 316L stainless steel, TFE spacers, Borosilicate 316L stainless steel, TFE spacers, O-ring2) Process seal O-ring2) Borosilicate (no O-ring) Borosilicate (no O-ring) O-ring2) Standard ø 8 mm (0.3125 inch) rod ø 22 mm (0.875 inch) tube ø 8 mm (0.3125 inch) rod ø 22 mm (0.875 inch) tube ø 8 mm (0.3125 inch) rod ø 22 mm (0.875 inch) tube ø 8 mm (0.3125 inch) rod ø 22 mm (0.875 inch) tube Enlarged N/A ø 15 mm (0.63 inch) rod ø 45 mm (1.75 inch) tube ø 15 mm (0.63 inch) rod ø 45 mm (1.75 inch) tube ø 15 mm (0.63 inch) rod ø 45 mm (1.75 inch) tube Standard ¾" NPT [(Taper), ANSI/ASME B1.20.1], G 1" [(BSPP), EN ISO 228-1] ¾" NPT [(Taper), ANSI/ASME B1.20.1], G 1" [(BSPP), EN ISO 228-1] ¾" NPT [(Taper), ANSI/ASME B1.20.1], G 1" [(BSPP), EN ISO 228-1] ¾" NPT [(Taper), ANSI/ASME B1.20.1], G 1" [(BSPP), EN ISO 228-1] Enlarged N/A 2" NPT [(Taper), ANSI/ASME B1.20.1] 2" NPT [(Taper), ANSI/ASME B1.20.1] 2" NPT [(Taper), ANSI/ASME B1.20.1] Standard 1 ... 4" (DN 25 ... 100) 1 ... 4" (DN 25 ... 100) 1 ... 4" (DN 25 ... 100) 1 ... 4" (DN 25 ... 100) Enlarged N/A 2 ... 4" (DN 50 ... 100) 2 ... 4" (DN 50 ... 100) 2 ... 4" (DN 50 ... 100) Length 60 ... 610 cm (24 ... 240 inch) 60 ... 610 cm (24 ... 240 inch) 60 ... 610 cm (24 ... 240 inch) 60 ... 610 cm (24 ... 240 inch) Top 25 mm (1 inch) at dk = 1.4 150 mm (6 inch) at dk = 80 None 25 mm (1 inch) at dk = 1.4 150 mm (6 inch) at dk = 80 None Bottom 150 mm (6 inch) at dk = 1.4 25 mm (1 inch) at dk = 80 150 mm (6 inch) at dk = 1.4 25 mm (1 inch) at dk = 80 150 mm (6 inch) at dk = 1.4 25 mm (1 inch) at dk = 80 150 mm (6 inch) at dk = 1.4 25 mm (1 inch) at dk = 80 Process temperature maximum 150 °C at 27 bar g (300 °F at 400 psi g) 427 °C at 133 bar g (800 °F at 2 000 psi g)7) 200 °C at 379 bar g (400 °F at 5 500 psi g) 200 °C at 18 bar g (400 °F at 270 psi g) Process temperature minimum -40 °C at 70 bar g (-40 °F at 1 000 psi g) -196 °C at 430 bar g (-321 °F at 6 250 psi g) -196 °C at 430 bar g (-321 °F at 6 250 psi g) -40 °C at 70 bar g (-40 °F at 1 000 psi g) Process pressure maximum 70 bar g at 20 °C (1 000 psi g at 70 °F) 431 bar g at 20 °C (6 250 psi g at 70 °F) 431 bar g at 20 °C (6 250 psi g at 70 °F) 70 bar g at 20 °C (1 000 psi g at 70 °F) Process pressure minimum/vacuum service Yes, not hermetic8) Yes, hermetic (<10-8 cc/sec at 1 atmosphere) Yes, hermetic (<10-8 cc/sec at 1 atmosphere) Yes, not hermetic Dielectric range (dk) 1.4 ... 100 1.4 ... 1001) 1.4 ... 100 1.4 ... 100 Standard 500 500 500 500 Enlarged N/A 1 500 1 500 1 500 Coating/buildup No No No No Foam No No No No Corrosives Yes Yes Yes Yes Sanitary No No No No Overfill No Yes No Yes Rod/tube diameter 4 Process connection thread Flange ASME (EN/DIN) Transition Zone6) Process pressure Maximum viscosity (cP) 1) Dependent on spacer option 2) See O-Ring Selection Guide for guidance 3) For dk ≥ 2, maximum temperature 427 °C (800 °F) 4) For dk ≥ 1.4, maximum temperature 343 °C (650 °F), PEEK spacers standard on enlarged coaxial design 5) For dk 1.4, maximum temperature 288 °C (550 °F) 6) Transition zone is dielectric dependent: dK = dielectric permittivity. Unit will function but accuracy will decrease in Transition Zone 7) 345 °C (650 °F) with PEEK spacers 8) Not hermetic: sealing by means of O-ring. Hermetic: sealing by means of borosilicate glass window 4/276 Siemens FI 01 · 2014 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 7xF-x Single Rigid Rod HT/HP Probe (7ML1303-2) 7xJ-x Single Rigid Rod Probe, PFA rod insulation (7ML1303-1J) 7xF-4 Liquid/liquid-interface, temperatures to 200 °C (400 °F); clean, low-viscosity liquids Coating and buildup, foam Coating and buildup, foam Coating and buildup, foam Excessive coating and buildup, foam Low dielectric media (dK < 10)1) Low dielectric media (dK < 10)1) Low dielectric media (dK < 10)1) 316L stainless steel, TFE spacers, O-ring2) 316L stainless steel, TFE, O-ring2) 316L stainless steel, TFE, O-ring2) O-ring2) O-ring2) Aegis PF128 O-ring only2) 316L stainless steel, PFA, TFE, O-ring2) O-ring2) ø 8 mm (0.3125 inch) rod ø 22 mm (0.875 inch) tube N/A ø 8 mm (0.3125 inch) rod ø 22 mm (0.875 inch) tube ø 15 mm (0.63 inch) rod ø 45 mm (1.75 inch) tube ø 12 mm (0.5 inch) rod ø 12 mm (0.5 inch) rod N/A N/A ø 12 mm (0.5 inch) rod ø 16 mm (0.625 inch) insulation N/A ¾" NPT [(Taper), ANSI/ASME B1.20.1], G 1" [(BSPP), EN ISO 228-1] N/A ¾" NPT [(Taper), ANSI/ASME B1.20.1], G 1" [(BSPP), EN ISO 228-1] 2" NPT [(Taper), ANSI/ASME B1.20.1] 2" NPT [(Taper), ANSI/ASME B1.20.1], G 2" [(BSPP), EN ISO 228-1] N/A 2" NPT [(Taper), ANSI/ASME B1.20.1], G 2" [(BSPP), EN ISO 228-1] N/A 2" NPT [(Taper), ANSI/ASME B1.20.1], G 2" [(BSPP), EN ISO 228-1] N/A 1 ... 4" (DN 25 ... 100) N/A 60 ... 455 cm (24 ... 180 inch) 1 ... 4" (DN 25 ... 100) 2 ... 4" (DN 50 ... 100) 60 ... 610 cm (24 ... 240 inch) 2 ... 4" (DN 50 ... 100) N/A 60 ... 610 cm (24 ... 240 inch) 2 ... 4" (DN 50 ... 100) N/A 60 ... 610 cm (24 ... 240 inch) 2 ... 4" (DN 50 ... 100) N/A 60 ... 610 cm (24 ... 240 inch) 25 mm (1 inch) at dk ≥ 10 none Bottom 25 mm (1 inch) at dk ≥ 10 Application, installation, and dielectric dependent 25 mm (1 inch) at dk >10 Application, installation, and dielectric dependent 25 mm (1 inch) at dk >10 Process temperature maximum 343 °C at 165 bar g (650 °F at 2 400 psi g) (saturated steam) 150 mm (6 inch) at dk = 1.4 25 mm (1 inch) at dk = 80 200 °C at 18 bar g (400 °F at 270 psi g) Application, installation, and dielectric dependent 25 mm (1 inch) at dk >10 150 °C at 27 bar g (300 °F at 400 psi g) 316 °C at 165 bar g (605 °F at 2 400 psi g) 150 °C at 27 bar g (300 °F at 400 psi g) Process temperature minimum Process pressure maximum Process pressure min. vacuum service Dielectric range -40 °C at 207 bar g (-40 °F at 3 000 psi g) 165 bar g at 343 °C (2 400 psi g at 650 °F) Yes, not hermetic -40 °C at 70 bar g (-40 °F at 1 000 psi g) 70 bar g at 20 °C (1 000 psi g at 70 °F) Yes, not hermetic -40 °C at 70 bar g (-40 °F at 1 000 psi g) 70 bar g at 20 °C (1 000 psi g at 70 °F) Not suitable -40 °C at 70 bar g (-40 °F at 1 000 psi g) 207 bar g at 20 °C (3 000 psi g at 70 °F) Not suitable -40 °C at 50 bar g (-40 °F at 750 psi g) 70 bar g at 20 °C (1 000 psi g at 70 °F) Not suitable 10 ... 100 Upper liquid layer 1.4 ... 5 Interface liquid layer 15 ... 100 1.9 ... 1001) 1.9 ... 1001) 1.9 ... 1001) Maximum viscosity Standard Enlarged Coating/buildup 500 cP N/A No 500 cP 1 500 cP No 10 000 cP (consult factory if severe agitation/turbulence) Foam Corrosives Sanitary Overfill No Yes No Yes No Yes No Yes Model reference number Recommended applications Not recommended for Materials/wetted parts Process seal Rod/Tube diameter: Standard Enlarged Process connection thread Standard Enlarged Flange ASME (EN/DIN) Standard Enlarged Length Transition Zone3) Top 1) 2) 3) Coaxial Steam Probe (7ML1301-5) Coaxial Interface Probe (7ML1301-6) Single Rigid Rod Probe (7ML1303-1) 7xS-x 7xT-x Hot water (steam) >200 °C (400 °F) (external chamber is required for use in boilers) General purpose, coating and buildup, foam 316L stainless steel, PEEK spacers, Aegis PF128 O-ring2) Aegis PF128 O-ring2), PEEK only Yes, maximum error 10 % of coated length;% error related to dielectric of media, thickness of coating and coated probe length above media Yes Yes Yes Yes Yes Yes No No No No No No With dK of 1.9 ... 10, the device must be mounted between 50 and 150 mm (2 ... 