Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC277MS8 / 277MS8E v00.0906 MIXERS - SGL-BAL - SMT 9 GaAs MMIC SMT SINGLE BALANCED MIXER, 0.7 - 1.2 GHz Typical Applications Features The HMC277MS8 / HMC277MS8E is ideal for: Passive Topology • Cellular / 3G Infrastructure LO / RF Isolation: 26 dB • Basestations & Repeaters Input IP3: +21 dBm • GSM, CDMA & WCDMA Low Conversion Loss: 9 dB • Subscribers & Portables RoHS Compliant MSOP-8 Package Functional Diagram General Description The HMC277MS8 & HMC277MS8E are general purpose single balanced mixers in 8 lead plastic surface mount Mini Small Outline Packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and a novel planar transformer balun on the chip. The HMC277MS8(E) requires no external matching components, and is ideal for upconverter and downconverter applications. The RF port is balanced via the MMIC balun while the LO port is connected directly to the diodes. This product is pin for pin compatible with the HMC272MS8(E) which operates from 1.7 to 3.0 GHz. Electrical Specifi cations, TA = +25° C, LO = +13 dBm, IF = 100 MHz* Parameter Min. Typ. Frequency Range, RF & LO 0.7 - 1.2 Frequency Range, IF DC - 0.3 Max. GHz GHz Conversion Loss 9 10.5 dB Noise Figure (SSB) 9 10.5 dB LO to RF Isolation 20 26 LO to IF Isolation 8 12 dB IP3 (Input) 17 21 dBm 1 dB Compression (Input) 9 12 dBm *Unless otherwise noted, all measurements performed as a downconverter with low side LO. 9 - 128 Units For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com dB HMC277MS8 / 277MS8E v00.0906 GaAs MMIC SMT SINGLE BALANCED MIXER, 0.7 - 1.2 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 0 -10 -5 -10 +25 C +85 C -40 C -15 -20 0.5 0.7 0.9 1.1 -20 -30 RF/IF LO/RF LO/IF -50 1.3 1.5 -60 0.5 1.7 0.7 FREQUENCY (GHz) 1.1 1.3 1.5 1.7 Return Loss @ LO = +13 dBm 0 0 -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 0.9 FREQUENCY (GHz) Conversion Gain vs. LO Drive -10 -15 +7 dBm +9 dBm +11 dBm +13 dBm +15 dBm -20 -25 0.5 -10 -15 -20 RF LO -25 -30 0.7 0.9 1.1 1.3 1.5 1.7 0 0.5 FREQUENCY (GHz) 1 1.5 2 2.5 FREQUENCY (GHz) IF Bandwidth & IF Return Loss @ LO = +13 dBm P1dB vs. Temperature @ LO = +13 dBm 15 0 13 Conversion Gain IF Return Loss P1dB (dBm) -5 RESPONSE (dB) 9 -40 MIXERS - SGL-BAL - SMT ISOLATION (dB) CONVERSION GAIN (dB) 0 -10 11 9 +25 C +85 C -40 C -15 7 -20 0 0.1 0.2 0.3 0.4 IF FREQUENCY (GHz) 0.5 0.6 5 0.5 0.7 0.9 1.1 1.3 1.5 1.7 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 129 HMC277MS8 / 277MS8E v00.0906 GaAs MMIC SMT SINGLE BALANCED MIXER, 0.7 - 1.2 GHz Input IP3 vs. Temperature @ LO = +13 dBm 25 25 23 23 INPUT IP3 (dBm) 9 INPUT IP3 (dBm) Input IP3 vs. LO Drive 21 19 +11dBm +13dBm +15dBm 15 0.5 0.7 0.9 1.1 19 +25 C +85 C -40 C 17 1.3 1.5 15 0.5 1.7 0.7 FREQUENCY (GHz) 1.1 11 dBm 13 dBm 15 dBm 1.7 1.5 1.7 +25 C +85 C -40 C INPUT IP2 (dBm) 60 50 40 30 50 40 30 0.7 0.9 1.1 1.3 1.5 1.7 20 0.5 0.7 FREQUENCY (GHz) 0.9 1.1 Harmonics of LO nLO nLO Spur at RF Port 0 1 0 xx -15 4 1 19 0 36 2 44 49 52 40 3 69 83 87 62 4 95 90 90 93 RF = 0.96 GHz @ -5 dBm LO = 0.8 GHz @ +13 dBm All values in dBc relative to the IF 2 1.3 FREQUENCY (GHz) MxN Spurious Outputs 9 - 130 1.5 70 60 mRF 1.3 Input IP2 vs. Temperature @ LO = +13 dBm 70 20 0.5 0.9 FREQUENCY (GHz) Input IP2 vs. LO Drive INPUT IP2 (dBm) MIXERS - SGL-BAL - SMT 17 21 3 4 LO Frequency (GHz) 1 2 3 4 25 19 38 36 0.5 31 0.7 26 19 56 35 14 46 63 0.9 40 26 14 49 40 74 78 1.1 29 20 48 39 1.3 31 25 49 1.5 39 27 29 58 42 LO = +13 dBm Values in dBc below input LO level measured at the RF port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC277MS8 / 277MS8E v00.0906 GaAs MMIC SMT SINGLE BALANCED MIXER, 0.7 - 1.2 GHz Absolute Maximum Ratings RF / IF Input +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A 9 MIXERS - SGL-BAL - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC277MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC277MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H277 XXXX [2] H277 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 131 HMC277MS8 / 277MS8E v00.0906 GaAs MMIC SMT SINGLE BALANCED MIXER, 0.7 - 1.2 GHz Pin Descriptions MIXERS - SGL-BAL - SMT 9 9 - 132 Pin Number Function Description 1, 3, 5 GND This pin must be connected to RF ground. 2 LO This pin is AC coupled and matched to 50 Ohms. 4, 7 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 6 IF This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor. Choose value of capacitor to pass IF frequency desired. For operation to DC, this pin must not sink/source more than 40 mA of current or failure may result. 8 RF This pin is DC coupled and matched to 50 Ohms. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC277MS8 / 277MS8E v00.0906 GaAs MMIC SMT SINGLE BALANCED MIXER, 0.7 - 1.2 GHz Evaluation Circuit Board MIXERS - SGL-BAL - SMT 9 List of Materials for Evaluation PCB 115791 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC277MS8 / HMC272MS8E Mixer PCB [2] 102643 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 133