Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC204C8 v04.1105 FREQ. MULTIPLIERS - PASSIVE - SMT 7 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Typical Applications Features The HMC204C8 is suitable for: Conversion Loss: 16 dB • Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 40 dB • LMDS, VSAT, and Point-to-Point Radios Passive: No Bias Required • Test Equipment Functional Diagram General Description The HMC204C8 is a passive miniature frequency doubler in a non-hermetic surface mount package. Suppression of undesired fundamental and higher order harmonics is 40 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It features small size, no DC bias, and no measurable additive phase noise onto the multiplied signal. Electrical Specifi cations, TA = +25° C, As a Function of Drive Level Input = +10 dBm Parameter Frequency Range, Input Frequency Range, Output Conversion Loss 7 - 24 Min. Typ. Input = +13 dBm Max. Min. Typ. Input = +15 dBm Max. Min. Typ. 5.5 - 7.5 5.0 - 8.0 4.0 - 8.0 11.0 - 15.0 10.0 - 16.0 8.0 - 16.0 16 19 16 19 16 Max. Units GHz GHz 19 dB FO Isolation (with respect to input level) 37 41 dB 3FO Isolation (with respect to input level) 42 46 dB 4FO Isolation (with respect to input level) 35 40 dB For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC204C8 v04.1105 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Conversion Gain vs. Temperature @ +15 dBm Drive Level Isolation @ +15 dBm Drive Level* -20 -20 -40 C +25 C +85 C -30 -40 -60 FO 3FO 4FO -80 -100 -40 3 4 5 6 7 8 0 9 5 10 15 20 25 30 35 40 FREQUENCY (GHz) INPUT FREQUENCY (GHz) *With respect to input level Output Return Loss for Several Input Frequencies 0 0 -5 -5 RETURN LOSS (dB) RETURN LOSS (dB) Input Return Loss vs. Drive Level -10 +8 dBm +10 dBm +12 dBm +14 dBm -15 -20 -10 4 GHz In 6 GHz In 8 GHz In -15 -20 3 4 5 6 7 FREQUENCY (GHz) 8 9 8 10 12 14 OUTPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 16 FREQ. MULTIPLIERS - PASSIVE - SMT -10 ISOLATION (dB) CONVERSION GAIN (dB) 7 0 0 7 - 25 HMC204C8 v04.1105 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Conversion Gain @ 25 °C vs. Drive Level 0 -10 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 0 -20 +8 dBm +10 dBm +12 dBm +15 dBm -30 -40 4 5 6 7 8 +8 dBm +10 dBm +12 dBm -15 9 8 INPUT FREQUENCY (GHz) Conversion Gain @ -40 °C vs. Drive Level -10 -5 RETURN LOSS (dB) 0 -20 +8 dBm +10 dBm +12 dBm +15 dB, -40 14 16 -10 +8 dBm +10 dBm +12 dBm -15 -20 3 4 5 6 7 8 9 8 12 14 16 Output Return Loss with 8 GHz Input 0 -10 -5 RETURN LOSS (dB) 0 -20 +8 dBm +10 dBm +12 dBm +15 dBm -30 10 OUTPUT FREQUENCY (GHz) INPUT FREQUENCY (GHz) CONVERSION GAIN (dB) 12 Output Return Loss with 6 GHz Input 0 -30 10 OUTPUT FREQUENCY (GHz) Conversion Gain @ +85 °C vs. Drive Level -40 -10 +8 dBm +10 dBm +12 dBm -15 -20 3 4 5 6 7 INPUT FREQUENCY (GHz) 7 - 26 -10 -20 3 CONVERSION GAIN (dB) FREQ. MULTIPLIERS - PASSIVE - SMT 7 Output Return Loss with 4 GHz Input 8 9 8 10 12 14 OUTPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 16 HMC204C8 v04.1105 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Absolute Maximum Ratings +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C 7 FREQ. MULTIPLIERS - PASSIVE - SMT Input Drive ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. LEAD, PACKAGE BOTTOM MATERIAL: COPPER 3. PLATING: ELECTROLYTIC GOLD 100 - 200 MICROINCHES OVER ELECTROLYTIC NICKEL 100 TO 200 MICROINCHES. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE LID SEAL PROTRUSION .005 PER SIDE. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB PF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 27 HMC204C8 v04.1105 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Evaluation PCB FREQ. MULTIPLIERS - PASSIVE - SMT 7 List of Materials for Evaluation PCB 107196 [1] Item Description J1, J2 PCB Mount SMA Connector U1 HMC204C8, Doubler PCB [2] 107165 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 7 - 28 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC204C8 v04.1105 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Notes: FREQ. MULTIPLIERS - PASSIVE - SMT 7 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 29