6 inch) of metal tank wall or in chamber/bridle See O-ring Selection Guide for guidance Transition zone is dielectric dependent: dK = dielectric permittivity. Unit will function but accuracy will decrease in Transition Zone Siemens FI 01 · 2014 4/277 4 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 4 Single Rigid Rod Probe, Sanitary (7ML1303-1D) Single Rigid Rod Probe, PFA faced flange(7ML1303-1E) Single Flexible Rod Probe (7ML1304-1) Single Flexible Rod Probe for Bulk Solids (7ML1304-2) Model reference number 7xF-E 7xF-F 7x1-x 7x2-x Recommended applications: Applications demanding sanitary specifications Extreme corrosives, coating/buildup, foam Coating and buildup, foam; lengths > 6 m (20 ft) headroom Granular bulk solids applications (powders, grain, dust) 3 000 lb pull down force Not recommended for Low dielectric media (dK < 10)1) Low dielectric media (dK < 10)1) Low dielectric media (dK < 4) Solids with dK < 4 Materials/wetted parts 316L stainless steel, TFE, 15 µ-inch (<0.4 µm) Ra All PFA - wetted surfaces 316L stainless steel, TFE, O-ring2) 316L stainless steel, TFE, O-ring2) Optional AL6XN stainless steel N/A N/A N/A Process seal 316L stainless steel, TFE, O-ring2) PFA, no O-ring O-ring2) Sealant Rod/tube diameter ø 12 mm (0.5 inch) rod ø 12 mm (0.5 inch) rod ø 16 mm (0.625 inch) insulation ø 5 mm (0.188 inch) cable ø 6 mm (0.25 inch) cable Process connection thread N/A N/A 2" NPT [(Taper), ANSI/ASME B1.20.1], G 2" [(BSPP), EN ISO 228-1] 2" NPT [(Taper), ANSI/ASME B1.20.1], G 2" [(BSPP), EN ISO 228-1] Flange ASME (DIN) 19 ... 100 mm (¾ ... 4 inch) Triclover-style 16 amp fitting 2 ... 4 inch (DN 50 ... 100) 2 ... 4 inch (DN 50 ... 100) 2 ... 4 inch (DN 50 ... 100) Length 60 ... 610 cm (24 ... 240 inch) 60 ... 610 cm (24 ... 240 inch) 1 ... 22.5 m (3 ... 75 ft) 1 ... 22.5 m (3 ... 75 ft) Top Application, installation, and dielectric dependent Application, installation, and dielectric dependent Application, installation, and dielectric dependent Application, installation, and dielectric dependent Bottom 25 mm (1 inch) at dk >10 25 mm (1 inch) at dk >10 305 mm (12 inch) 305 mm (12 inch) Process temperature maximum 150 °C at 5.1 bar g (300 °F at 75 psi g) 150 °C at 27 bar g (300 °F at 400 psi g) 150 °C at 27 bar g (300 °F at 400 psi g) 66 °C at 3.4 bar g (150 °F at 50 psi g) Process temperature minimum 0 °C at 5.1 bar g (32 °F at 75 psi g) -40 °C at 13.7 bar g (-40 °F at 200 psi g) -40 °C at 70 bar g (-40 °F at 1 000 psi g) -40 °C at 3.4 bar g (-40 °F at 50 psi g) Process pressure maximum 5.1 bar g at 150 °C (75 psi g at 300 °F) 70 bar g at 20 °C (1 000 psi g at 70°F) 70 bar g at 20 °C (1 000 psi g at 70 °F) 3.4 bar g at 66 °C (50 psi g at 150 °F) Process pressure minimum/ vacuum service Not suitable for vacuum applications Dielectric range 1.9 ... 1001) 4 ... 1001) 4 ... 100 Maximum viscosity (cP) 10 000 (consult factory if severe agitation/turbulence) Coating/buildup Yes, maximum error 10 % of coated length; % error related to dielectric of media, thickness of coating and coated probe length above media Foam Yes Yes Yes Yes Corrosives No Yes No No Sanitary Yes No No No Overfill No No No No Transition Zone3) Process pressure: 1.9 ... 1001) N/A 1) With dK of 1.9 ... 10, the device must be mounted between 50 and 150 mm (2 ... 6 inch) of metal tank wall or in chamber/bridle 2) See O-ring Selection Guide for guidance 3) Transition zone is dielectric dependent: dK = dielectric permittivity. Unit will function but accuracy will decrease in Transition Zone 4/278 Siemens FI 01 · 2014 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Twin Rod Probe (7ML1302-1) Flexible Twin Rod Probe (7ML1302-3) Flexible Twin Rod Bulk Solids Probe (7ML1302-2) Model reference number 7xB-x 7x7-x 7x5-x Recommended applications: General purpose, foam, minor film coating Low dielectric media (1.9 ... 10) with lengths > 6 m (20 ft) Granular light bulk solids applications (powders, grains, dust), 3 000 lb pull-down force Not recommended for: Media bridging between rods or building up on spacers Dielectric > 10: media bridging on flexible elements, dielectrics < 5 with lengths > 10 m (30 ft) Media bridging flexible elements Materials/wetted parts 316L stainless steel, TFE spacers, O-ring1) 316L stainless steel, FEP webbing, O-ring1) 316L stainless steel, FEP webbing, O-ring1) Process seal O-ring1) O-ring1) Sealant Rod/tube diameter Two, ø 12 mm (0.5 inch) rod; 22 mm (0.875 inch) CL ... CL Two, ø 6 mm (0.25 inch) cables; 22 mm (0.875 inch) CL ... CL Two, ø 6 mm (0.25 inch) cables; 22 mm (0.875 inch) CL ... CL Process connection thread 2" NPT [(Taper), ANSI/ASME B1.20.1], G " [(BSPP), EN ISO 228-1] 2" NPT [(Taper), ANSI/ASME B1.20.1], G 2" [(BSPP), EN ISO 228-1] 2" NPT [(Taper), ANSI/ASME B1.20.1], G 2" [(BSPP), EN ISO 228-1] Flange ASME (EN/DIN) 2 ... 4" (DN 50 ... 100) 2 ... 4" (DN 50 ... 100) 2 ... 4" (DN 50 ... 100) Length 60 ... 610 cm (24 ... 240 inch) 1 ... 22.5 m (3 ... 75 ft) 1 ... 22.5 m (3 ... 75 ft) Top 150 mm (6 inch) at dK > 1.9 Blocking distance: none 150 mm (6 inch) at dK > 1.9 Blocking distance: 12 ... 50 cm (4.8 ... 20 inch) 150 mm (6 inch) at dK > 1.9 Blocking distance: 12 ... 50 cm (4.8 ... 20 inch) Bottom 150 mm (6 inch) at dK = 1.9 25 mm (1 inch) at dK = 80 305 mm (12 inch) 305 mm (12 inch) Transition Zone2): Process temperature max.3) 200 °C at 19 bar g (400 °F at 275 psi g) 66 °C at 3.4 bar g (150 °F at 50 psi g) Process temperature min. -40 °C at 70 bar g (-40 °F at 1 000 psi g) -40 °C at 3.4 bar g (-40 °F at 50 psi g) 70 bar g at 20 °C (1 000 psi g at 70 °F) 3.4 bar g at 66 °C (50 psi g at 150 °F) Process pressure max. Process pressure min./ vacuum service Yes, not hermetic Dielectric range 1.9 ...100 1.9 ... 100 1.9 ... 100 Maximum viscosity (cP) 1 500 1 500 Not suitable Coating/buildup Not suitable Yes, maximum error 3 % of coated length with conductive media Bridging not recommended.4) Foam Yes Yes Yes Corrosives Yes No Yes Sanitary No No No Overfill No No No 1) See O-ring Selection Guide for guidance 2) Transition zone is dielectric dependent: dK = dielectric permittivity. Unit will function but accuracy will decrease in Transition Zone 3) Refer to Ambient Temperature vs Process Temperature graphs or instruction manual 4) Bridging is defined as continuous accumulation of material between the probe elements O-ring and Seal Selection Guide Material Recommended for Use in: Not Recommended for Use In: Viton GFLT General purpose, steam, ethylene Ketones (MEK, acetone), skydrol fluids, amines, anhydrous ammonia, low molecular weight esters and ethers, hot hydrofluoric or chlorosulfuric acids, sour HCs EPDM Acetone, MEK, skydrol fluids Petroleum oils, di-ester base lubricants, propane, steam, anhydrous ammonia Kalrez (4079) Inorganic and organic acids (including HF and nitric) aldehydes, ethylene, glycols, organic oils, silicone oils, vinegar, sour HCs Black liquor, hot water/steam, hot aliphatic amines, ethylene oxide, propylene oxide, molten sodium, molten potassium, anhydrous ammonia Aegis PF128 Inorganic and organic acids (including HF and nitric) aldehydes, ethylene, glycols, organic oils, silicone oils, vinegar, sour HCs, steam, amines, ethylene oxide, propylene oxide Black liquor, Freon 43, Freon 75, Galden, KEL-F liquid, molten sodium, molten potassium, anhydrous ammonia Borosilicate (HT/HP probes only) General high temperature/high pressure applications, hydrocarbons, full vacuum (hermetic), anhydrous ammonia Steam, hot alkaline solutions, HF acid, media with pH>12, condensate Siemens FI 01 · 2014 4/279 4 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data SITRANS LG200 Transmitter A guided wave radar transmitter for short and medium range level, level/interface, and volume measurement of liquids and solids, including high temperature and pressure applications, and steam. 