HMC553LC3B v04.1208 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz Typical Applications Features The HMC553LC3B is ideal for: Passive Double Balanced Topology • Point-to-Point Radios High LO/RF Isolation: 50 dB • Point-to-Mulit-Point Radios Low Conversion Loss: 7 dB • Test Equipment & Sensors Wide IF Bandwidth: DC - 5 GHz • Military End-Use Robust 1,000V ESD, Class 1C 12 Lead Ceramic 3x3mm SMT Package: 9mm2 Functional Diagram General Description The HMC553LC3B is a general purpose double balanced mixer in a leadless RoHS compliant SMT package that can be used as an upconverter or downconverter between 7 and 14 GHz. This mixer is fabricated in a GaAs MESFET process, and requires no external components or matching circuitry. The HMC553LC3B provides excellent LO to RF and LO to IF isolation due to optimized balun structures and operates with LO drive levels as low as +9 dBm. The RoHS compliant HMC553LC3B eliminates the need for wire bonding, and is compatible with high volume surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, IF= 100 MHz, LO= +13 dBm* Parameter Min. Typ. Max. Min. Typ. Max. Frequency Range, RF & LO 7 - 11 11 - 14 GHz Frequency Range, IF DC - 5 DC - 5 GHz Conversion Loss 7 9.5 8 10 dB Noise Figure (SSB) 7 9.5 8 10 dB LO to RF Isolation 40 50 35 45 dB LO to IF Isolation 28 34 30 36 dB RF to IF Isolation 15 22 25 30 dB IP3 (Input) 18 22 dBm IP2 (Input) 48 48 dBm 1 dB Gain Compression (Input) 10 11.5 dBm *Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 9 - 298 Units For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC553LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 0 RF/IF LO/RF LO/IF -10 -5 ISOLATION (dB) -10 +25C +85C -40C -15 -20 -30 9 -40 -50 -20 -60 6 7 8 9 10 11 12 13 14 15 6 7 8 FREQUENCY (GHz) 11 12 13 14 15 Return Loss @ LO = +13 dBm 0 0 -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 10 FREQUENCY (GHz) Conversion Gain vs. LO Drive -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 -10 -15 RF LO -20 -20 -25 6 7 8 9 10 11 12 13 14 15 6 7 8 FREQUENCY (GHz) 9 10 11 12 13 14 15 13 14 15 FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive IF Bandwidth @ LO = +13 dBm 0 CONVERSION GAIN (dB) 0 RESPONSE (dB) 9 -5 -10 IF Return Loss Conversion Gain -15 -20 -5 -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 MIXERS - SINGLE & DOUBLE BALANCED - SMT CONVERSION GAIN (dB) 0 -20 0 1 2 3 4 FREQUENCY (GHz) 5 6 6 7 8 9 10 11 12 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 299 HMC553LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz Input IP3 vs. Temperature @ LO = +13 dBm * 30 30 25 25 IP3 (dBm) 9 IP3 (dBm) Input IP3 vs. LO Drive * 20 15 +9 dBm +11 dBm +13 dBm +15 dBm 15 +25C +85C -40C 10 5 5 7 8 9 10 11 12 13 14 7 8 9 FREQUENCY (GHz) 60 50 50 IP2 (dBm) IP2 (dBm) 11 12 13 14 12 13 14 Input IP2 vs. Temperature @ LO = +13 dBm * 60 40 +9 dBm +11 dBm +13 dBm +15 dBm 30 10 FREQUENCY (GHz) Input IP2 vs. LO Drive * 40 +25C +85C -40C 30 20 20 7 8 9 10 11 12 13 14 7 8 9 FREQUENCY (GHz) 10 11 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +13 dBm MxN Spurious Outputs 14 nLO mRF 12 P1dB (dBm) MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 20 10 +25C +85C -40C 8 0 1 2 3 0 xx 7 50 38 58 1 22 0 41 53 65 2 100 72 62 73 102 3 103 100 96 71 90 4 xx 105 101 104 111 RF = 10.1 GHz @ -10 dBm LO = 10 GHz @ +13 dBm All values in dBc below the IF output power level. 6 7 8 9 10 11 12 13 14 FREQUENCY (GHz) * Two-tone input power = -10 dBm each tone, 1 MHz spacing. 9 - 300 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 4 HMC553LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz Absolute Maximum Ratings +25 dBm LO Drive +25 dBm Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 2.75 mW/°C above 85 °C) 178 mW Thermal Resistance (channel to ground paddle) 364 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT RF / IF Input 9 - 301 HMC553LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz Pin Descriptions MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 9 - 302 Pin Number Function Description 1, 3, 4, 6, 7, 9 GND Package bottom must also be connected to RF/DC ground. 2 LO This pin is DC coupled and matched to 50 Ohms. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is DC coupled and matched to 50 Ohms. 10, 11, 12 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC553LC3B v04.1208 GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz Evaluation PCB List of Materials for Evaluation PCB 109952 [1] Item Description J1 - J2 SRI SMA Connector J3 Johnson SMA Connector U1 HMC553LC3B Mixer PCB [2] 117611 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25 FR The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 9 - 303