HMC158C8 Data Sheet PDF

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC158C8
v03.1105
FREQ. MULTIPLIERS - PASSIVE - SMT
7
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 1.3 - 4.0 GHz INPUT
Typical Applications
Features
The HMC158C8 is suitable for:
Conversion Loss: 15 dB
• Wireless Local Loop
Fo, 3Fo, 4Fo Isolation: 40 dB
• LMDS, VSAT, and Point-to-Point Radios
Input Drive Level: 10 to 20 dBm
• UNII & HiperLAN
• Test Equipment
Functional Diagram
General Description
The HMC158C8 is a miniature frequency doubler
MMIC in a non-hermetic ceramic surface mount nonhermetic package. Suppression of undesired fundamental and higher order harmonics is 40 dB typical
with respect to input signal level. The doubler uses
the same diode/balun technology used in Hittite MMIC
mixers, features small size and requires no DC bias.
Electrical Specifi cations, TA = +25° C, As a Function of Drive Level
Input = +10 dBm
Parameter
Typ.
Input = +15 dBm
Max.
Min.
Typ.
Input = +20 dBm
Max.
Min.
Typ.
Frequency Range, Input
1.7 - 4.0
1.7 - 3.5
1.3 - 4.0
Frequency Range, Output
3.4 - 8.0
3.4 - 7.0
2.6 - 8.0
Conversion Loss
7-6
Min.
18
22
15
18
15
Max.
Units
GHz
GHz
18
dB
FO Isolation
(with respect to input level)
37
45
dB
3FO Isolation
(with respect to input level)
40
50
dB
4FO Isolation
(with respect to input level)
32
40
dB
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC158C8
v03.1105
Conversion Gain vs. Drive Level
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 1.3 - 4.0 GHz INPUT
Isolation @ +15 dBm Drive Level*
*With respect to input level
Input Return Loss vs. Drive Level
Output Return Loss vs. Drive Level
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
FREQ. MULTIPLIERS - PASSIVE - SMT
CONVERSION GAIN (dB)
7
7-7
HMC158C8
v03.1105
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 1.3 - 4.0 GHz INPUT
Absolute Maximum Ratings
FREQ. MULTIPLIERS - PASSIVE - SMT
7
Input Drive
+27 dBm
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92%
2. LEAD, PACKAGE BOTTOM MATERIAL: COPPER
3. PLATING: ELECTROLYTIC GOLD 100 - 200 MICROINCHES OVER
ELECTROLYTIC NICKEL 100 TO 200 MICROINCHES.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE
LID SEAL PROTRUSION .005 PER SIDE.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB PF GROUND.
7-8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC158C8
v03.1105
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 1.3 - 4.0 GHz INPUT
Evaluation PCB
FREQ. MULTIPLIERS - PASSIVE - SMT
7
List of Materials for Evaluation PCB 107196 [1]
Item
Description
J1, J2
PCB Mount SMA Connector
U1
HMC158C8, Doubler
PCB [2]
107165 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed
paddle should be connected directly to the ground
plane similar to that shown. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7-9