7ML1300- Further designs 7 7 7 1 7 - 77 A 0 Please add "-Z" to Article No. and specify Order code(s). Note: In addition to the transmitter, please select a probe configuration to complete the SITRANS LG200 (ordered separately). For orders of 10 or more, please consult factory. Power 24 V DC, 2-wire Signal Output 4 ... 20 mA HART 4 Options SIL-1 Approved (FMEDA analysis) SFF = 85.5 % SIL-2 Approved (FMEDA analysis) SFF = 91 % Enclosure/lid Aluminum Aluminum with glass window Cable inlet 2 x ½" NPT, IP65 2 x M20x1.5, IP65 Approvals (Please select for your region) North America General Purpose and Intrinsically Safe (CSA/FM Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G T4, Class III); Non-incendive (CSA Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2, Groups E, F, G; FM Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2, Groups F, G) Explosion Proof (CSA/FM Class I, Div. 1, Groups B, C, and D; Class II, Div. 1, Groups E, F, G, T4; Class III); Non-incendive (CSA Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2, Groups E, F, G; FM Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2, Groups F, G) Europe General Purpose and Intrinsically Safe (ATEX II 1G EEx ia IIC T4); IECEx Ex ia IIC T4 Ga Explosion Proof (ATEX II 1/2 GD EEx d [ia] IIC T6) Non-sparking [ATEX II 3G EEx nA II/EEx nA (nL) IIC T4 to T6] 4/280 Siemens FI 01 · 2014 1 A Order code Manufacturer's test certificate: M to DIN 55350, Part 18 and to ISO 9000 [Available only when ordered in conjunction with a probe (7ML130x-x). Testing requires transmitter with probe.] C11 Operating Instructions Article No. English 7ML1998-5KA02 French 7ML1998-5KA11 German 7ML1998-5KA32 Multi-language Quick Start manual This device is shipped with the Siemens Milltronics manual DVD containing the ATEX Quick Start and Operating Instructions library. 7ML1998-5XG81 Accessories A B SITRANS RD100 Remote display - see Chapter 7 SITRANS RD200 Remote display - see Chapter 7 SITRANS RD500 web, datalogging, alarming, ethernet, and modem support for instrumentation see Chapter 7 1 2 For applicable back up point level switch see point level section on page 4/9 0 1 A B C D E 7ML57501AA00-0 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 . Selection and Ordering data Article No. Selection and Ordering data Article No. SITRANS LG200 Coaxial Probes SITRANS LG200 coaxial probes are used in most standard applications. Coaxial probes yield robust signal strength even in extremely low dielectric applications (dK 1.4 ... 100). 7ML1301- SITRANS LG200 Coaxial Probes SITRANS LG200 coaxial probes are used in most standard applications. Coaxial probes yield robust signal strength even in extremely low dielectric applications (dK 1.4 ... 100). 7ML1301- 77 7 7 7 - 777 0 Add Order code Y01 and plain text: "Insertion length ... cm" Model options 3, 6 with Material of Construction option E: 60 ... 100 cm (23.6 ... 39.4 inch) Model options 3, 6 with Material of Construction option E: 101 ... 200 cm (39.8 ... 78.7 inch) Model options 3, 6 with Material of Construction option E: 201 ... 300 cm (79.1 ... 118.1 inch) Note: In addition to the probe, please select a transmitter configuration to complete the SITRANS LG200 (ordered separately). For orders of 10 or more, please consult factory. Model Coaxial1) 2)12) Coaxial, High Temperature/High Pressure2)3) Coaxial, High Pressure2)3) 1 2 3 Coaxial, Overfill/Flooded Cage1)2) Coaxial Steam4)5) Coaxial, Interface1)2) 4 5 6 Material of Construction 316/316L (1.4401/1.4404) stainless steel probe and process connection 316/316L (1.4401/1.4404) stainless steel probe ASME B31.1 specifications6) Enlarged Coaxial, 316/316L (1.4401/1.4404) stainless steel probe and process connection with PEEK Spacers7) 316/316L (1.4401/1.4404) stainless steel probe and process connection with PEEK HT spacers dk ≥ 1.48) 316/316L (1.4401/1.4404) stainless steel probe and process connection with Teflon spacers dk ≥ 28)9) Probe Insertion Length Add Order code Y01 and plain text: "Insertion length ... mm" Model option 1, 4 and Material of Construction option A, E: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 1, 4 and Material of Construction option A, E: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 1, 4 and Material of Construction option A, E: 201 ... 300 cm (79.1 ... 118.1 inch) Model option 1, 4 and Material of Construction option A, E: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 1, 4 and Material of Construction option A, E: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 1, 4 and Material of Construction option A,E: 501 ... 610 cm (197.2 ... 240.2 inch) Add Order code Y01 and plain text: "Insertion length ... cm" Model options 3, 6 with Material of Construction option A: 60 ... 100 cm (23.6 ... 39.4 inch) Model options 3, 6 with Material of Construction option A: 101 ... 200 cm (39.8 ... 78.7 inch) Model options 3, 6 with Material of Construction option A: 201 ... 300 cm (79.1 ... 118.1 inch) Model options 3, 6 with Material of Construction option A: 301 ... 400 cm (118.5 ... 157.5 inch) Model options 3, 6 with Material of Construction option A: 401 ... 500 cm (157.9 ... 196.9 inch) Model options 3, 6 with Material of Construction option A: 501 ... 610 cm (197.2 ... 240.2 inch) D E H J A1 A2 A3 A4 A5 A6 B1 B2 B3 B4 B5 B6 C1 C2 C3 Model options 3, 6 with Material of Construction option E: 301 ... 400 cm (118.5 ... 157.5 inch) C4 Model options 3, 6 with Material of Construction option E: 401 ... 500 cm (157.9 ... 196.9 inch) Model options 3, 6 with Material of Construction option E: 501 ... 610 cm (197.2 ... 240.2 inch) C5 Add Order code Y01 and plain text: "Insertion length ... cm" Model option 2 with Material of Construction options A, E, H, J: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 2 with Material of Construction options A, E, H, J: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 2 with Material of Construction options A, E, H, J: 201 ... 300 cm (79.1 ... 118.1 inch) A 77 7 7 7 - 77 7 0 4 C6 E1 E2 E3 Model option 2 with Material of Construction options A, E, H, J: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 2 with Material of Construction options A, E, H, J: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 2 with Material of Construction options A, E, H, J: 501 ... 610 cm (197.2 ... 240.2 inch) Add Order code Y01 and plain text: "Insertion length ... cm" E4 Model option 5 with Material of Construction options A, D: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 5 with Material of Construction options A, D: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 5 with Material of Construction options A, D: 201 ... 300 cm (79.1 ... 118.1 inch) F1 Model option 5 with Material of Construction options A, D: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 5 with Material of Construction options A, D: 401 ... 455 cm (157.9 ... 180 inch) F4 E5 E6 F2 F3 F5 O-rings Viton EPDM (Ethylene Propylene Rubber) Kalrez 4079 1 1 1 1 2 3 HSN (Nitrile) Buna-N Neoprene 1 1 1 4 5 6 Chemraz Polyurethane Aegis PF128 (can be used on steam applications) 1 1 2 7 8 1 Kalrez 2035 None (Borosilicate glass seal, not for steam applications)10) 2 2 2 3 Siemens FI 01 · 2014 4/281 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data Article No. SITRANS LG200 Coaxial Probes SITRANS LG200 coaxial probes are used in most standard applications. Coaxial probes yield robust signal strength even in extremely low dielectric applications (dK 1.4 ... 100). 