Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC453ST89 / 453ST89E v02.0710 9 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Typical Applications Features The HMC453ST89 / HMC453ST89E is ideal for applications requiring a high dynamic range amplifier: Output IP3: +49 dBm • GSM, GPRS & EDGE 7.5 dB Gain @ 2100 MHz • CDMA & W-CDMA 41% PAE @ +32.5 dBm Pout • CATV/Cable Modem +26 dBm CDMA2000 Channel Power @ -45 dBc ACP 20.5 dB Gain @ 400 MHz • Fixed Wireless AMPLIFIERS - LINEAR & POWER - SMT Included in the HMC-DK002 Designer’s Kit Functional Diagram General Description The HMC453ST89 & HMC453ST89E are high dynamic range GaAs InGaP HBT 1.6 Watt MMIC power amplifiers operating from 0.4 to 2.2 GHz and packaged in industry standard SOT89 packages. Utilizing a minimum number of external components and a single +5V supply, the amplifier output IP3 can be optimized to +47 dBm at 0.4 GHz or +49 dBm at 2.1 GHz. The high output IP3 and PAE make the HMC453ST89 & HMC453ST89E ideal power amplifiers for Cellular/ PCS/3G and Fixed Wireless applications. Electrical Specifi cations, TA = +25°C, Vs= +5V [1] Parameter Min. Frequency Range Gain Typ. Max. Min. 400 - 410 18 Gain Variation Over Temperature Max Min. 450 - 496 20.5 0.012 Typ. 16.5 0.02 Max. Min. 810 - 960 19 0.012 Typ. 12 0.02 Max. Min. 1710 - 1990 14.5 0.012 Typ. 6 0.02 Max. 2010 - 2170 8.5 0.012 Typ. 6 0.02 Units MHz 7.5 dB 0.012 dB / °C 0.02 Input Return Loss 20 14 20 15 13 dB Output Return Loss 12 12 13 15 18 dB 32.5 dBm 32.75 dBm 49 dBm Output Power for 1dB Compression (P1dB) 28.5 Saturated Output Power (Psat) Output Third Order Intercept (IP3) [2] Noise Figure Supply Current (Icq) 31.5 29 32 44 47 32 28.5 32.25 45 48 31.5 29 31.75 44 47 32 29.5 32.5 46 49 46 9 9 6.5 7 6.5 dB 725 725 725 725 725 mA [1] Specifications and data reflect HMC453ST89 measured using the respective application circuits for each designated frequency band found herein. Contact the HMC Applications Group for assistance in optimizing performance for your application. [2] Two-tone input power of 0 dBm per tone, 1 MHz spacing. 9 - 168 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Gain vs. Temperature @ 400 MHz 25 23 20 22 15 21 20 S21 S11 S22 5 0 -5 19 18 17 -10 15 -15 14 -20 13 -25 0.1 0.2 0.3 0.4 0.5 0.6 12 0.35 0.7 0.37 FREQUENCY (GHz) 0.45 0.43 0.45 -5 RETURN LOSS (dB) RETURN LOSS (dB) 0.43 0 -5 +25 C +85 C -40 C -10 -15 -20 -10 -15 -20 +25 C +85 C -40 C -25 0.37 0.39 0.41 0.43 -30 0.35 0.45 0.37 FREQUENCY (GHz) 33 32 32 31 31 Psat (dBm) 34 33 30 +25 C +85 C 28 -40 C 27 30 29 26 25 0.41 FREQUENCY (GHz) -40 C 27 25 0.39 +25 C +85 C 28 26 0.37 0.41 Psat vs. Temperature @ 400 MHz 34 29 0.39 FREQUENCY (GHz) P1dB vs. Temperature @ 400 MHz P1dB (dBm) 0.41 Output Return Loss vs. Temperature @ 400 MHz 0 24 0.35 0.39 FREQUENCY (GHz) Input Return Loss vs. Temperature @ 400 MHz -25 0.35 9 +25 C +85 C -40 C 16 0.43 0.45 AMPLIFIERS - LINEAR & POWER - SMT 10 GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss @ 400 24 0.35 0.37 0.39 0.41 0.43 0.45 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 169 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Output IP3 vs. Temperature @ 400 MHz 11 50 10 48 9 NOISE FIGURE (dB) 52 44 42 +25 C +85 C -40 C 40 38 36 7 6 4 3 2 1 0.37 0.39 0.41 0.43 +25 C +85 C -40 C 5 32 0 0.35 0.45 0.37 0.39 FREQUENCY (GHz) +25 C +85 C -40 C -20 -25 -30 0.35 0.37 0.39 0.41 0.43 0.45 GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) ISOLATION (dB) -5 -15 0.43 0.45 Gain, Power & IP3 vs. Supply Voltage @ 400 MHz 0 -10 0.41 FREQUENCY (GHz) Reverse Isolation vs. Temperature @ 400 MHz 55 50 45 Gain P1dB Psat OIP3 40 35 30 25 20 15 10 4.5 4.75 5 5.25 5.5 Vs (Vdc) FREQUENCY (GHz) ACPR vs. Supply Voltage @ 400 MHz W-CDMA, 64 DPCH Power Compression @ 400 MHz 45 -10 -15 40 Pout Gain PAE 35 -20 W-CDMA Frequency: 400 MHz Integration BW: 3.84 MHz 64 DPCH -25 ACPR (dBc) 30 25 20 15 -30 -35 -40 4.5V -45 5V 5.5V -50 -55 10 -60 5 -65 0 -70 0 2 4 6 8 10 INPUT POWER (dBm) 9 - 170 8 34 30 0.35 Pout (dBm), Gain (dB), PAE (%) AMPLIFIERS - LINEAR & POWER - SMT OIP3 (dBm) 46 9 Noise Figure vs. Temperature @ 400 MHz 12 14 16 Source ACPR 8 10 12 14 16 18 20 22 24 26 28 Channel Power (dBm) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 470 MHz Gain vs. Temperature @ 470 MHz 23 25 22 20 21 20 S21 S11 S22 5 0 19 18 17 +25 C +85 C -40 C 15 14 -10 -15 0.1 13 0.2 0.3 0.4 0.5 0.6 12 0.43 0.7 0.45 FREQUENCY (GHz) +25 C +85 C -40 C -5 RETURN LOSS (dB) RETURN LOSS (dB) 0.51 0.53 0.51 0.53 0 -10 -15 0.45 0.47 0.49 0.51 -10 -15 -20 0.43 0.53 +25 C +85 C -40 C -5 0.45 FREQUENCY (GHz) 33 32 32 31 31 Psat (dBm) 34 33 30 +25 C +85 C 28 -40 C 27 30 29 26 25 0.49 FREQUENCY (GHz) -40 C 27 25 0.47 +25 C +85 C 28 26 0.45 0.49 Psat vs. Temperature @ 470 MHz 34 29 0.47 FREQUENCY (GHz) P1dB vs. Temperature @ 470 MHz P1dB (dBm) 0.49 Output Return Loss vs. Temperature @ 470 MHz 0 24 0.43 0.47 FREQUENCY (GHz) Input Return Loss vs. Temperature @ 470 MHz -20 0.43 9 16 -5 0.51 0.53 AMPLIFIERS - LINEAR & POWER - SMT 10 GAIN (dB) RESPONSE (dB) 15 24 0.43 0.45 0.47 0.49 0.51 0.53 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 171 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Output IP3 vs. Temperature @ 470 MHz 11 50 10 48 9 NOISE FIGURE (dB) 52 44 42 +25 C +85 C -40 C 40 38 36 7 6 4 3 2 1 0.45 0.47 0.49 0.51 +25 C +85 C -40 C 5 32 0 0.43 0.53 0.45 0.47 FREQUENCY (GHz) +25 C +85 C -40 C -20 -25 -30 0.43 0.45 0.47 0.49 0.51 0.53 GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) ISOLATION (dB) -5 -15 0.51 0.53 Gain, Power & IP3 vs. Supply Voltage @ 470 MHz 0 -10 0.49 FREQUENCY (GHz) Reverse Isolation vs. Temperature @ 470 MHz 50 45 Gain P1dB Psat OIP3 40 35 30 25 20 15 10 4.5 4.75 