Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC561LP3 / 561LP3E SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Typical Applications Features 7 The HMC561LP3E are suitable for: High Output Power: +14 dBm • Clock Generation Applications: SONET OC-192 & SDH STM-64 Low Input Power Drive: 0 to +6 dBm FREQ. MULTIPLIERS - ACTIVE - SMT v01.0407 • Point-to-Point & VSAT Radios Fo Isolation: 15 dBc @ Fout= 16 GHz 100 KHz SSB Phase Noise: -139 dBc/Hz • Test Instrumentation RoHS Compliant 3x3 mm SMT Package • Military & Space Functional Diagram General Description The HMC561LP3(E) is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a +5 dBm signal, the multiplier provides +14 dBm typical output power from 8 to 21 GHz and the Fo and 3Fo isolations are 15 dBc at 16 GHz. The HMC561LP3(E) is ideal for use in LO multiplier chains for Pt to Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -139 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The RoHS packaged HMC561LP3(E) eliminates the need for wire bonding, and allows the use of surface mount manufacturing techniques. For availability on NonRoHS compliant HMC561LP3 product please contact Hittite Microwave sales directly. Electrical Specifi cations, TA = +25°C, Vdd = +5V, 5 dBm Drive Level Parameter Min. Frequency Range, Input Typ. Max. 4 - 10.5 Frequency Range, Output GHz 8 - 21 GHz 14 dBm 15 dBc 3Fo Isolation (with respect to output level) 15 dBc 4Fo Isolation (with respect to output level) 20 dBc Input Return Loss 16 dB Output Return Loss 8 dB -139 dBc/Hz 98 mA Output Power 11 Fo Isolation (with respect to output level) SSB Phase Noise (100 kHz Offset) Supply Current (Idd) (Vdd = 5V, Vgg = -1.7V Typ.) *Adjust Vgg between -2.0 and -1.2V to achieve Idd = 98 mA 7 - 82 Units For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC561LP3 / 561LP3E SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Output Power vs. Temperature @ 5 dBm Drive Level Output Power vs. Drive Level 7 20 16 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 20 12 8 +25 C +85 C -40 C 4 15 10 5 0 -2 dBm 0 dBm 2 dBm 4 dBm 6 dBm -5 0 -10 7 9 11 13 15 17 19 21 23 7 9 11 FREQUENCY (GHz) 13 15 17 19 21 23 21 23 FREQUENCY (GHz) Output Power vs. Supply Voltage @ 5 dBm Drive Level Isolation @ 5 dBm Drive Level 20 20 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 15 16 12 4.5 V 5.0 V 5.5 V 8 4 10 5 0 -5 -10 -15 -20 Fo 2 Fo 3 Fo 4 Fo -25 -30 0 -35 7 9 11 13 15 17 19 21 23 7 9 11 FREQUENCY (GHz) 15 17 19 SSB Phase Noise Performance, Fout= 16 GHz, Input Power = +3 dBm Output Power vs. Input Power 0 20 SSB PHASE NOISE (dBc/Hz) 15 OUTPUT POWER (dBm) 13 FREQUENCY (GHz) FREQ. MULTIPLIERS - ACTIVE - SMT v01.0407 10 5 0 8 GHz 14 GHz 20 GHz -5 -10 -15 -20 -5 -2 1 4 INPUT POWER (dBm) 7 10 -30 -60 -90 -120 -150 -180 2 10 3 10 4 10 5 10 6 10 7 10 OFFSET FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 83 HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Output Return Loss vs. Temperature Input Return Loss vs. Temperature 7 0 0 -5 +25 C +85 C -40 C RETURN LOSS (dB) RETURN LOSS (dB) -15 -20 -25 25 C +85 C -40 C -30 -12 -16 -40 -20 3 4 5 6 7 8 9 10 11 7 12 9 11 13 FREQUENCY (GHz) 15 17 19 21 23 FREQUENCY (GHz) Supply Current vs. Input Power 130 120 110 100 90 80 70 -10 -6 -2 2 6 10 INPUT POWER (dBm) Absolute Maximum Ratings 7 - 84 -8 -35 Idd (mA) FREQ. MULTIPLIERS - ACTIVE - SMT -4 -10 Typical Supply Current vs. Vdd RF Input (Vdd = +5V) +10 dBm Vdd (Vdc) Idd (mA) Supply Voltage (Vdd) +5.5 Vdc 4.5 97 Channel Temperature 150 °C Continuous Pdiss (T= 85 °C) (derate 9.8 mW/°C above 85 °C) 635 mW Thermal Resistance (channel to ground paddle) 102 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C 5.0 98 5.5 99 Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. FREQ. MULTIPLIERS - ACTIVE - SMT 7 Package Information Part Number Package Body Material Lead Finish MSL Rating HMC561LP3 Low Stress Injection Molded Plastic [4] Sn/Pb Solder MSL1 HMC561LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] 561 XXXX [2] 561 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX [4] For availability on Non-RoHS HMC561LP3 products please contact Hittite Microwave sales directly. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 85 HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Pin Description FREQ. MULTIPLIERS - ACTIVE - SMT 7 7 - 86 Pin Number Function Description 1, 3, 10, 12 GND Package bottom must also be connected to RF/DC ground. 2 RFIN Pin is AC coupled and matched to 50 Ohms. 4 - 9, 14, 16 N/C These pins are internally not connected; however, this product was specified with these pins connected to RF/ DC ground. 11 RFOUT Pin is AC coupled and matched to 50 Ohms. 13 Vdd Supply voltage 5V ± 0.5V. External bypass capacitors of 100 pF, 1,000 pF and 2.2 μF are required. 15 Vgg Gate control for multiplier. Adjust to achieve Idd of 98 mA. Please follow “MMIC Amplifier Biasing Procedure” Application note. Interface Schematic Application Circuit Component Value C1, C2 100 pF C3, C4 1,000 pF C5, C6 2.2 μF For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC561LP3 / 561LP3E v01.0407 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 21 GHz OUTPUT Evaluation PCB FREQ. MULTIPLIERS - ACTIVE - SMT 7 List of Materials for Evaluation PCB 115556 [1] Item Description J1, J2 PCB Mount SRI K Connector J3 - J5 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 1,000 pF Capacitor, 0603 Pkg. C5, C6 2.2 μF Tantalum Capacitor U1 HMC561LP3E x2 Active Multiplier PCB [2] 115555 Eval Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 87