7ML1301- SITRANS LG200 Coaxial Probes SITRANS LG200 coaxial probes are used in most standard applications. Coaxial probes yield robust signal strength even in extremely low dielectric applications (dK 1.4 ... 100). 7ML1301- Process Connection (Size/Type) Threaded ¾" NPT [(Taper), ANSI/ASME B1.20.1] G 1" [(BSPP), EN ISO 228-1] G 2" [(BSPP), EN ISO 228-1]11) 4 77 7 7 7 - 777 0 AA AB AC 2" NPT [(Taper), ANSI/ASME B1.20.1]11) ASME flanges 1" 150 lb ASME raised face flange 1" 300 lb ASME raised face flange 1" 600 lb ASME raised face flange AD 1" 900/1 500 lb ASME raised face flange10) 1" 2 500 lb ASME raised face flange10) 1" 900/1 500 lb ASME ring joint flange10) BD BE BF 1" 2 500 lb ASME ring joint flange10) BG 1½" 150 lb ASME raised face flange 1½" 300 lb ASME raised face flange CA CB 1½" 600 lb ASME raised face flange 1½" 900/1 500 lb ASME raised face flange10) 1½" 2 500 lb ASME raised face flange10) CC CD CE 1½" 600 lb ASME ring joint flange 1½" 900/1 500 lb ASME ring joint flange10) 1½" 2 500 lb ASME ring joint flange10) CF CG CH 2" 150 lb ASME raised face flange 2" 300 lb ASME raised face flange 2" 600 lb ASME raised face flange DA DB DC 2" 900/1 500 lb ASME raised face flange10) 2" 2 500 lb ASME raised face flange10) 2" 600 lb ASME ring joint flange DD DE DF 2" 900/1 500 lb ASME ring joint flange10) 2" 2 500 lb ASME ring joint flange10) DG DH 3" 150 lb ASME raised face flange EA 3" 300 lb ASME raised face flange 3" 600 lb ASME raised face flange 3" 900 lb ASME raised face flange10) 3" 1 500 lb ASME raised face flange10) EB EC ED EE 3" 2 500 lb ASME raised face flange10) 3" 600 lb ASME ring joint flange 3" 900 lb ASME ring joint flange10) EF EG EH 3" 1 500 lb ASME ring joint flange10) 3" 2 500 lb ASME ring joint flange10) 4" 150 lb ASME raised face flange EJ EK FA 4" 300 lb ASME raised face flange 4" 600 lb ASME raised face flange 4" 900 lb ASME raised face flange10) FB FC FD 4" 1 500 lb ASME raised face flange10) 4" 2 500 lb ASME raised face flange10) 4" 600 lb ASME ring type joint flange FE FF FG FH 4" 900 lb ASME ring type joint flange10) 4" 1 500 lb ASME ring type joint flange10) 4" 2 500 lb ASME ring type joint flange10) 4/282 Siemens FI 01 · 2014 BA BB BC FJ FK EN flanges DN 25 PN 16 EN 1092-1 Type A flat faced flange DN 25 PN 25/40 EN 1092-1 Type A flat faced flange DN 25 PN 64/100 EN 1092-1 Type B2 raised faced flange 77 7 7 7 - 77 7 0 GA GB GC DN 25 PN 160 EN 1092-1 Type B2 raised faced flange10) DN 25 PN 250 EN 1092-1 Type B2 raised faced flange10) DN 25 PN 320 EN 1092-1 Type B2 raised faced flange10) GD DN 25 PN 400 EN 1092-1 Type B2 raised faced flange10) DN 40 PN 16 EN 1092-1 Type A flat faced flange DN 40 PN 25/40 EN 1092-1 Type A flat faced flange GG DN 40 PN 64/100 EN 1092-1 Type B2 raised faced flange DN 40 PN 160 EN 1092-1 Type B2 raised faced flange10) DN 40 PN 250 EN 1092-1 Type B2 raised faced flange10) HC DN 40 PN 320 EN 1092-1 Type B2 raised faced flange10) DN 40 PN 400 EN 1092-1 Type B2 raised faced flange10) DN 50 PN 16 EN 1092-1 Type A flat faced flange HF DN 50 PN 25/40 EN 1092-1 Type A flat faced flange JB DN 50 PN 64 EN 1092-1 Type B2 raised faced flange DN 50 PN 100 EN 1092-1 Type B2 raised faced flange JC DN 50 PN 160 EN 1092-1 Type B2 raised faced flange10) DN 50 PN 250 EN 1092-1 Type B2 raised faced flange10) DN 50 PN 320 EN 1092-1 Type B2 raised faced flange10) JE DN 50 PN 400 EN 1092-1 Type B2 raised faced flange10) DN 80 PN 16 EN 1092-1 Type A flat faced flange DN 80 PN 25/40 EN 1092-1 Type A flat faced flange JH GE GF HA HB HD HE HG JA JD JF JG KA KB DN 80 PN 64 EN 1092-1 Type B2 raised faced flange DN 80 PN 100 EN 1092-1 Type B2 raised faced flange DN 80 PN 160 EN 1092-1 Type B2 raised faced flange10) KC DN 80 PN 250 EN 1092-1 Type B2 raised faced flange10) DN 80 PN 320 EN 1092-1 Type B2 raised faced flange10) DN 80 PN 400 EN 1092-1 Type B2 raised faced flange10) KF KD KE KG KH © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data SITRANS LG200 Coaxial Probes SITRANS LG200 coaxial probes are used in most standard applications. Coaxial probes yield robust signal strength even in extremely low dielectric applications (dK 1.4 ... 100). 7ML1301- Further designs 77 7 7 7 - 777 0 Please add "-Z" to Article No. and specify Order code(s). DN 100 PN 16 EN 1092-1 Type A flat faced flange DN 100 PN 25/40 EN 1092-1 Type A flat faced flange DN 100 PN 64 EN 1092-1 Type B2 raised faced flange LA DN 100 PN 100 EN 1092-1 Type B2 raised faced flange DN 100 PN 160 EN 1092-1 Type B2 raised faced flange10) DN 100 PN 250 EN 1092-1 Type B2 raised faced flange10) LD LB LC LE LF DN 100 PN 320 EN 1092-1 Type B2 raised faced flange10) DN 100 PN 400 EN 1092-1 Type B2 raised faced flange10) LG Fisher torque tube flange, carbon steel (249B) Fisher torque tube flange, 316 stainless steel (249C) Masoneilan torque tube flange, carbon steel MA MB MC Masoneilan torque tube flange, 316 stainless steel MD LH Order code Enter the total insertion length in plain text description, max. 610 cm (240.2 inch) Y01 Stainless steel tag. Measuring-point number/ identification (max. 27 characters); specify in plain text Y15 Inspection Certificate Type 3.1 per EN 10204 C12 Manufacturer’s test report (Hydrostatic Test) C18 NACE MR-0175 materials traceability D07 Operating Instructions Article No. English 7ML1998-5KA02 French 7ML1998-5KA11 German 7ML1998-5KA32 Multi-language Quick Start manual This device is shipped with the Siemens Milltronics manual DVD containing the ATEX Quick Start and Operating Instructions library. 7ML1998-5XG81 Accessories A5E03523523 Kit, spacer coax probe with parts SITRANS RD100 Remote display - see Chapter 7 1) Not available with O-ring option 21 (type Aegis PF128) SITRANS RD200 Remote display - see Chapter 7 2) Consult factory for these options in Hastelloy C or Monel 3) Available with O-ring option 23 only (none) 4) Coaxial steam probe must be used with O-ring option 21 only (type Aegis PF128) SITRANS RD500 web, datalogging, alarming, ethernet, and modem support for instrumentation see Chapter 7 5) Available with Material of Construction option A and D only [316/316L (1.4401/1.4404) stainless steel] 6) Available with Model option 5 only (coaxial steam probe) 7) 2" or DN 50 minimum Process Connection and available with PEEK Spacers for temperature maximum 345 °C (650 °F) 8) Used with Model option 2 only (coaxial High Temperature/High Pressure probe) 9) Process temperature maximum 345 °C (650 °F) 10) Available with model options 2, 3, and 5 only (High Temperature/ High Pressure, High Pressure, and Steam probes only) 11) Available with Material of Construction option E only (enlarged coaxial probe) 12) Not available with Enlarged Coaxial Material of construction E 7ML57501AA00-0 Siemens FI 01 · 2014 4/283 4 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data Article No. SITRANS LG200 Twin Rod Probes SITRANS LG200 twin rod probes are used in applications where coating and buildup are possible. Used in application with dielectric constant ≥1.9. 7ML1302- SITRANS LG200 Twin Rod Probes SITRANS LG200 twin rod probes are used in applications where coating and buildup are possible. Used in application with dielectric constant ≥1.9. 7ML1302- 7 7 7 7 7 - 77 7 0 Model option 1 and Material of Construction option A: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 1 and Material of Construction option A: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 1 and Material of Construction option A: 501 ... 610 cm (197.2 ... 