5 5.25 5.5 Vs (Vdc) FREQUENCY (GHz) ACPR vs. Supply Voltage @ 470 MHz W-CDMA, 64 DPCH Power Compression @ 470 MHz 50 -10 45 -15 -20 40 Pout Gain PAE W-CDMA Frequency: 470 MHz Integration BW: 3.84 MHz 64 DPCH -25 ACPR (dBc) 35 30 25 20 -30 -35 -40 4.5V 5V -45 5.5V -50 15 -55 10 -60 5 -65 0 -70 0 2 4 6 8 10 INPUT POWER (dBm) 9 - 172 8 34 30 0.43 Pout (dBm), Gain (dB), PAE (%) AMPLIFIERS - LINEAR & POWER - SMT OIP3 (dBm) 46 9 Noise Figure vs. Temperature @ 470 MHz 12 14 16 Source ACPR 8 10 12 14 16 18 20 22 24 26 28 Channel Power (dBm) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 900 MHz Gain vs. Temperature @ 900 MHz 20 18 15 17 16 15 5 S21 S11 0 S22 GAIN (dB) -5 14 13 12 +85C -40C 10 -15 -20 0.4 9 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 8 0.7 1.4 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1 1.05 1.1 1.05 1.1 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature @ 900 MHz Output Return Loss vs. Temperature @ 900 MHz 0 0 -5 +25C +85C -40C -10 RETURN LOSS (dB) RETURN LOSS (dB) 9 +25C 11 -10 -15 -20 +25C +85C -40C -5 -10 -15 -25 -30 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 -20 0.7 1.1 0.75 0.8 FREQUENCY (GHz) 34 34 33 33 32 32 31 31 30 +25C +85C 28 -40C 27 29 25 0.85 0.9 0.95 FREQUENCY (GHz) -40C 27 26 0.8 +25C +85C 28 25 0.75 0.95 30 26 24 0.7 0.9 Psat vs. Temperature @ 900 MHz Psat (dBm) P1dB (dBm) P1dB vs. Temperature @ 900 MHz 29 0.85 FREQUENCY (GHz) 1 1.05 1.1 AMPLIFIERS - LINEAR & POWER - SMT RESPONSE (dB) 10 24 0.7 0.75 0.8 0.85 0.9 0.95 1 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 173 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Output IP3 vs. Temperature @ 900 MHz Noise Figure vs. Temperature @ 900 MHz 55 10 9 8 NOISE FIGURE (dB) 9 OIP3 (dBm) 50 45 +25C +85C -40C 40 35 7 6 5 4 +25C 3 +85C -40C 2 0.8 0.85 0.9 0 0.7 1 0.75 0.8 +25C +85C -40C -15 -20 -25 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) ISOLATION (dB) -5 -30 0.7 0.9 0.95 1 1.05 1.1 Gain, Power & IP3 vs. Supply Voltage @ 900 MHz 0 -10 0.85 FREQUENCY (GHz) Reverse Isolation vs. Temperature @ 900 MHz 55 50 Gain P1dB Psat OIP3 45 40 35 30 25 20 15 10 4.5 4.75 5 5.25 5.5 Vs (Vdc) FREQUENCY (GHz) ACPR vs. Supply Voltage @ 910 MHz CDMA IS95, 9 Channels Forward Power Compression @ 900 MHz 55 -10 50 -15 -20 45 Pout 40 ACPR (dBc) PAE 35 CDMA IS95 Frequency: 910 MHz Integration BW: 1.228 MHz Forward Link, 9 Channels -25 Gain 30 25 20 -30 -35 -40 -45 4.5V -50 15 -55 10 -60 5 -65 0 -70 4 6 8 10 12 14 INPUT POWER (dBm) 9 - 174 0.95 FREQUENCY (GHz) Pout (dBm), Gain (dB), PAE (%) AMPLIFIERS - LINEAR & POWER - SMT 1 30 0.75 16 18 20 5V 5.5V Source ACPR 8 10 12 14 16 18 20 22 24 26 Channel Power (dBm) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 1900 MHz Gain vs. Temperature @ 1900 MHz 15 12 11 10 10 9 8 0 GAIN (dB) -5 -10 7 6 +25 C +85 C -40 C 4 -15 3 S21 S11 S22 -20 2 1 -25 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 0 1.7 3 1.8 FREQUENCY (GHz) +25 C +85 C -40 C 2 2.1 +25 C +85 C -40 C -5 RETURN LOSS (dB) RETURN LOSS (dB) 2.1 0 -5 -10 -15 -10 -15 -20 -20 1.8 1.9 2 -25 1.7 2.1 1.8 P1dB vs. Temperature @ 1900 MHz Psat vs. Temperature @ 1900 MHz 36 35 35 34 34 33 33 32 32 Psat (dBm) 36 31 30 29 28 +25 C +85 C -40 C 27 26 1.9 FREQUENCY (GHz) FREQUENCY (GHz) P1dB (dBm) 2 Output Return Loss vs. Temperature @ 1900 MHz 0 31 30 29 28 +25 C +85 C 27 -40 C 26 25 24 1.7 1.9 FREQUENCY (GHz) Input Return Loss vs. Temperature @ 1900 MHz -25 1.7 9 5 AMPLIFIERS - LINEAR & POWER - SMT RESPONSE (dB) 5 25 1.8 1.9 FREQUENCY (GHz) 2 2.1 24 1.7 1.8 1.9 2 2.1 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 175 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Output IP3 vs. Temperature @ 1900 MHz 10 50 9 48 8 NOISE FIGURE (dB) 52 OIP3 (dBm) 46 44 42 40 38 +25 C +85 C -40 C 36 6 5 4 +25 C +85 C -40 C 3 1 30 1.7 1.8 1.9 2 0 1.7 2.1 1.8 Reverse Isolation vs. Temperature @ 1900 MHz ISOLATION (dB) -5 +25 C +85 C -40 C -15 -20 1.7 1.8 1.9 2 2.1 Gain, Power & IP3 vs. Supply Voltage @ 1900 MHz 0 -10 1.9 FREQUENCY (GHz) FREQUENCY (GHz) 2 2.1 55 50 45 40 35 30 25 Gain P1dB Psat OIP3 20 15 10 5 4.5 4.75 5 5.25 5.5 Vs (Vdc) FREQUENCY (GHz) ACPR vs. Supply Voltage @ 1960 MHz CDMA 2000, 9 Channels Forward Power Compression @ 1900 MHz 40 -30 -35 35 Pout Gain PAE 30 -40 ACPR (dBc) -45 25 20 15 -50 CDMA2000 Frequency: 1.96 GHz Integration BW: 1.228 MHz Forward Link, SR1, 9 Channels 4.5V 5V 5.5V -55 -60 -65 10 -70 5 -75 0 10 12 14 16 18 20 22 INPUT POWER (dBm) 9 - 176 7 2 32 Pout (dBm), Gain (dB), PAE (%) AMPLIFIERS - LINEAR & POWER - SMT 34 GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 9 Noise Figure vs. Temperature @ 1900 MHz 24 26 28 -80 14 16 18 20 22 24 26 28 OUTPUT CHANNEL POWER (dBm) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 2100 MHz Gain vs. Temperature @ 2100 MHz 10 10 9 5 7 GAIN (dB) -5 -10 6 5 4 S21 S11 S22 -20 9 +25 C +85 C -40 C 3 -15 2 1 -25 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 0 1.9 3 2 FREQUENCY (GHz) 2.1 2.2 2.3 2.2 2.3 FREQUENCY (GHz) Input Return Loss vs. Temperature @ 2100 MHz Output Return Loss vs. Temperature @ 2100 MHz 0 0 RETURN LOSS (dB) RETURN LOSS (dB) -5 +25 C +85 C -40 C -5 -10 -15 +25 C +85 C -40 C -10 -15 -20 -25 -20 1.9 2 2.1 2.2 -30 1.9 2.3 2 FREQUENCY (GHz) Psat vs. Temperature @ 2100 MHz 35 35 34 34 33 33 32 32 Psat (dBm) P1dB (dBm) P1dB vs. Temperature @ 2100 MHz 31 30 29 28 30 29 +25 C +85 C -40 C 27 26 25 1.9 31 28 +25 C +85 C -40 C 27 2.1 FREQUENCY (GHz) AMPLIFIERS - LINEAR & POWER - SMT RESPONSE (dB) 8 0 26 2 2.1 FREQUENCY (GHz) 2.2 2.3 25 1.9 2 2.1 2.2 2.3 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 177 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Output IP3 vs. Temperature @ 2100 MHz 10 50 9 48 8 