PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC260LC3B
v05.0414
MIXERS - SINGLE & DOUBLE BALANCED - SMT
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
Typical Applications
Features
The HMC260LC3B is ideal for:
Passive: No DC Bias Required
• Point-to-Point Radios
Input IP3: +20 dBm
• Point-to-Multi-Point Radios & VSAT
LO/RF Isolation: 40 dB
• Test Equipment & Sensors
Wide IF Bandwidth: DC - 8 GHz
• Military End-Use
12 Lead Ceramic 3x3 mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC260LC3B is a general purpose double
balanced mixer in a leadless RoHS compliant
SMT package that can be used as an upconverter
or downconverter between 14 and 26 GHz. This
mixer requires no external components or matching
circuitry. The HMC260LC3B provides excellent LO to
RF and LO to IF suppression due to optimized balun
structures. The mixer operates with LO drive levels
above +9 dBm. The HMC260LC3B eliminates the
need for wire bonding, allowing use of surface mount
manufacturing techniques.
Electrical Specifications, TA = +25° C, IF= 1 GHz, LO= +13 dBm*
Parameter
Min.
Typ.
Max.
Min.
Typ.
Frequency Range, RF & LO
14 - 18
18 - 26
Frequency Range, IF
DC - 8
DC - 8
Conversion Loss
Noise Figure (SSB)
7.5
10.5
7.5
10.5
Max.
Units
GHz
GHz
9
12
dB
9
12
dB
LO to RF Isolation
34
40
30
35
dB
LO to IF Isolation
24
30
24
35
dB
RF to IF Isolation
15
25
25
30
dB
IP3 (Input)
18
20
dBm
IP2 (Input)
50
50
dBm
1 dB Gain Compression (Input)
12
14
dBm
*Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz.
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
Isolation
Conversion Gain vs. Temperature
-10
RF/IF
LO/RF
LO/IF
-5
-10
-15
+25 C
+85 C
-40 C
-20
-30
-40
-50
-20
-60
13
15
17
19
21
23
25
27
13
15
17
FREQUENCY (GHz)
Conversion Gain vs. LO Drive
23
25
27
23
25
27
25
27
0
RF
LO
-5
-5
RETURN LOSS (dB)
CONVERSION GAIN (dB)
21
Return Loss
0
-10
+9 dBm
+11 dBm
+13 dBm
+15 dBm
-15
-10
-15
-20
-25
-20
13
15
17
19
21
23
25
13
27
15
17
19
21
FREQUENCY (GHz)
FREQUENCY (GHz)
Upconverter Performance
Conversion Gain vs. LO Drive
IF Bandwidth
0
CONVERSION GAIN (dB)
0
-5
RESPONSE (dB)
19
FREQUENCY (GHz)
-10
IF Return Loss
Conversion Gain
-15
-20
MIXERS - SINGLE & DOUBLE BALANCED - SMT
0
ISOLATION (dB)
CONVERSION GAIN (dB)
0
-5
-10
+9 dBm
+11 dBm
+13 dBm
+15 dBm
-15
-20
0
2
4
6
8
FREQUENCY (GHz)
10
12
13
15
17
19
21
23
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
2
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
25
20
20
15
15
IP3 (dBm)
IP3 (dBm)
Input IP3 vs. Temperature *
25
10
+9 dBm
+11 dBm
+13 dBm
+15 dBm
5
+25 C
+85 C
-40 C
10
5
0
0
13
15
17
19
21
23
25
13
27
15
17
80
70
70
60
60
50
50
IP2 (dBm)
80
40
30
25
27
30
25
27
+25 C
+85 C
-40 C
10
0
0
13
15
17
19
21
23
25
27
13
15
LO FREQUENCY (GHz)
17
19
21
23
LO FREQUENCY (GHz)
MxN Spurious Outputs
Input P1dB vs. Temperature
18
nLO
mRF
16
P1dB (dBm)
23
40
20
+9 dBm
+11 dBm
+13 dBm
+15 dBm
10
21
Input IP2 vs. Temperature *
Input IP2 vs. LO Drive *
20
19
LO FREQUENCY (GHz)
LO FREQUENCY (GHz)
IP2 (dBm)
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Input IP3 vs. LO Drive *
14
12
+25 C
+85 C
-40 C
10
0
1
2
3
4
0
xx
-2
17
xx
xx
1
18
0
38
50
78
2
82
74
71
65
84
3
xx
90
95
77
90
4
xx
xx
93
98
104
RF = 18 GHz @ -10 dBm
LO = 17 GHz @ +13 dBm
All values in dBc below the IF output power level.
8
6
13
15
17
19
21
23
25
27
FREQUENCY (GHz)
* Two-tone input power = -10 dBm each tone, 1 MHz spacing.
3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
RF / IF Input
+15 dBm
LO Drive
+27 dBm
Channel Temperature
150 °C
Continuous Pdiss (Ta = 85 °C)
(derate 3.95 mW/°C above 85 °C)
260 mW
Thermal Resistance
(junction to ground paddle)
253 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK,
OR LASER MARK LOCATED APPROX. AS SHOWN.
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Absolute Maximum Ratings
Package Information
Part Number
Package Body Material
Lead Finish
HMC260LC3B
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H260
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Pin Descriptions
5
Pin Number
Function
Description
1, 3, 4, 6, 7, 9
GND
Package bottom must also be connected to RF/DC ground.
2
LO
This pin is DC coupled
and matched to 50 Ohm.
5
IF
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to DC,
this pin must not source or sink more than 2 mA of current or
part non-function and possible part failure will result.
8
RF
This pin is DC coupled
and matched to 50 Ohm.
10, 11, 12
N/C
No connection required. These pins may be connected to RF/
DC ground without affecting performance.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC260LC3B
v05.0414
GaAs MMIC FUNDAMENTAL
MIXER, 14 - 26 GHz
List of Materials for Evaluation PCB 109952 [1]
Item
Description
J1, J2
SRI SMA Connector
J3
Johnson SMA Connector
U1
HMC260LC3B Mixer
PCB [2]
117611 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25 RF
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
MIXERS - SINGLE & DOUBLE BALANCED - SMT
Evaluation PCB
6