240.2 inch) Note: In addition to the probe, please select a transmitter configuration to complete the SITRANS LG200 (ordered separately). For orders of 10 or more, please consult factory. Model Twin rigid rod Flexible twin rod bulk solids probe1) Flexible twin rod probe2) 4 Material of Construction 316/316L (1.4401/1.4404) stainless steel probe and process connection Standard lengths4) Model option 2,3 and Material of Construction option A: 1 m (39.4 inch) Model option 2,3 and Material of Construction option A: 2 m (78.7 inch) Model option 2,3 and Material of Construction option A: 3 m (118.1 inch) 1 2 3 A Process Connection (size/type) 2" NPT [(Taper), ANSI/ASME B1.20.1] G 2" [(BSPP), EN ISO 228-1] 2" 150 lb ASME raised face flange3) A1 A2 A3 2" 300 lb ASME raised face flange3) 3" 150 lb ASME raised face flange 2" 600 lb ASME raised face flange B1 B2 B3 3" 300 lb ASME raised face flange 4" 150 lb ASME raised face flange 3" 600 lb ASME raised face flange C1 C2 C3 4" 300 lb ASME raised face flange DN 50 PN 16 EN 1092-1 Type A flat faced flange 4" 600 lb ASME raised face flange D1 D2 DN 50 PN 25/40 EN 1092-1 Type A flat faced flange DN 80 PN 16 EN 1092-1 Type A flat faced flange DN 80 PN 25/40 EN 1092-1 Type A flat faced flange E1 DN 100 PN 16 EN 1092-1 Type A flat faced flange DN 100 PN 25/40 EN 1092-1 Type A flat faced flange Fisher Torque Tube flange, 316 stainless steel (249C) E4 Masoneilan Torque Tube flange, 316 stainless steel G1 Carbon steel Fisher Torque Tube flange, Carbon steel (249B) Masoneilan Torque Tube flange, Carbon steel K1 L1 D3 E2 E3 E5 F1 7 7 7 7 7 - 77 7 0 AD AE AF EA EB EC Model option 2,3 and Material of Construction option A: 4 m (157.5 inch) Model option 2,3 and Material of Construction option A: 5 m (196.9 inch) Model option 2,3 and Material of Construction option A: 6 m (236.2 inch) ED Model option 2,3 and Material of Construction option A: 7 m (275.6 inch) Model option 2,3 and Material of Construction option A: 8 m (315.0 inch) Model option 2,3 and Material of Construction option A: 9 m (354.3 inch) EG Model option 2,3 and Material of Construction option A: 10 m (393.7 inch)2)3) Model option 2,3 and Material of Construction option A: 11 m (433.1 inch)2)3) Model option 2,3 and Material of Construction option A: 12 m (472.4 inch)2)3) EK Model option 2,3 and Material of Construction option A: 13 m (511.8 inch)2)3) Model option 2,3 and Material of Construction option A: 14 m (551.2 inch)2)3) Model option 2,3 and Material of Construction option A: 15 m (590.6 inch)2)3) EN Model option 2,3 and Material of Construction option A: 16 m (629.9 inch)2)3) Model option 2,3 and Material of Construction option A: 17 m (669.3 inch)2)3) Model option 2,3 and Material of Construction option A: 18 m (708.7 inch)2)3) ER Model option 2,3 and Material of Construction option A: 19 m (748.0 inch)2)3) EU EE EF EH EJ EL EM EP EQ ES ET O-ring Viton EPDM (Ethylene Propylene Rubber) Kalrez 4079 1 1 1 2 1 3 Model option 2,3 and Material of Construction option A: 20 m (787.4 inch)2)3) Model option 2,3 and Material of Construction option A: 21 m (826.8 inch)2)3) EV HSN (Nitrile) Buna-N Neoprene 1 4 1 5 1 6 Model option 2,3 and Material of Construction option A: 22.5 m (885.8 inch)2)3) EX 1) 1 7 1 8 2 1 Available with O-ring 11 only Chemraz Polyurethane Aegis PF128 2) When used with model option 3, not suitable for dk<5 3) Available with model option 1 only 4) No Y01 needed in Order code Kalrez 2035 2 2 Probe Insertion Length Add Order code Y01 and plain text: "Insertion length ... cm" Model option 1 and Material of Construction option A: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 1 and Material of Construction option A: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 1 and Material of Construction option A: 201 ... 300 cm (79.1 ... 118.1 inch) 4/284 Siemens FI 01 · 2014 AA AB AC EW © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Order code Further designs Please add "-Z" to Article No. and specify Order code(s). Enter the total insertion length in plain text description, max. 610 cm (240.2 inch) Y01 Stainless steel tag. Measuring-point number/ identification (max. 27 characters); specify in plain text Y15 Inspection Certificate Type 3.1 per EN 10204 C12 Manufacturer’s test report (Hydrostatic Test)1) C18 NACE MR-0175 materials traceability D07 Operating Instructions Article No. English 7ML1998-5KA02 French 7ML1998-5KA11 German 7ML1998-5KA32 Multi-language Quick Start manual This device is shipped with the Siemens Milltronics manual DVD containing the ATEX Quick Start and Operating Instructions library. 7ML1998-5XG81 4 Accessories SITRANS RD100 Remote display - see Chapter 7 SITRANS RD200 Remote display - see Chapter 7 SITRANS RD500 web, datalogging, alarming, ethernet, and modem support for instrumentation see Chapter 7 7ML57501AA00-0 Siemens FI 01 · 2014 4/285 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data Article No. SITRANS LG200 Single Rod Rigid Probes SITRANS LG200 single rod rigid probes are used in applications where coating and buildup are likely. Used in applications with dielectric constant ≥10, or dk >1.9 when installed within 2 ... 6 inch of a metal tank wall or in cage or bridle. 7ML1303- SITRANS LG200 Single Rod Rigid Probes SITRANS LG200 single rod rigid probes are used in applications where coating and buildup are likely. Used in applications with dielectric constant ≥10, or dk >1.9 when installed within 2 ... 6 inch of a metal tank wall or in cage or bridle. 7ML1303- 77 7 7 7 - 777 0 AL6XN10) ¾" Tri-Clover 16 amp sanitary fitting9)10) 1½" Tri-Clover 16 amp sanitary fitting10) 2" Tri-Clover 16 amp sanitary fitting10) E0 E1 E2 2½" Tri-Clover 16 amp sanitary fitting10) 3" Tri-Clover 16 amp sanitary fitting10) 4" Tri-Clover 16 amp sanitary fitting10) E3 F1 G1 PFA Coated 316 stainless steel flange11) 2" 150 lb ASME raised face flange11) 2" 300 lb ASME raised face flange11) 3" 150 lb ASME raised face flange11) H1 H2 J1 E 3" 300 lb ASME raised face flange11) 4" 150 lb ASME raised face flange11) 4" 300 lb ASME raised face flange11) J2 K1 K2 F DN 50, PN 16, EN 1092-1 Type A flat faced flange11) L1 J DN 50, PN 25/40, EN 1092-1 Type A flat faced flange11) L2 DN 80, PN 16, EN 1092-1 Type A flat faced flange11) L3 DN 80, PN 25/40, EN 1092-1 Type A flat faced flange11) L4 Note: In addition to the probe, please select a transmitter configuration to complete the SITRANS LG200 (ordered separately). For orders of 10 or more, please consult factory. Model Single rod rigid probe1) High Temperature/High Pressure Single rod2)3) 4 Material of Construction 316/316L (1.4401/1.4404) stainless steel probe and process connection 316/316L (1.4401/1.4404) stainless steel sanitary probe and process connection1)4) PFA faced-flange and rod insulation, all PFA wetted parts (316 stainless steel rod)1)5) 316 AL6XN stainless steel sanitary probe and process connection1)6) PFA rod insulation (316 stainless steel rod and process connection) 7 7 7 7 7 - 77 7 0 1 2 A D Process Connection (size/type) 1 or 1½" Tri-Clover 16 amp sanitary fitting7) 2" NPT [(Taper), ANSI/ASME B1.20.1]8) G 2" [(BSPP), EN ISO 228-1]8) A1 A2 A3 2" 150 lb ASME raised face flange8) 2" 300 lb ASME raised face flange8) A4 A5 DN 100, PN 16, EN 1092-1 Type A flat faced flange11) L5 2" Tri-Clover 16 amp sanitary fitting7) A6 A7 B0 B1 DN 100, PN 25/40, EN 1092-1 Type A flat faced flange11) L6 ¾" Tri-Clover 16 amp sanitary fitting7) 9) 2½" Tri-Clover 16 amp sanitary fitting7) 3" 150 lb ASME raised face flange8) 3" 300 lb ASME raised face flange8) 3" Tri-Clover 16 amp sanitary fitting7) 4" 150 lb ASME raised face flange8) B2 B3 C1 4" 300 lb ASME raised face flange8) 4" Tri-Clover 16 amp sanitary fitting7) C2 C3 DN 50, PN 16, EN 1092-1 Type A flat faced flange8) D1 DN 50, PN 25/40, EN 1092-1 Type A flat faced flange8) D2 DN 80, PN 16, EN 1092-1 Type A flat faced flange8) D3 DN 80, PN 25/40, EN 1092-1 Type A flat faced flange8) D4 DN 100, PN 16, EN 1092-1 Type A flat faced flange8) D5 DN 100, PN 25/40, EN 1092-1 Type A flat faced flange8) D6 4/286 Siemens FI 01 · 2014 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data Article No. SITRANS LG200 Single Rod Rigid Probes SITRANS LG200 single rod rigid probes are used in applications where coating and buildup are likely. Used in applications with dielectric constant ≥10, or dk >1.9 when installed within 2 ... 