NOISE FIGURE (dB) 52 44 42 +25 C +85 C -40 C 40 38 36 7 6 5 4 2 32 1 2 2.1 2.2 +25 C +85 C -40 C 3 34 30 1.9 0 1.9 2.3 2 2.1 ISOLATION (dB) -5 +25 C +85 C -40 C -15 2 2.1 2.2 2.3 GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 0 -20 1.9 2.3 Gain, Power & IP3 vs. Supply Voltage @ 2100 MHz Reverse Isolation vs. Temperature @ 2100 MHz -10 2.2 FREQUENCY (GHz) FREQUENCY (GHz) 55 50 45 40 35 30 25 Gain P1dB Psat OIP3 20 15 10 5 4.5 4.75 5 5.25 5.5 Vs (Vdc) FREQUENCY (GHz) ACPR vs. Supply Voltage @ 2140 MHz W-CDMA, 64 DPCH Power Compressions @ 2100 MHz 45 -20 40 -25 Pout Gain PAE 35 4.5V W-CDMA Frequency: 2.14 GHz Integration BW: 3.84 MHz 64 DPCH -30 30 ACPR (dBc) Pout (dBm), Gain (dB), PAE (%) AMPLIFIERS - LINEAR & POWER - SMT OIP3 (dBm) 46 9 Noise Figure vs. Temperature @ 2100 MHz 25 20 -35 5V -40 5.5V -45 15 -50 10 -55 5 -60 0 -65 Source ACPR 10 12 14 16 18 20 22 INPUT POWER (dBm) 9 - 178 24 26 28 12 14 16 18 20 22 24 26 28 OUTPUT CHANNEL POWER (dBm) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Power Dissipation Absolute Maximum Ratings Max Pdiss @ +85 C 4 3.5 3 2100 MHz 2.5 2 1900 MHz 1.5 Collector Bias Voltage (Vcc) +6.0 Vdc RF Input Power (RFIN)(Vs +5Vdc) +32 dBm Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 58.5 mW/°C above 85 °C) 3.8 W Thermal Resistance (junction to ground paddle) 17.1 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C 1 0 5 10 15 20 25 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS INPUT POWER (dBm) Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 9 AMPLIFIERS - LINEAR & POWER - SMT POWER DISSIPATION (W) 4.5 Package Information Part Number Package Body Material Lead Finish MSL Rating HMC453ST89 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC453ST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H453 XXXX [2] H453 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 179 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Pin Descriptions AMPLIFIERS - LINEAR & POWER - SMT 9 Pin Number Function Description 1 RFIN This pin is DC coupled. Off chip matching components are required. See Application Circuit herein. 3 RFOUT RF output and DC Bias input for the amplifier. Off chip matching components are required. See Application Circuit herein. 2, 4 GND These pins & package bottom must be connected to RF/DC ground. 400 MHz Application Circuit This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. TL1 TL2 TL3 TL4 TL5 TL6 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm C1, C4 10 pF Physical Length 0.16” 0.04” 0.06” 0.21” 0.04” 0.10” C2, C3 8.2 pF Electrical Length 4° 1° 1° 5° 1° 2° C5 39 pF C6 100 pF Impedance PCB Material: 10 mil Rogers 4350, Er = 3.48 9 - 180 Interface Schematic Recommended Component Values C7 12 pF C8 2.2 μF L1 47 nH L2 40 nH L3 4.3 nH L4 5.1 nH R1 5.1 Ohm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 400 MHz