plc01 6

05071
PLC01-6
Only One Name Means ProTek’Tion™
high powered MULTI-LINE low capacitance TVS ARRAY
Description
The PLC01-6 is a high powered multi-line low capacitance transient voltage suppressor array that provides board
level protection for Bellcore 1089, standard TTL and CMOS bus line applications against the damaging effects of ESD,
tertiary lightning and switching transients.
This device has a peak pulse power rating of 1500 Watts for an 10/1000µs waveshape. The PLC01-6 meets the IEC
61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SO-16WB package
Features
applications
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs -L3(Line-Gnd),
L4(Line-Line) & L1(Power)
• 1,500 Watts Peak Pulse Power per Line (tp = 10/1000µs)
• Low Clamping Voltage
• 100A (10/1000µs) per Bellcore 1089 (Intra-Building)
• 200A (10/160µs) per FCC Part 68
• ESD Protection > 25 kilovolts
• Bidirectional Configuration
• Protects 1 Line
• RoHS Compliant
• REACH Compliant
• T1/E1 Line Cards
• Telecommunications Equipment
• xDSL, USB, SCSI & Ethernet Interfaces
• Cellular Base Stations
• Data & Bus Lines for FCC Part 68 Applications
Mechanical characteristics
• Molded JEDEC SO-16 (Wide Body) Package
• Approximate Weight: 0.5 grams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 16mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
PIN CONFIGURATION
05071.R9 9/12
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
Page 1
www.protekdevices.com
05071
PLC01-6
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
TL
-55 to 150
°C
Storage Temperature
TSTG
-55 to 150
°C
Peak Pulse Power (tp = 10/1000µs) - See Figure 1
PPP
1,500
Watts
Operating Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(Note 1)
RATED
STAND-OFF
VOLTAGE
minimum
breakdown
voltage
MAXIMUM
CLAMPING
VOLTAGE
(Note 2)
MAXIMUM
CLAMPING
VOLTAGE
(Note 3)
MAXIMUM
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
VWM
VOLTS
@1mA
V(BR)
VOLTS
@I P = 100A
VC
VOLTS
@I P = 200A
VC
VOLTS
@V WM
ID
µA
@0V, 1MHz
C
pF
6.0
8.0
15.0
16.0
25
50
PLC01-6
Notes
1. Electrical characteristics apply from pins 13-16 to 1-4 and 5-8 to 9-12 - see pin configuration.
2. VC tested at 10/1000µs impluse waveform.
3. 10/160µs impulse waveform per FCC Part 68.
figure 1
peak pulse power vs pulse time
PPP - Peak Pulse Power - kilowatts
100
10
1500W, 10/1000µs
Waveform
1
0.1
0.1
05071.R9 9/12
1
10
100
td - Pulse Duration - µs
Page 2
1,000
10,000
100,000
www.protekdevices.com
05071
PLC01-6
Only One Name Means ProTek’Tion™
typical device characteristics
figure 2
PULSE WAVEFORM
IPP - Peak Pulse Current - % of IPP
tf
TEST
WAVEFORM
PARAMETERS
tf = 10µs
td = 1000µs
100
Peak Value IPP
td = t/(IPP/2)
50
e-t
0
0
1
2
3
t - Time - ms
figure 4
POWER DERATING CURVE
tf
Peak Value IPP
100
100
TEST
WAVEFORM
PARAMETERS
tf = 10µs
td = 160µs
td = t/(IPP/2)
50
e-t
0
0
150
60
40
20
0
300
t - Time - µs
05071.R9 9/12
Peak Pulse Power
10/1000µs
80
% Of Rated Power
IPP - Peak Pulse Current - % of IPP
figure 3
PULSE WAVEFORM
0
25
50
75
100
125
150
TL - Lead Temperature - °C
Page 3
www.protekdevices.com
05071
PLC01-6
Only One Name Means ProTek’Tion™
SPICE MODEL
figure 1
spice model
I/O
ABD
LCRD
LCRD
ABD
Lg
0.7nH
LCABD - Low Capacitance Avalanche Breakdown Diode (TVS)
LCRD: Low Capacitance Rectifier Diode
Lg - Lead Inductance
table 1 - spice parameters
parameter
05071.R9 9/12
unit
abd(tvs)
lcrd
BV
V
8.0
200
IBV
µA
1
0.01
Cjo
pF
9000
50
IS
A
1E-13
1E-15
Vj
V
0.6
0.6
M
-
0.33
0.33
N
-
1
1
RS
Ohms
0.005
0.31
TT
s
1E-8
5E-9
EG
eV
1.11
1.11
Page 4
www.protekdevices.com
05071
PLC01-6
Only One Name Means ProTek’Tion™
SO-16WB package information
outline dimensions
dim
millimeters
-A-
inches
min
max
min
max
A
10.15
10.45
0.400
0.411
B
7.40
7.60
0.292
0.299
C
2.23
2.65
0.093
0.104
D
0.35
0.49
0.014
0.019
F
0.50
0.90
0.020
0.035
G
1.27 BSC
-B1
0.05 BSC
0.25
0.32
0.010
0.012
K
0.10
0.25
0.004
0.008
P
10.05
10.55
0.395
0.415
R
0.25
0.50
0.010
0.019
NOTES
-T- = Seating plane and datum surface.
Dimensions “A” and “B” are datum.
Dimensions “A” and “B” do not include mold protrusion.
Maximum mold protrusion is 0.015” (0.380mm) per side.
Dimensioning and tolerances per ANSI Y14.5M, 1982.
Dimensions are exclusive of mold flash and metal burrs.
dim
max
min
max
1.14
1.40
0.045
0.055
B
0.64
0.89
0.025
0.035
C
10.67
-
0.420
-
D
8.13
8.38
0.320
0.330
E
1.02
1.27
0.040
0.050
NOTES
05071.R9 9/12
R X 45°
C
-T-
+ 0.010” (0.25mm) M T B S A S
K
F
16 PL
B
inches
min
1. Controlling dimension: inches.
D
A
A
+ 0.010” (0.25mm) M B M
0° - 10°
pad layout dimensions
millimeters
P
8 PL
8
G
J
1.
2.
3.
4.
5.
6.
9
16
C
D
E
Page 5
www.protekdevices.com
J
05071
PLC01-6
Only One Name Means ProTek’Tion™
TAPE AND REEL
P0
D
t
10 Pitches Cumulative
Tolerance on tape ± 0.2
P2
E
F
W
K0
B0
A0
P
User Direction of Feed
specifications
Reel Dia.
330mm (13”)
Tape
Width
A0
B0
K0
D
E
F
W
P0
P2
P
16mm 10.80 ± 0.10 10.70 ± 0.10 3.30 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10
tmax
0.25
Notes
1.
2.
3.
4.
5.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T13 = 13” Reel - 1,000 pieces per 16mm tape.
Bulk product shipped in tubes of 37 pieces per tube.
Marking on Part - part number, date code, logo and pin one defined by dot on top of package.
Package outline per document number 06008.R2 10/09
ORDERING INFORMATION
base PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
PLC01-6
-LF
-T13
1,000
13”
37
This device is only available in a Lead-Free configuration.
05071.R9 9/12
Page 6
www.protekdevices.com
05071
PLC01-6
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses
(NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog
switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05071.R9 9/12
Page 7
www.protekdevices.com