6 inch of a metal tank wall or in cage or bridle. 7ML1303- SITRANS LG200 Single Rod Rigid Probes SITRANS LG200 single rod rigid probes are used in applications where coating and buildup are likely. Used in applications with dielectric constant ≥10, or dk >1.9 when installed within 2 ... 6 inch of a metal tank wall or in cage or bridle. 7ML1303- 77 7 7 7 - 777 0 Higher Pressure rated flanges ANSI/ASME flange8) 2" 600 lb ASME raised face 2" 900/1 500 lb ASME raised face flange12) 2" 2 500 lb ASME raised face flange12) M0 M1 M2 3" 600 lb ASME raised face flange8) 3" 900 lb ASME raised face flange12) 3" 1 500 lb ASME raised face flange12) N0 N3 N4 3" 2 500 lb ASME raised face flange12) 4" 600 lb ASME raised face flange8) 4" 900 lb ASME raised face flange12) N5 P0 P3 4" 1 500 lb ASME raised face flange12) 4" 2 500 lb ASME raised face flange12) 2" 600 lb ASME ring type joint flange8) P4 P5 Q0 2" 900/1 500 lb ASME ring type joint flange12) 2" 2 500 lb ASME ring type joint flange12) 3" 600 lb ASME ring type joint flange8) Q1 Q2 R0 3" 900 lb ASME ring type joint flange12) 3" 1 500 lb ASME ring type joint flange12) 3" 2 500 lb ASME ring type joint flange12) R3 R4 R5 4" 600 lb ASME ring type joint flange8) 4" 900 lb ASME ring type joint flange12) 4" 1 500 lb ASME ring type joint flange12) S0 S3 S4 4" 2 500 lb ASME ring type joint flange12) S5 EN flanges DN 50, PN 64, EN 1092-1 Type B2 raised faced flange8) DN 50, PN 100, EN 1092-1 Type B2 raised faced flange8) DN 50, PN 160, EN 1092-1 Type B2 raised faced flange12) DN 50, PN 250, EN 1092-1 Type B2 raised faced flange12) DN 80, PN 64, EN 1092-1 Type B2 raised faced flange8) DN 80, PN 100, EN 1092-1 Type B2 raised faced flange8) 7 7 7 7 7 - 77 7 0 T0 T1 T2 T3 U0 4 U1 DN 80, PN 160, EN 1092-1 Type B2 raised faced flange12) DN 80, PN 250, EN 1092-1 Type B2 raised faced flange12) DN 100, PN 64, EN 1092-1 Type B2 raised faced flange8) U2 DN 100, PN 100, EN 1092-1 Type B2 raised faced lange8) DN 100, PN 160, EN 1092-1 Type B2 raised faced flange12) DN 100, PN 250, EN 1092-1 Type B2 raised faced flange12) V1 U3 V0 V2 V3 Siemens FI 01 · 2014 4/287 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 4 Selection and Ordering data Article No. Selection and Ordering data Article No. SITRANS LG200 Single Rod Rigid Probes SITRANS LG200 single rod rigid probes are used in applications where coating and buildup are likely. Used in applications with dielectric constant ≥10, or dk >1.9 when installed within 2 ... 6 inch of a metal tank wall or in cage or bridle. 7ML1303- SITRANS LG200 Single Rod Rigid Probes SITRANS LG200 single rod rigid probes are used in applications where coating and buildup are likely. Used in applications with dielectric constant ≥10, or dk >1.9 when installed within 2 ... 6 inch of a metal tank wall or in cage or bridle. 7ML1303- 77 7 7 7 - 777 0 O-ring Viton EPDM (Ethylene Propylene Rubber) Kalrez 4079 1 1 1 1 2 3 HSN (Nitrile) Buna-N Neoprene 1 1 1 4 5 6 Chemraz Polyurethane Aegis PF128 1 1 2 7 8 1 Kalrez 2035 None1) 2 2 2 3 Probe Insertion Length Add Order code Y01 and plain text: "Insertion length ... cm" Model option 1, 2 and Material of Construction option A: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 1, 2 and Material of Construction option A: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 1, 2 and Material of Construction option A: 201 ... 300 cm (79.1 ... 118.1 inch) Model option 1 and Material of Construction option E: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 1 and Material of Construction option E: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 1 and Material of Construction option E: 501 ... 610 cm (197.2 ... 240.2 inch) Add Order code Y01 and plain text: "Insertion length ... cm" Model option 1 and Material of Construction option J: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 1 and Material of Construction option J: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 1 and Material of Construction option J: 201 ... 300 cm (79.1 ... 118.1 inch) AA AB AC Model option 1, 2 and Material of Construction option A: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 1, 2 and Material of Construction option A: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 1, 2 and Material of Construction option A: 501 ... 610 cm (197.2 ... 240.2 inch) Add Order code Y01 and plain text: "Insertion length ... cm" Model option 1 and Material of Construction option D: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 1 and Material of Construction option D: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 1 and Material of Construction option D: 201 ... 300 cm (79.1 ... 118.1 inch) AD Model option 1 and Material of Construction option D: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 1 and Material of Construction option D: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 1 and Material of Construction option D: 501 ... 610 cm (197.2 ... 240.2 inch) Add Order code Y01 and plain text: "Insertion length ... cm" Model option 1 and Material of Construction option F: 60 ... 100 cm (23.6 ... 39.4 inch) Model option 1 and Material of Construction option F: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 1 and Material of Construction option F: 201 ... 300 cm (79.1 ... 118.1 inch) BD Model option 1 and Material of Construction option F: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 1 and Material of Construction option F: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 1 and Material of Construction option F: 501 ... 610 cm (197.2 ... 240.2 inch) Add Order code Y01 and plain text: "Insertion length ... cm" Model option 1 and Material of Construction option E: 60 ... 100 cm (23.6 ... 39.4 inch) CD Model option 1 and Material of Construction option E: 101 ... 200 cm (39.8 ... 78.7 inch) Model option 1 and Material of Construction option E: 201 ... 300 cm (79.1 ... 118.1 inch) DB 4/288 Siemens FI 01 · 2014 7 7 7 7 7 - 77 7 0 AE AF Model option 1 and Material of Construction option J: 301 ... 400 cm (118.5 ... 157.5 inch) Model option 1 and Material of Construction option J: 401 ... 500 cm (157.9 ... 196.9 inch) Model option 1 and Material of Construction option J: 501 ... 610 cm (197.2 ... 240.2 inch) Add Order code Y01 and plain text: "Insertion length ... cm" (¾" process connection only) Model option 1 and Material of Construction option D and F: 60 ... 100 cm (23.6 ... 39.4 inch)13) Model option 1 and Material of Construction option D and F: 101 ... 180 cm (39.8 ... 