Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Typical Applications Features The HMC187AMS8(E) is ideal for: Conversion Loss: 15 dB • Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 40 dB • LMDS, VSAT, and Point-to-Point Radios Input Drive Level: 10 to 20 dBm • UNII & HiperLAN Freq. Multipliers - PASSIVE - SMT 5 • Test Equipment Functional Diagram General Description The HMC187AMS8(E) is a miniature frequency doubler MMIC in plastic 8-lead MSOP package. The suppression of undesired fundamental and higher order harmonics is 40 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers. The doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. The passive Schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal. * Electrical Specifications, TA = +25° C, As a Function of Drive Level Input = +10 dBm Parameter Frequency Range, Input Frequency Range, Output Conversion Loss Min. Typ. Input = +15 dBm Max. Min. Typ. Input = +20 dBm Max. Min. Typ. Max. Units 1.25 - 1.75 1.0 - 1.75 0.85 - 2.0 GHz 2.5 - 3.5 2.0 - 3.5 1.7 - 4.0 GHz 18 22 14 17 15 18 dB FO Isolation (with respect to input level) 35 45 dB 3FO Isolation (with respect to input level) 42 46 dB 4FO Isolation (with respect to input level) 30 40 dB * N/C denotes no internal connection, however, it is recommended to connect these pins to ground. 5-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Isolation @ +15 dBm Drive Level* 0 0 -5 -15 -10 ISOLATION (dB) -15 -20 -25 +85 C +25 C -40 C -30 1F0 3F0 4F0 -30 -45 5 -60 -75 -35 -90 1 2 3 4 5 6 0 2 4 OUTPUT FREQUENCY (GHz) 6 8 10 12 FREQUENCY (GHz) *With respect to input level Output Return Loss for Several Input Frequencies Input Return Loss vs. Drive Level 0 0 -5 RETURN LOSS (dB) RETURN LOSS (dB) -5 -10 -15 -20 17 dBm 15 dBm 13 dBm 10 dBm -25 -30 0.5 -10 -15 2.50 GHz 1.75 GHz 1.00 GHz -20 -25 1 1.5 2 INPUT FREQUENCY (GHz) 2.5 3 0 2 4 6 8 10 OUTPUT FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Freq. Multipliers - PASSIVE - SMT CONVERSION GAIN (dB) Conversion Gain @ +15 dBm Drive Level 5-2 HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Conversion Gain @ 25°C vs. Drive Level Output Return Loss with 1 GHz Input 0 0 20 dBm 17 dBm 15 dBm 13 dBm 11 dBm 9 dBm RETURN LOSS (dB) 5 CONVERSION GAIN (dB) -5 -10 -15 -20 -25 -5 -10 -15 17 dBm 15 dBm 10 dBm -20 -35 1 2 3 4 5 0 6 1 Conversion Gain @ -40 °C vs. Drive Level 3 5 6 0 20 dBm 17 dBm 15 dBm RETURN LOSS (dB) -5 13 dBm 11 dBm 9 dBm -10 -15 -20 -25 -5 -10 17 dBm 15 dBm 10 dBm -15 -30 -35 -20 1 2 3 4 5 6 0 1 OUTPUT FREQUENCY (GHz) 2 3 4 5 6 OUTPUT FREQUENCY (GHz) Conversion Gain @ +85°C vs. Drive Level Output Return Loss with 2.5 GHz Input 0 0 20 dBm 17 dBm 15 dBm 13 dBm 11 dBm 9 dBm RETURN LOSS (dB) -5 -10 -15 -20 -25 -5 -10 17 dBm 15 dBm 10 dBm -15 -30 -20 -35 1 2 3 4 OUTPUT FREQUENCY (GHz) 5-3 4 Output Return Loss with 1.75 GHz Input 0 CONVERSION GAIN (dB) 2 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) CONVERSION GAIN (dB) Freq. Multipliers - PASSIVE - SMT -30 5 6 0 1 2 3 4 5 6 OUTPUT FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Absolute Maximum Ratings +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C 5 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1.LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. Freq. Multipliers - PASSIVE - SMT Input Drive 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC187AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC187AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H187A XXXX H187A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 5-4 HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Pin Description Freq. Multipliers - PASSIVE - SMT 5 5-5 Pin Number Function Description 1, 4, 5, 8 N/C These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 3, 6 GND All ground leads must be soldered to PCB RF/DC ground. 2 RFIN Pin is DC coupled and matched to 50 Ohms. 7 RFOUT Pin is DC coupled and matched to 50 Ohms. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC187AMS8 / 187AMS8E v00.0410 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.85 - 2.0 GHz INPUT Evaluation PCB List of Materials for Evaluation PCB 103313 Item Description J1, J2 PCB Mount SMA Connector U1 HMC187AMS8(E) Doubler PCB [2] 103311 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package N/C and ground leads should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Freq. Multipliers - PASSIVE - SMT 5 5-6