Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC573LC3B v03.0514 FREQ. MULTIPLIERS - ACTIVE - SMT SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Typical Applications Features The HMC573LC3B is suitable for: High Output Power: +12 dBm • Clock Generation Applications: SONET OC-192 & SDH STM-64 Low Input Power Drive: 0 to +6 dBm • Point-to-Point & VSAT Radios Fo Isolation: >20 dBc @ Fout= 16 GHz 100 KHz SSB Phase Noise: -134 dBc/Hz • Test Instrumentation Single Supply: +5V@ 92 mA • Military & Space RoHS Compliant 3x3 mm SMT Package Functional Diagram General Description The HMC573LC3B is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a +5 dBm signal, the multiplier provides +12 dBm typical output power from 8 to 22 GHz. The Fo and 3Fo isolations are >20 dBc and >25 dBc respectively at 16 GHz. The HMC573LC3B is ideal for use in LO multiplier chains for Pt-to-Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -134 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The RoHS packaged HMC573LC3B eliminates the need for wire bonding, and allows the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25°C, Vdd = +5V, 5 dBm Drive Level Parameter Min. Frequency Range, Input Typ. 4 - 11 Frequency Range, Output Max. Units GHz 8 - 22 GHz 12 dBm Fo Isolation (with respect to output level) 20 dBc 3Fo Isolation (with respect to output level) 25 dBc 4Fo Isolation (with respect to output level) 15 dBc Input Return Loss 10 dB Output Return Loss 10 dB -134 dBc/Hz 92 mA Output Power SSB Phase Noise (100 kHz Offset) Supply Current (Idd) (Vdd = 5V, Vgg = -1.25V Typ.) 9 *Adjust Vgg between -1.5 and ~1.1V to achieve Idd = 92 mA 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC573LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Output Power vs. Temperature @ 5 dBm Drive Level Output Power vs. Drive Level 16 12 8 +25C +85C -40C 4 15 10 5 0 -2 dBm 0 dBm 2 dBm 4 dBm 6 dBm 8 dBm -5 0 -10 7 9 11 13 15 17 19 21 23 7 9 11 13 FREQUENCY (GHz) Output Power vs. Supply Voltage @ 5 dBm Drive Level 17 19 21 23 21 23 Isolation @ 5 dBm Drive Level 20 25 16 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 15 FREQUENCY (GHz) 12 4.5V 5.0V 5.5V 8 4 2Fo 15 5 4Fo -5 -15 3Fo -25 Fo 0 -35 7 9 11 13 15 17 19 21 23 7 9 11 13 FREQUENCY (GHz) 19 Supply Current vs. Input Power 20 105 15 100 10 95 5 Idd (mA) OUTPUT POWER (dBm) 17 FREQUENCY (GHz) Output Power vs. Input Power 0 -5 8GHz 14GHz 20GHz -10 90 85 80 75 -15 -20 -10 15 FREQ. MULTIPLIERS - ACTIVE - SMT 20 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 20 -8 -6 -4 -2 0 2 INPUT POWER (dBm) 4 6 8 10 70 -10 -8 -6 -4 -2 0 2 4 6 8 10 INPUT POWER (dBm) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC573LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Output Return Loss vs. Temperature 3 0 0 -4 -4 RETURN LOSS (dB) RETURN LOSS (dB) FREQ. MULTIPLIERS - ACTIVE - SMT Input Return Loss vs. Temperature -8 -12 +25C +85C -40C -16 +25C +85C -40C -8 -12 -16 -20 -20 3 4 5 6 7 8 9 FREQUENCY (GHz) 10 11 12 7 9 11 13 15 17 19 21 23 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC573LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT Typical Supply Current vs. Vdd RF Input (Vdd = +5V) +10 dBm Vdd (Vdc) Idd (mA) Supply Voltage (Vdd) +6.0 Vdc 4.5 90 Channel Temperature 175 °C Continuous Pdiss (T= 85 °C) (derate 8.0 mW/°C above 85 °C) 719 mW Thermal Resistance (channel to ground paddle) 125 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A 5.0 92 5.5 94 Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing FREQ. MULTIPLIERS - ACTIVE - SMT Absolute Maximum Ratings NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC573LC3B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H573 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 4 HMC573LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT FREQ. MULTIPLIERS - ACTIVE - SMT Pin Description 5 Pin Number Function Description 1, 3, 7, 9 GND Package bottom must also be connected to RF/DC ground. 2 RFIN Pin is AC coupled and matched to 50 Ohms. 4 - 6, 11 N/C These pins are internally not connected; however, this product was specified with these pins connected to RF/ DC ground. 8 RFOUT Pin is AC coupled and matched to 50 Ohms. 10 Vdd Supply voltage 5V ± 0.5V. External bypass capacitors of 100 pF, 1,000 pF and 2.2 µF are required. 12 Vgg Gate control for amplifier. Adjust to achieve Idd of 92 mA. Please follow “MMIC Amplifier Biasing Procedure” Application note. Interface Schematic Application Circuit Component Value C1, C2 100 pF C3, C4 1,000 pF C5, C6 2.2 µF For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC573LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 8 - 22 GHz OUTPUT FREQ. MULTIPLIERS - ACTIVE - SMT Evaluation PCB List of Materials for Evaluation PCB 115739 [1] Item Description J1, J2 PCB Mount SRI K Connector J3 - J5 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 1,000 pF Capacitor, 0603 Pkg. C5, C6 2.2 µF Tantalum Capacitor U1 HMC573LC3B x2 Active Multiplier PCB [2] 115864 Eval Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 6