72 inch)13) DD DE DF EA EB EC ED EE EF FA FB 1) Model option 1 with Material of construction options D, E, F, available with O-ring option 23 only 2) Available with O-ring option 21 only 3) Available with Material of construction option A only 4) Available with Process connection options A1, A6, A7, B0, B3, C3 only BB 5) Available with Process connection options H1, H2, J1, J2, K1, K2, L1, L2, L3, L4, L5, L6 only. BC 6) Available with Process connection options E0, E1, E2, E3, F1, G1 only 7) Available with Material of construction option D only 8) Available with Material of construction options A and J only 9) Available with Probe Insertion Length options FA and FB only 10) Available with Material of construction option F only 11) Available with Material of construction option E only 12) Available with Model option 2 only 13) Available with Process connection options A7 and E0 only (¾”) BA BE BF CA CB CC CE CF DA DC © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Order code Further designs Please add "-Z" to Article No. and specify Order code(s). Enter the total insertion length in plain text description, max. 610 cm (240.2 inch) Y01 Stainless steel tag. Measuring-point number/ identification (max. 27 characters); specify in plain text Y15 Inspection Certificate Type 3.1 per EN 10204 C12 Manufacturer’s test report (Hydrostatic Test) C18 NACE MR-0175 materials traceability D07 Operating Instructions Article No. English 7ML1998-5KA02 French 7ML1998-5KA11 German 7ML1998-5KA32 Multi-language Quick Start manual This device is shipped with the Siemens Milltronics manual DVD containing the ATEX Quick Start and Operating Instructions library. 7ML1998-5XG81 4 Accessories TFE bottom spacer/endplate 7ML1930-1DJ SITRANS RD100 Remote display - see Chapter 7 SITRANS RD200 Remote display - see Chapter 7 SITRANS RD500 web, datalogging, alarming, ethernet, and modem support for instrumentation see Chapter 7 7ML57501AA00-0 1) C18 only available with Model 1 Siemens FI 01 · 2014 4/289 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data Article No. SITRANS LG200 Single Rod Flexible Probes SITRANS LG200 single rod flexible probes are used in applications where coating and buildup are possible. Used in applications with dielectric constant ≥10 or dk >1.9 when installed within 2 ... 6" of a metal tank wall or in cage or bridle. For solids version only, dk>4. 7ML1304- SITRANS LG200 Single Rod Flexible Probes SITRANS LG200 single rod flexible probes are used in applications where coating and buildup are possible. Used in applications with dielectric constant ≥10 or dk >1.9 when installed within 2 ... 6" of a metal tank wall or in cage or bridle. For solids version only, dk>4. 7ML1304- 77 7 7 7 - 777 0 Note: In addition to the probe, please select a transmitter configuration to complete the SITRANS LG200 (ordered separately). For orders of 10 or more, please consult factory. Model Single rod flexible probe Single rod bulk solids flexible probe1) 4 Material of Construction 316/316L (1.4401/1.4404) stainless steel probe and process connection 1 2 A 7 7 7 7 7 - 77 7 0 Flexible Rod Length (To be shortened by customer as required) 1 m (39.4 inch) 2 m (78.7 inch) 3 m (118.1 inch) AA AB AC 4 m (157.5 inch) 5 m (196.9 inch) 6 m (236.2 inch) AD AE AF 7 m (275.6 inch) 8 m (315.0 inch) 9 m (354.3 inch) AG AH AJ 10 m (393.7 inch) 11 m (433.1 inch) 12 m (472.4 inch) AK AL AM 13 m (511.8 inch) 14 m (551.2 inch) 15 m (590.6 inch) AN AP AQ 16 m (629.9 inch) 17 m (669.3 inch) AR AS Process Connection (size/type) 316/316L (1.4401/1.4404) 2" NPT [(Taper), ANSI/ASME B1.20.1] G 2" [(BSPP), EN ISO 228-1] 2" 150 lb ASME raised face flange A0 A1 A2 2" 300 lb ASME raised face flange 3" 150 lb ASME raised face flange 3" 300 lb ASME raised face flange A3 B1 B2 4" 150 lb ASME raised face flange 4" 300 lb ASME raised face flange DN 50 PN 16 EN 1092-1 Type A flat faced flange C1 C2 D1 18 m (708.7 inch) 19 m (748.0 inch) AT AU 20 m (787.4 inch) AV DN 50 PN 25/40 EN 1092-1 Type A flat faced flange DN 80 PN 16 EN 1092-1 Type A flat faced flange DN 80 PN 25/40 EN 1092-1 Type A flat faced flange D2 E1 E2 21 m (826.8 inch) 22.5 m (885.8 inch) AW AX DN 100 PN 16 EN 1092-1 Type A flat faced flange DN 100 PN 25/40 EN 1092-1 Type A flat faced flange F1 F2 1) Available with O-ring option 1 1 only (others on request) Selection and Ordering data O-ring Viton EPDM (Ethylene Propylene Rubber) Kalrez 4079 1 1 1 1 2 3 HSN (Nitrile) Buna-N Neoprene 1 1 1 4 5 6 Chemraz Polyurethane Aegis PF128 1 1 2 7 8 1 Kalrez 2035 2 2 Order code Further designs Please add "-Z" to Article No. and specify Order code(s). Stainless steel tag. Measuring-point number/ identification (max. 27 characters); specify in plain text Y15 Operating Instructions Article No. English 7ML1998-5KA02 French 7ML1998-5KA11 German 7ML1998-5KA32 Multi-language Quick Start manual This device is shipped with the Siemens Milltronics manual DVD containing the ATEX Quick Start and Operating Instructions library. 7ML1998-5XG81 Accessories SITRANS RD100 Remote display - see Chapter 7 SITRANS RD200 Remote display - see Chapter 7 SITRANS RD500 web, datalogging, alarming, ethernet, and modem support for instrumentation see Chapter 7 4/290 Siemens FI 01 · 2014 7ML57501AA00-0 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Selection and Ordering data Article No. Selection and Ordering data SITRANS LG200 Chamber Replacement Probe Replaces existing aging torque tube transmitters. Proprietary flanges can be used with existing chambers and cages. 7ML1305- Further designs 77 7 7 7 - 777 0 Please add "-Z" to Article No. and specify Order code(s). Note: In addition to the probe, please select a transmitter configuration to complete the SITRANS LG200 (ordered separately). For this option, please consult factory Model Chamber Replacement Probe1) Chamber/Process Connection Material of Construction 316/316L stainless steel (B31.1 construction) Carbon steel (106 Grade B)2) Carbon steel (B31.1 construction) 1 A B C Process Connection (size/type) 1½" NPT [(Taper), ANSI/ASME B1.20.1] thread 1½", 150 lb ASME raised face flange 1½", 300 lb ASME raised face flange A0 A1 A2 1½", 600 lb ASME raised face flange 1½" Socket weld 2" NPT [(Taper), ANSI/ASME B1.20.1] thread A3 B1 B2 2", 150 lb ASME raised face flange 2", 300 lb ASME raised face flange 2", 600 lb ASME raised face flange C1 C2 D1 2" Socket weld Other flange sizes available. Please consult factory. D2 Level Range 14 inch (0.356 meters) Other level ranges available. Please consult factory. Process Connection Configuration Top In, Bottom Out Top In, Bottom Out, with Sight Glass Connections Other configurations available. Please consult factory. Temperature Range 316 °C (600 °F) (Dielectric constant ≥ 10) 260 °C (500 °F) (Dielectric constant ≥ 1.4) Order code Stainless steel tag. Measuring-point number/ identification (max. 27 characters); specify in plain text Y15 Inspection Certificate Type 3.1 per EN 10204 C12 NACE MR-0175 materials traceability D07 Operating Instructions Article No. English 7ML1998-5KA02 French 7ML1998-5KA11 German 7ML1998-5KA32 Multi-language Quick Start manual This device is shipped with the Siemens Milltronics manual DVD containing the ATEX Quick Start and Operating Instructions library. 7ML1998-5XG81 4 Accessories SITRANS RD100 Remote display - see Chapter 7 SITRANS RD200 Remote display - see Chapter 7 SITRANS RD500 web, datalogging, alarming, ethernet, and modem support for instrumentation see Chapter 7 7ML57501AA00-0 1 1 2 A B Chamber Type Fisher 249B Fisher 259B Fisher 249 1) Probe is always 316/316L (1.4401/1.4404) stainless steel construction regardless of chamber and process connection materials. 