05433 PLRO1206 Series Only One Name Means ProTek’Tion™ polymer ptc device Description Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices are suitable for automated assembly and are designed to save on board space. ptc device Features applications • Resettable Over-Current Protection • Very Low Resistance • High Current Rating • Small Footprint of 1206 • Fast Time-to-Trip • Lead-Free Solder Termination • RoHS & REACH Compliant • Mobile Phone Battery Packs • Cordless Phone Battery Packs • Mobile Radio Packs • Computer Battery Packs • Camcorder Battery Packs • SMART Phone Battery Packs • Computer Motherboards Mechanical characteristics ENVIRONMENTAL SPECIFICATIONS • Surface Mount Device: Size 1210 • Approximate Weight: 0.0164 grams • Lead-Free • 8mm Tape and Reel Per EIA Standard 481 • Recommended Storage Conditions: 40°C to 85°C • Passive Aging: 85°C, 1000 Hours • Moisture Resistance: 85% RH, 85°C, 1000 Hours • Thermal Shock: -40°C to 85°C, 30 Minute Cycle, 20 Cycles • Solder Leach Resistance and Terminal Adhesion: Per EIA-576 Test 05433.R0 7/13 Page 1 www.protekdevices.com 05433 PLRO1206 Series Only One Name Means ProTek’Tion™ typical device characteristics ELECTRICAL specifications @ 25°c PART NUMBER marking code HOLDING CURRENT TRIP OPERATING INTERRUPT MAXIUM CURRENT VOLTAGE CURRENT TIME-TO-TRIP IH Amps IT AMPS V DC VOLTS I MAX AMPS @5 I h A t trip Seconds maximum tripped state POWER DISSIPATION @6V Pd watts reference maximum resistance two hours (Note 1) post reflow r resistance ohms R min typ ohms PLRO1206-300 ? 3.0 6.0 6 50 4.0 1.0 0.003 0.008 0.020 PLRO1206-380 L 3.0 8.0 6 50 4.0 1.0 0.002 0.006 0.018 Notes 1. The maximum resistance of two hours post reflow is a reference value. The value may change a little according to reflow conditions and soldering state. THERMAL DERATING CHART - IH(A) PART NUMBER -40°C -20°C 0°C 25°C 40°C 50°C 60°C 70°C PLRO1206-300 4.8 4.2 3.6 3.0 2.5 2.2 2.0 1.6 PLRO1206-380 5.4 4.8 4.0 3.8 3.0 2.5 2.2 1.7 05433.R0 7/13 Page 2 www.protekdevices.com 05433 PLRO1206 Series Only One Name Means ProTek’Tion™ package OUTLINE AND PAD LAYOUT information outline dimensions dim millimeters D C inches min max min max A 3.00 3.40 0.12 0.14 B 1.50 1.80 0.06 0.07 C E 1.00 B 0.04 D 0.25 0.75 0.01 0.03 E 0.05 0.45 0.002 0.018 A Notes 1. Dimensions are exclusive of mold flash and metal burrs. millimeters inches NOM NOM F 1.80 0.07 G 1.00 0.04 H 1.80 0.07 dim G G outline dimensions F Notes 1. Dimensions are exclusive of mold flash and metal burrs. 05433.R0 7/13 H Page 3 www.protekdevices.com 05433 PLRO1206 Series Only One Name Means ProTek’Tion™ TAPE AND REEL D t P2 Top Cover Tape 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 F K0 W B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P t 1.77 ± 0.10 3.40 ± 0.10 0.90 ± 0.10 1.55 ± 0.05 1.75 ± 0.10 3.50 ± 0.10 8.00 ± 0.20 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.22±0.05 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 4,000 pieces per 8mm tape. Marking on Part - marking code. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PLRO1206-xxx N/A -T7 4,000 7” N/A This device is only available in a Lead-Free configuration. 05433.R0 7/13 Page 4 www.protekdevices.com 05433 PLRO1206 Series Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2013 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05433.R0 7/13 Page 5 www.protekdevices.com