05071 PLC01-6 Only One Name Means ProTek’Tion™ high powered MULTI-LINE low capacitance TVS ARRAY Description The PLC01-6 is a high powered multi-line low capacitance transient voltage suppressor array that provides board level protection for Bellcore 1089, standard TTL and CMOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. This device has a peak pulse power rating of 1500 Watts for an 10/1000µs waveshape. The PLC01-6 meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-16WB package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs -L3(Line-Gnd), L4(Line-Line) & L1(Power) • 1,500 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Low Clamping Voltage • 100A (10/1000µs) per Bellcore 1089 (Intra-Building) • 200A (10/160µs) per FCC Part 68 • ESD Protection > 25 kilovolts • Bidirectional Configuration • Protects 1 Line • RoHS Compliant • REACH Compliant • T1/E1 Line Cards • Telecommunications Equipment • xDSL, USB, SCSI & Ethernet Interfaces • Cellular Base Stations • Data & Bus Lines for FCC Part 68 Applications Mechanical characteristics • Molded JEDEC SO-16 (Wide Body) Package • Approximate Weight: 0.5 grams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 16mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 05071.R8 1/11 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 Page 1 www.protekdevices.com 05071 PLC01-6 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Power (tp = 10/1000µs) - See Figure 1 PPP 1,500 Watts Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) RATED STAND-OFF VOLTAGE minimum breakdown voltage MAXIMUM CLAMPING VOLTAGE (Note 2) MAXIMUM CLAMPING VOLTAGE (Note 3) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE VWM VOLTS @1mA V(BR) VOLTS @I P = 100A VC VOLTS @I P = 200A VC VOLTS @V WM ID µA @0V, 1MHz C pF 6.0 8.0 15.0 16.0 25 50 PLC01-6 Notes 1. Electrical characteristics apply from pins 13-16 to 1-4 and 5-8 to 9-12 - see pin configuration. 2. VC tested at 10/1000µs impluse waveform. 3. 10/160µs impulse waveform per FCC Part 68. figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - kilowatts 100 10 1500W, 10/1000µs Waveform 1 0.1 0.1 05071.R8 1/11 1 10 100 td - Pulse Duration - µs Page 2 1,000 10,000 100,000 www.protekdevices.com 05071 PLC01-6 Only One Name Means ProTek’Tion™ typical device characteristics figure 2 PULSE WAVEFORM IPP - Peak Pulse Current - % of IPP tf TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP td = t/(IPP/2) 50 e-t 0 0 1 2 3 t - Time - ms figure 4 POWER DERATING CURVE tf Peak Value IPP 100 100 TEST WAVEFORM PARAMETERS tf = 10µs td = 160µs td = t/(IPP/2) 50 e-t 0 0 150 60 40 20 0 300 t - Time - µs 05071.R8 1/11 Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP figure 3 PULSE WAVEFORM 0 25 50 75 100 125 150 TL - Lead Temperature - °C Page 3 www.protekdevices.com 05071 PLC01-6 Only One Name Means ProTek’Tion™ SPICE MODEL figure 1 spice model I/O ABD LCRD LCRD ABD Lg 0.7nH LCABD - Low Capacitance Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance table 1 - spice parameters parameter 05071.R8 1/11 unit abd(tvs) lcrd BV V 8.0 200 IBV µA 1 0.01 Cjo pF 9000 50 IS A 1E-13 1E-15 Vj V 0.6 0.6 M - 0.33 0.33 N - 1 1 RS Ohms 0.005 0.31 TT s 1E-8 5E-9 EG eV 1.11 1.11 Page 4 www.protekdevices.com 05071 PLC01-6 Only One Name Means ProTek’Tion™ SO-16WB package information outline dimensions dim millimeters -A- inches min max min max A 10.15 10.45 0.400 0.411 B 7.40 7.60 0.292 0.299 C 2.23 2.65 0.093 0.104 D 0.35 0.49 0.014 0.019 F 0.50 0.90 0.020 0.035 G 1.27 BSC -B1 0.05 BSC 0.25 0.32 0.010 0.012 K 0.10 0.25 0.004 0.008 P 10.05 10.55 0.395 0.415 R 0.25 0.50 0.010 0.019 NOTES -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. dim max min max 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 10.67 - 0.420 - D 8.13 8.38 0.320 0.330 E 1.02 1.27 0.040 0.050 NOTES 05071.R8 1/11 R X 45° C -T- + 0.010” (0.25mm) M T B S A S K F 16 PL B inches min 1. Controlling dimension: inches. D A A + 0.010” (0.25mm) M B M 0° - 10° pad layout dimensions millimeters P 8 PL 8 G J 1. 2. 3. 4. 5. 6. 9 16 C D E Page 5 www.protekdevices.com J 05071 PLC01-6 Only One Name Means ProTek’Tion™ TAPE AND REEL 10 Pitches Cumulative Tolerance on tape ± 0.2 E P2 P0 D t Pin 1 F K0 W B0 A0 P User Direction of Feed specifications Reel Dia. 330mm (13”) Tape Width A0 B0 K0 D E F W P0 P2 P 16mm 10.80 ± 0.10 10.70 ± 0.10 3.30 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T13 = 13” Reel - 1,000 pieces per 16mm tape. Bulk product shipped in tubes of 37 pieces per tube. Marking on Part - part number, date code, logo and pin one defined by dot on top of package. Package outline per document number 06008.R2 10/09 ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PLC01-6 -LF -T13 1,000 13” 37 05071.R8 1/11 Page 6 www.protekdevices.com 05071 PLC01-6 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05071.R8 1/11 Page 7 www.protekdevices.com