2) Available Process Connection Configuration option 1 only A B C Siemens FI 01 · 2014 4/291 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Ambient temperature ■ Characteristic curves 93 °C (200 °F) 82 °C (180 °F) 71 °C (160 °F) 60 °C (140 °F) 49 °C (120 °F) 38 °C (100 °F) 4 27 °C (80 °F) 16 °C (60 °F) 4 °C (40 °F) -6 °C (20 °F) -17 °C (0 °F) 38 °C (100 °F) 66 °C (150 °F) 93 °C (200 °F) 121 °C (250 °F) Process pressure Ambient temperature vs process temperature 7ML1301-1, 1302-1, 1303-1, 1302-3 149 °C (300 °F) 177 °C (350 °F) 204 °C (400 °F) Process temperature 83 bar g (1 200 psi g) 76 bar g (1 100 psi g) 69 bar g (1 000 psi g) 62 bar g (900 psi g) 55 bar g (800 psi g) 48 bar g (700 psi g) 41 bar g (600 psi g) 35 bar g (500 psi g) 28 bar g (400 psi g) 21 bar g (300 psi g) 14 bar g (200 psi g) 7 bar g (100 psi g) 0 bar g (0 psi g) 10 °C (50 °F) 66 °C (150 °F) 121 °C (250 °F) Process temperature [max. +204 °C (+400 °F)] 7ML1304-1, 1301-1, 1303-1, 7ML1302-3, 1302-1, 1301-4, 1301-6 SITRANS LG200 Process Pressure/Temperature derating curves 4/292 Siemens FI 01 · 2014 177 °C (350 °F) 232 °C (450 °F) Process temperature © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 Process pressure 241 bar g (3 500 psi g) 207 bar g (3 000 psi g) 172 bar g (2 500 psi g) 138 bar g (2 000 psi g) 103 bar g (1 500 psi g) 4 69 bar g (1 000 psi g) 34 bar g (500 psi g) 0 bar g (0 psi g) -17 °C (0 °F) 93 °C (200 °F) 7ML1301-5 [max. 343 °C (650 °F)] 204 °C (400 °F) 316 °C (600 °F) 427 °C (800 °F) Process temperature 7ML1303-2 [max. 318 °C (605 °F)] Process pressure 448 bar g (6 500 psi g) 413 bar g (6 000 psi g) 379 bar g (5 500 psi g) 345 bar g (5 000 psi g) 310 bar g (4 500 psi g) 276 bar g (4 000 psi g) 241 bar g (3 500 psi g) 207 bar g (3 000 psi g) 172 bar g (2 500 psi g) 138 bar g (2 000 psi g) 103 bar g (1 500 psi g) 69 bar g (1 000 psi g) 34 bar g (500 psi g) 0 bar g (0 psi g) -196 °C -129 °C -73 °C -17 °C 38 °C 93 °C 149 °C 204 °C 260 °C 316 °C 371 °C 427 °C (-320 °F) (-200 °F) (-100 °F) (0 °F) (100°F) (200 °F) (300 °F) (400 °F) (500 °F) (600 °F) (700 °F) (800 °F) 7ML1301-3 [max. 204 °C (400 °F)] Process temperature 7ML1301-2 [max. 427 °C (800 °F)] SITRANS LG200 Process Pressure/Temperature derating curves Siemens FI 01 · 2014 4/293 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 ■ Dimensional drawings SITRANS LG200 enclosure 7ML1300 7ML1301-1 (7xA-x) probe, threaded and flanged connection 120 (4.7) 2 cable entries ½" NPT or M20x1.5 Enclosure 74 (2.91) Lid with window 59 (2.32) 14 (0.55) M20: 135 (5.32) ½" NPT: 150 (5.91) 38 (1 1/2) 22 or 45 (dependant on option) Process connection 22 or 45 (dependant on option) Probe insertion length Optional spacer 60 (2.36) 60 (2.36) [123 (4.84)] 7ML1303-1D (7xF-E) probe, sanitary connection 12 (0.5) dia. rod D 12 (0.5) dia. rod probe insertion length Probe insertion length B A 14 (0.55) 57 (2.24) [123 (4.84)] 7ML1303-1 (7xF-x) probe, threaded and flanged connection [7ML1303-2 HT Probe (7xJ-x)] Probe insertion length D Process connection Optional spacer 12 (0.5) dia. rod C 166 (6.54) 153 (6.02) 4 Probe insertion length B A Lid without window Probe connections and insertion lengths (Note: BSP connections differ from NPT) 22 or 45 (dependant on option) ANSI or DIN welded flange Insertion length Insertion length C B Insertion length Insertion length A 22 or 45 (dependant on option) Sanitary flange 22 or 45 (dependant on option) D BSP NPT 22 or 45 (dependant on option) SITRANS LG200 (threaded process connection dimensions shown are NPT connections unless stated otherwise), dimensions in mm (inch) 4/294 Siemens FI 01 · 2014 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 SITRANS LG200 7ML1304-1 (7x1-x) flexible probe, Threaded or flanged connection 44 (1.75) 76 (3) 5 (0.1875) Dia. cable 19 (0.75) 32 (1.25) 57 (2.25) 99 (3.88) 12 (0.5) Dia. hole 14 (0.56) 83 (3.25) 7ML1304-2 (7x2-x) bulk solids flexible probe, Threaded or flanged connection 80 (3.13) Mounting flange Probe insertion length D 6 (0.25) Dia. cable Threaded process connection Probe insertion length B A 76 (3) 60 (2.36) FEP webbing 50 (2) dia. 50 (2) dia. 19 (0.75) 99 (3.88) 25 (1) 57 (2.25) 16 (0.625) with PFA lining TFE spacer 284 g (10 oz) TFE weight 284 g (10 oz) TFE weight 12 (0.5) Dia. hole Probe insertion length D 12 (0.5) Rod diameter Probe insertion length B A FEP webbing Mounting flange 71 (2.80) 20.3 (0.8) 76 (3) TFE spacer 450 g (1 lb) TFE weight 7ML1303-1E (7xF - F) porobe, Flat-faced flanged connection Threaded process connection Probe insertion length D 60 (2.36) Probe insertion length D 57 (2.24) Probe insertion length B A 610 (24) 14 (0.56) Threaded Mounting flange process connection 5 (0.1875) Dia. cable 450 g (1 lb) TFE weight 7ML1302-3 (7x7-x) twin rod flexible probe, Threaded or flanged connection 2.25 kg (5 lb) AISI 316 weight 152 (6.00) 2.25 kg (5 lb) AISI 316 weight 50 (2) Dia. SITRANS LG200 (threaded process connection dimensions shown are NPT connections unless stated otherwise), dimensions in mm (inch) Siemens FI 01 · 2014 4/295 4 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 SITRANS LG200 7ML1302-1 (7xB-x) twin rod probe, threaded and flanged connection FEP webbing 5 (0.1875) dia. cable 2.25 kg (5 lb) AISI 316 weight 2.25 kg (5 lb) AISI 316 weight 152 (6) 22.2 (0.875) TFE spacer Ø13 (0.50) rods 6.3 (0.248) Probe insertion length D FEP webbing Mounting flange 76 (3) 80 (3.13) TFE spacer Probe insertion length B A Probe insertion length D TFE spacer 76 (3) 126 (4.96) Probe insertion length B A Mounting flange Twin rod end view 50 (2) dia. 7ML1301-2 (7xD-x), 7ML1301-3 (7xP-x), 7ML1301-4 (7xR-x), 7ML1301-6 (7xT-x), threaded or flanged connection 120 (4.7) 120 (4.7) Probes Enclosure 'X' Process connection ‘X’ Dimension (NPT) ‘X’ Dimension (flanged) 7ML1301-2 (coaxial HT/HP probe) 217 (8.55) 277 (10.91) 7ML1301-3 (coaxial HP probe) 106 (4.18) 166 (6.54) 7ML1301-4 (coaxial overfill/ flooded cage probe), 7ML1301-6 (coaxial interface probe) 150 (5.89) 167 (6.57) 7ML1301-5 (coaxial HT/ HP steam probe) 180 (7.10) 242 (9.52) Probe insertion length D Probe insertion length B A Process connection 'X' Enclosure 14 (0.56) 4 TFE spacer Threaded process connection 20.3 (0.8) 20.3 (0.8) Threaded process connection 83 (3.25) 129 (5.08) 7ML1302-2 (7x5-x) twin rod bulk solids flexible probe threaded or flanged connection SITRANS LG200 (threaded process connection dimensions shown are NPT connections unless stated otherwise), dimensions in mm (inch) 4/296 Siemens FI 01 · 2014 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 A Min. 156 (6.1) A 100 % 100 % 3/4" NPT (optional sight glass connections) Midrange B A Midrange Midrange Max. level range Min. 356 (14) Maz. 6 100 (240) 0% 0% Min. 76 (3) B Min. 1½" : 64 (2.5) Min. 2" : 86 (3.4) 100 % Max. level range Min. 356 (14) Maz. 6 100 (240) Min. 76 (3) 4 Min. 94 (3.7) A 100 % Midrange Max. level range Min. 356 (14) Maz. 6 100 (240) 0% 0% B Min. 1½" : 102 (4.1) Min. 2" : 110 (43) Min. 76 (3) B Min. 76 (3) SITRANS LG200 - Model 7ML1305-1 Chamber Replacement Probe, dimensions in mm (inch) Siemens FI 01 · 2014 4/297 © Siemens AG 2014 Level measurement Continuous level measurement — Guided wave radar transmitters SITRANS LG200 ■ Schematics SITRANS LG200 general purpose wiring 4 Intrinsically safe wiring When connecting SITRANS LG200 in Intrinsically safe applications, install an approved IS barrier in the non-hazardous (safe) area. Explosion proof wiring When connecting SITRANS LG200 in hazardous areas with explosion hazard, the wiring for the transmitter must be contained in explosion proof conduit extending into the safe area. An explosion proof conduit fitting is not required within 457 mm (18 inch) of the transmitter. An explosion proof conduit fitting is required between the hazardous and safe areas. SITRANS LG200 connections 4/298 Siemens FI 01 · 2014