Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC669LP3 / 669LP3E v04.0709 Amplifiers - Low Noise - SMT 7 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz Typical Applications Features The HMC669LP3(E) is ideal for: Noise Figure: 1.4 dB • Cellular/3G and LTE/WiMAX/4G Output IP3: +29 dBm • BTS & Infrastructure Gain: 17 dB • Repeaters and Femtocells Failsafe Operation: Bypass is enabled when LNA is unpowered • Tower Mounted Amplifiers Single Supply: +3V or +5V • Test & Measurement Equipment 16 Lead 3x3mm QFN Package: 9 mm 2 Functional Diagram General Description The HMC669LP3(E) is a versatile, high dynamic range GaAs MMIC Low Noise Amplifier that integrates a low loss LNA bypass mode on the IC. The amplifier is ideal for receivers and LNA modules operating between 1.7 and 2.2 GHz and provides 1.4 dB noise figure, 17 dB of gain and +29 dBm IP3 from a single supply of +5V @ 86mA. Input and output return losses are excellent and no external matching components are required. A single control line is used to switch between LNA mode and a low loss bypass mode. Failsafe topology also enables the LNA bidirectional bypass path when no DC power is available. Electrical Specifications, TA = +25° C, Rbias = 15 Ohm LNA Mode Parameter Vdd = +3V Min. Frequency Range Gain Max. Min. 1.7 - 2.2 12 Gain Variation Over Temperature Typ. Bypass Mode Vdd = +5V Typ. Max. Min. 1.7 - 2.2 15 14 0.015 Min. -3 -2.1 Typ. 1.7 - 2.2 -3 Units Max. GHz -2.1 dB 0.0008 0.0008 dB / °C Noise Figure 1.4 Input Return Loss 10 11 12 12 dB Output Return Loss 13 13 12 12 dB Reverse Isolation 28 30 - - dB 11.5 12 21 24 dBm Power for 1dB Compression (P1dB)[1] Third Order Intercept (IP3)[2] 25 Supply Current (Idd) 49 1.4 Max. 1.7 - 2.2 17 0.014 1.65 Typ. Failsafe Mode 1.65 29 59 86 105 dB 25 25 dBm 0.04 - mA 80 - ns ns Switching Speed LNA Mode to Bypass Mode Bypass Mode to LNA Mode 100 100 [1] P1dB for LNA Mode is referenced to RFOUT while P1dB for Bypass and Failsafe Modes are referenced to RFIN. [2] IP3 for LNA Mode is referenced to RFOUT while IP3 for Bypass and Failsafe Modes are referenced to RFIN. 7-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC669LP3 / 669LP3E v04.0709 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz LNA - Broadband Gain & Return Loss 25 S21 15 20 10 Vdd=5V Vdd=3V 0 GAIN (dB) 18 5 S22 -5 -10 16 14 -15 +25C +85C -40C S11 -20 12 -25 -30 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 FREQUENCY (GHz) 2.6 2.8 10 1.6 3 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 0 22 +25C +85C -40C -5 RETURN LOSS (dB) 20 18 GAIN (dB) 1.8 LNA - Return Loss vs. Temperature [1] LNA - Gain vs. Temperature [2] 16 14 Input Return Loss -10 -15 Output Return Loss -20 +25C +85C -40C -25 12 10 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 -30 1.6 2.3 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 LNA - Output IP3 vs. Temperature, Output Power @ 0 dBm LNA - Noise Figure vs. Temperature [3] 2 34 +85C 1.8 Vdd=5V +25C 30 1.6 1.4 IP3 (dBm) NOISE FIGURE (dB) 1.7 Amplifiers - Low Noise - SMT 22 20 RESPONSE (dB) 7 LNA - Gain vs. Temperature [1] 1.2 1 0.8 0.4 1.6 [1] Vdd = 5V 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) [2] Vdd = 3V 22 18 Vdd=5V Vdd=3V -40C 0.6 26 2.2 2.3 14 1.6 Vdd=3V 1.7 1.8 +25C +85C -40C 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 [3] Measurement reference plane shown on evaluation PCB drawing. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7-2 HMC669LP3 / 669LP3E v04.0709 7 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz LNA - Output P1dB vs. Temperature [1] LNA - Output P1dB vs. Temperature [2] 16 18 14 12 P1dB (dBm) 14 12 10 8 +25C +85C -40C 4 2 1.6 8 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2 1.6 2.3 45 18 16 41 16 Gain 33 12 29 10 IP3 25 8 75 80 85 90 1.8 1.9 2 2.1 FREQUENCY (GHz) Gain 38 34 14 P1dB 12 30 IP3 26 10 22 8 95 40 45 18 GAIN (dB) & P1dB (dBm) -15 +25C +85C -40C -25 -30 -35 [1] Vdd = 5V 7-3 1.9 2 2.1 FREQUENCY (GHz) [2] Vdd = 3V 2.2 2.3 2 1.8 P1dB Gain 16 1.6 14 1.4 12 1.2 10 1 NF 0.8 8 3 3.5 4 4.5 5 Voltage Supply (V) [3] Measurement reference plane shown on evaluation PCB drawing. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] NOISE FIGURE (dB) ISOLATION (dB) 20 1.8 55 LNA - Output P1dB, Gain & Noise Figure [3] vs. Vdd @ 1900 MHz -10 1.7 50 Idd (mA) LNA - Reverse Isolation vs. Temperature [1] -40 1.6 2.3 42 Idd (mA) -20 2.2 IP3 (dBm) 37 P1dB 70 1.7 LNA - Gain, P1dB, Output IP3 vs. Current [2] @ 1900 MHz 18 14 +25C +85C -40C 4 LNA - Gain, P1dB, Output IP3 vs. Current [1] @ 1900 MHz GAIN (dB) , P1dB (dBm) 10 6 6 GAIN (dB) , P1dB (dBm) P1dB (dBm) 16 IP3 (dBm) Amplifiers - Low Noise - SMT 20 HMC669LP3 / 669LP3E v04.0709 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz Bypass Mode Broadband Gain & Return Loss Bypass Mode Input IP3 vs. Output Power @ 1900 MHz -2 -6 IP3 (dBm) RESPONSE (dB) +25C +85C -40C 35 -4 S21 S11 S22 -8 -10 -12 30 25 20 -14 1 1.2 1.4 1.6 1.8 2 2.2 2.4 FREQUENCY (GHz) 2.6 2.8 15 -10 3 Bypass Mode - Input IP3 vs. Temperature, Output Power @ 5 dBm +25C +85C -40C GAIN (dB) IP3 (dBm) 10 15 +25C +85C -40C -1 24 20 -2 -3 -4 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 -5 1.6 2.3 Bypass Mode Input Return Loss vs. Temperature 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 Bypass Mode Output Return Loss vs. Temperature 0 0 +25C +85C -40C -5 +25C +85C -40C -5 RETURN LOSS (dB) RETURN LOSS (dB) 5 Pout (dBm) 0 28 -10 -15 -20 1.6 0 Bypass Mode Insertion Loss vs. Temperature 32 16 1.6 -5 Amplifiers - Low Noise - SMT 40 0 -16 0.8 7 -10 -15 -20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 -25 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7-4 HMC669LP3 / 669LP3E v04.0709 7 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz Failsafe Mode Broadband Gain & Return Loss Failsafe Mode Input IP3 vs. Output Power @ 1900 MHz 40 -2 IP3 (dBm) RESPONSE (dB) -6 S21 S11 S22 -8 -10 -12 30 25 20 -14 -16 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 FREQUENCY (GHz) 2.6 2.8 15 -10 3 Failsafe Mode - Input IP3 vs. Temperature, Output Power @ 5 dBm +25C +85C -40C 24 10 15 -2 -3 -4 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 -5 1.6 2.3 Failsafe Mode Input Return Loss vs. Temperature 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 Failsafe Mode Output Return Loss vs. Temperature 0 0 +25C +85C -40C -5 +25C +85C -40C -5 RETURN LOSS (dB) RETURN LOSS (dB) 5 Pout (dBm) +25C +85C -40C -1 GAIN (dB) 28 -10 -15 -20 1.6 0 0 32 16 1.6 -5 Failsafe Mode Insertion Loss vs. Temperature 20 7-5 +25C +85C -40C 35 -4 IP3 (dBm) Amplifiers - Low Noise - SMT 0 -10 -15 -20 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 -25 1.6 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC669LP3 / 669LP3E GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz Absolute Maximum Ratings Drain Bias Voltage (Vdd) +6 Vdc Control Voltage (Vctl) +6 Vdc RF Input Power (RFIN) +5 dBm +20 dBm LNA Mode Bypass / Fail safe Mode Channel Temperature Continuous Pdiss (T = 85 °C) (derate 10.71 mW/°C above 85 °C) 150 °C 0.70 W 7 Typical Supply Current vs. Vdd Rbias Ω Idd (mA) Vdd= 3V Vdd= 5V 0 55 95 15 49 86 41 73 28 50 47 180 [1] [1] Recommended maximum Rbias Thermal Resistance (channel to ground paddle) 93.33 °C/W Storage Temperature -65 to +150° C Operating Temperature -40 to +85° C ESD Sensitivity (HBM) Class 1A Truth Table LNA Mode Vctl = Vdd = 3 to 5V Bypass Mode Vctl= 0V, Vdd = 3 to 5V Failsafe Mode Vctl = Vdd = N/C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Amplifiers - Low Noise - SMT v04.0709 7-6 HMC669LP3 / 669LP3E v04.0709 Outline Drawing Amplifiers - Low Noise - SMT 7 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC669LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC669LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] 669 XXXX 669 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 7-7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC669LP3 / 669LP3E v04.0709 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz Pin Number Function Description 1, 2, 5, 8, 11, 12, 13, 15 N/C These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 3 RFIN This pin is DC coupled. Off-chip DC blocking capacitor required. 4, 9 GND These pins and the exposed ground paddle must be connected to RF/DC ground. 6 ACG AC Ground. Attach bypass capacitor per application circuit. 7 RES External resistor pin for current control. See table for external resistor value vs. bias current data. 10 RFOUT This pin is matched to 50 Ohms 14 Vdd Power Supply voltage pin. External bypass capacitors required. 16 Vctl Control voltage pin for LNA / Bypass Modes. Setting voltage equal to VDD enables LNA Mode. External Bypass capacitor required. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Amplifiers - Low Noise - SMT 7 Pin Descriptions 7-8 HMC669LP3 / 669LP3E v04.0709 Application Circuit Amplifiers - Low Noise - SMT 7 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz 7-9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC669LP3 / 669LP3E v04.0709 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 1700 - 2200 MHz 7 Amplifiers - Low Noise - SMT Evaluation PCB List of Materials for Evaluation PCB 121923 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1 82 pF Capacitor, 0402 Pkg. C2 8200 pF Capacitor, 0402 Pkg. C3 10 nF Capacitor, 0603 Pkg. C4 1 µF Capacitor, 0603 Pkg. C5 100 pF Capacitor, 0603 Pkg. R1 15 Ohm Resistor, 0402 Pkg. R2 0 Ohm Resistor, 0402 Pkg. U1 HMC669LP3(E) Amplifier PCB [2] 118911 Evaluation Board The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 7 - 10