Evaluation PCB List of Materials for Evaluation PCB 110957-400 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 2 mm DC Header C1, C4 10 pF Capacitor, 0402 Pkg. C2, C3 8.2 pF Capacitor, 0402 Pkg. C5 39 pF Capacitor, 0402 Pkg. C6 100 pF Capacitor, 0402 Pkg. C7 12 pF Capacitor, 0402 Pkg. C8 2.2 μF Capacitor, Tantalum L1 47 nH Inductor, 0603 Pkg. L2 40 nH Inductor, 0402 Pkg. L3 4.3 nH Inductor, 0402 Pkg. L4 5.1 nH Inductor, 0402 Pkg. R1 5.1 Ohm Resistor, 0402 Pkg. U1 HMC453ST89 / HMC453ST89E Linear Amp PCB [2] 110955 Evaluation PCB, 10 mils The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - LINEAR & POWER - SMT 9 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 181 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 470 MHz Application Circuit This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. AMPLIFIERS - LINEAR & POWER - SMT 9 9 - 182 TL1 TL2 TL3 TL4 TL5 TL6 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm C1 10 pF Physical Length 0.16” 0.04” 0.06” 0.21” 0.04” 0.10” C2, C3 6.8 pF Electrical Length 4° 1° 2° 6° 1° 3° C4 12 pF C5 39 pF C6 100 pF C7 5.6 pF C8 2.2 μF L1 47 nH Impedance PCB Material: 10 mil Rogers 4350, Er = 3.48 Recommended Component Values L2 40 nH L3 4.7 nH L4 2.4 nH R1 5.1 Ohm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 470 MHz Evaluation PCB List of Materials for Evaluation PCB 110961-470 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 2 mm DC Header C1 10 pF Capacitor, 0402 Pkg. C2, C3 6.8 pF Capacitor, 0402 Pkg. C4 12 pF Capacitor, 0402 Pkg. C5 39 pF Capacitor, 0402 Pkg. C6 100 pF Capacitor, 0402 Pkg. C7 5.6 pF Capacitor, 0402 Pkg. C8 2.2 μF Capacitor, Tantalum L1 47 nH Inductor, 0603 Pkg. L2 40 nH Inductor, 0402 Pkg. L3 4.7 nH Inductor, 0402 Pkg. L4 2.4 nH Inductor, 0402 Pkg. R1 5.1 Ohm Resistor, 0402 Pkg. U1 HMC453ST89 / HMC453ST89E Linear Amp PCB [2] 110955 Evaluation PCB, 10 mils The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - LINEAR & POWER - SMT 9 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 183 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 900 MHz Application Circuit This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. AMPLIFIERS - LINEAR & POWER - SMT 9 9 - 184 TL1 TL2 TL3 50 Ohm 50 Ohm 50 Ohm C1 5 pF Physical Length 0.25” 0.08” 0.31” C2 3.3 pF Electrical Length 13° 4° 16° C3 2.7 pF C4 8.2 pF Impedance PCB Material: 10 mil Rogers 4350, Er = 3.48 Recommended Component Values C5 12 pF C6 100 pF C7 2.2 μF L1 15 nH R1 5.1 Ohm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 900 MHz Evaluation PCB List of Materials for Evaluation PCB 110387-900 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 2 mm DC Header C1 5 pF Capacitor, 0402 Pkg. C2 3.3 pF Capacitor, 0402 Pkg. C3 2.7 pF Capacitor, 0402 Pkg. C4 8.2 pF Capacitor, 0402 Pkg. C5 12 pF Capacitor, 0402 Pkg. C6 100 pF Capacitor, 0402 Pkg. C7 2.2 μF Capacitor, Tantalum L1 15 nH Inductor, 0603 Pkg. R1 5.1 Ohm Resistor, 0402 Pkg. U1 HMC453ST89 / HMC453ST89E Linear Amp PCB [2] 110385 Evaluation PCB, 10 mils The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - LINEAR & POWER - SMT 9 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 185 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 1900 MHz Application Circuit This circuit was used to specify the performance for 1710-1990 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. AMPLIFIERS - LINEAR & POWER - SMT 9 9 - 186 TL1 TL2 50 Ohm 50 Ohm C1 Physical Length 0.04” 0.07” C2 1.5 pF Electrical Length 4° 8° C3 3.9 pF C4 15 pF C5 100 pF C6 2.2 μF L1 20 nH L2 12 nH R1 5.1 Ohm Impedance PCB Material: 10 mil Rogers 4350, Er = 3.48 Recommended Component Values 1.2 pF For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 1900 MHz Evaluation PCB List of Materials for Evaluation PCB 108718-1900 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 2 mm DC Header C1 1.2 pF Capacitor, 0402 Pkg. C2 1.5 pF Capacitor, 0402 Pkg. C3 3.9 pF Capacitor, 0402 Pkg. C4 15 pF Capacitor, 0402 Pkg. C5 100 pF Capacitor, 0402 Pkg. C6 2.2 μF Capacitor, Tantalum L1 20 nH Inductor, 0402 Pkg. L2 12 nH Inductor, 0402 Pkg. R1 5.1 Ohm Resistor, 0402 Pkg. U1 HMC453ST89 / HMC453ST89E Linear Amp PCB [2] 108716 Evaluation PCB, 10 mils The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - LINEAR & POWER - SMT 9 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 187 HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 2100 MHz Application Circuit This circuit was used to specify the performance for 2010-2170 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. AMPLIFIERS - LINEAR & POWER - SMT 9 9 - 188 Note: C2 and C3 should be placed as close to pins as possible. Recommended Component Values TL1 TL2 TL3 50 Ohm 50 Ohm 50 Ohm C1 Physical Length 0.04” 0.04” 0.04” C2 1 pF Electrical Length 5° 5° 5° C3 3.3 pF C4 15 pF C5 100 pF Impedance PCB Material: 10 mil Rogers 4350, Er = 3.48 0.8 pF C6 0.5 pF C7 2.2 μF L1 20 nH L2 12 nH R1 5.1 Ohm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC453ST89 / 453ST89E v02.0710 InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 2100 MHz Evaluation PCB List of Materials for Evaluation PCB 109942-2100 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 2 mm DC Header C1 0.8 pF Capacitor, 0402 Pkg. C2 1 pF Capacitor, 0402 Pkg. C3 3.3 pF Capacitor, 0402 Pkg. C4 15 pF Capacitor, 0402 Pkg. C5 100 pF Capacitor, 0402 Pkg. C6 0.5 pF Capacitor, 0402 Pkg. C7 2.2 μF Capacitor, Tantalum L1 20 nH Inductor, 0402 Pkg. L2 12 nH Inductor, 0402 Pkg. R1 5.1 Ohm Resistor, 0402 Pkg. U1 HMC453ST89 / HMC453ST89E Linear Amp PCB [2] 109940 Evaluation PCB, 10 mils The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - LINEAR & POWER - SMT 9 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 9 - 189