Hittite's Connectorized Modules Extend HMC-T2000 Synthesizer Performance

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
New Article Feature by Hittite Microwave Corporation
Hittite’s Connectorized
Modules Extend HMC-T2000
Synthesizer Performance
HMC-T2000
Hittite Microwave Corporation
April 2009
FEATURED ARTICLE
ENHANCE THE PERFORMANCE OF THE
F
requency synthesizers are the
cornerstone of many RF/Microwave test and measurement
applications ranging from R & D labs to
production floor test racks, often dominating capital
expenditure budgets. Through the application of our
extensive connectorized module product line, Hittite
Microwave can help customers extend the performance
of our HMC-T2000 Synthesized Signal Generator.
Frequency synthesizers that provide 20, 40, or 50 GHz
and/or >+20 dBm output power require expensive
options and often require major purchasing decisions.
Lead times for these expensive synthesizers can also
extend for several months, in addition to the internal
purchasing approval cycle.
Table 1a and 1b shows that the frequency range, output
power and dynamic range of the HMC-T2000 can all
be significantly enhanced with the right combination of
connectorized modules. Our HMC-T2000 and module
products are in stock and available for immediate
purchase via e-commerce or direct purchase order.
HMC-T2000 Synthesized
Signal Generator Overview
The HMC-T2000 Synthesized Signal Generator is the
second in Hittite’s line of high quality signal generators.
With its broad frequency range and high power signal
capability it’s the ideal choice for cost-constrained
frequency generation applications. This light weight
compact unit has been carefully designed with mobility
and functionality in mind.
The HMC-T2000 can easily be programmed for CW or
swept frequency screening while the broad frequency
range of 700 MHz to 8 GHz covers many widely used
communication bands with a frequency resolution of
1 MHz and a fast switching speed of 200 us. The high
output power of +17 dBm, with 0.5 dB resolution, allows
the user to simplify test configurations where driver
amplifiers are typically required. The output power is
leveled across certain frequency bands; however, the
user may access the maximum output power of +21
dBm if desired. Harmonic rejection is an impressive 30
dBc and 26 dBc at 1 GHz and 8 GHz respectively, and
the spurious products are less than 45 dBc across the
band.
This versatile signal generator also features a USB
interface and innovative control software ensuring
carefree integration within multiple test environments.
An installation disk accompanies each unit and includes
all of the drivers required to remotely control the device,
as well as a user friendly LabWindows™ based GUI
interface compatible with Windows XP® or Windows
Extend Frequency Performance to 50 GHz
HMC-C040
Increase Dynamic Range to 120 dB
HMC-C053
HMC-C056
Increase Output Power to +27 dBm
HMC-C057
HMC-C025
Add Pulse Capability
HMC-C032
HMC-C019
HMC-C004
HMC-C018
HMC-C034
HMC-T2000
2
April 2009
VISIT US AT: www.hittite.com
HMC-T2000 WITH HITTITE MODULES
FEATURED ARTICLE
Table 1a: HMC-T2000 Range of Improved Performance
Parameter
HMC-T2000
HMC-T2000
+ Hittite Connectorized Module
Frequency Range
0.7 to 8 GHz
0.07 to 50 GHz
Output Power
Leveled/Max
+10 / +17 dBm
+23 / +27 dBm
Dynamic Range
32 dB
60, 90 or 120 dB
Hittite offers a line of standard microwave module
products that leverage its extensive portfolio of high
performance monolithic microwave integrated circuits
(MMICs). These robust, innovative products are ideal for
use in laboratory, industrial and automated test equipment (ATE) applications as well as in custom military and
commercial equipment. Currently, 62 module products
are offered with functions that include amplifiers, mixers,
dividers, multipliers, switches, attenuators, phase
shifters, log detectors, high speed logic, and VCOs.
In addition to standard product offerings, Hittite can
integrate single or multiple functions into a single custom
module tailored to specific customer requirements.
Extending Power Output Capability
up to +27 dBm
The newly released HMC-C057 is a GaAs MMIC PHEMT
Power Amplifier in a miniature, hermetic module with
replaceable SMA connectors which operates between
0.1 GHz and 20 GHz. The amplifier provides 12 dB of
gain, up to +36 dBm output IP3 and up to +28 dBm of
output power at 1 dB gain compression. Gain flatness
is excellent from 2 to 18 GHz making the HMC-C057
ideal for extending the HMC-T2000 output power. The
wideband amplifier I/Os are internally matched to 50
Ohms and are DC blocked. Integrated voltage regulators
allow for flexible biasing of both the negative and positive
supply pins, while internal bias sequencing circuitry
assures robust operation.
25
OUTPUT POWER (dBm)
Hittite’s Connectorized Module Line
Overview
30
20
15
10
HMC-T2000 Leveled
HMC-T2000 + HMC-C057 Leveled
Max (HMC-T2000 + HMC-C057)
Max (HMC-T2000)
5
0
0
1
2
3
4
5
6
7
8
FREQUENCY (GHz)
Figure 1: HMC-T2000 + HMC-C057
Output Power Extension
30
25
OUTPUT POWER (dBm)
VISTA® operating systems. Pulldown menus allow
programming of single or swept modes in frequency
and/or power. Integration of multiple units within a
production test environment is easy, affordable and
repeatable due to the incorporation of integer mode
architecture and the ability to maintain phase coherence
between frequency steps.
20
15
10
HMC-T2000 + HMC-C056 + HMC-C057
5
0
6
8
10
12
14
16
18
Figure 2: HMC-T2000 + HMC-C056 + HMC-C057
Output Power & Frequency Extension
Purchase a HMC-T2000 with
at least one Hittite Connectorized
Module product and
receive a 3% discount on your
purchase order!
Figures 1 and 2 illustrate the end performance of this
VISIT US AT: www.hittite.com
April 2009
3
combination compared with the HMC-T2000 alone as
well as with the HMC-C056 Active Frequency Doubler.
If less DC power consumption or a lower noise figure is
desired, the HMC-C004 Wideband Driver Amplifier offers
similar bandwidth with +24 dBm of output power.
Extending Dynamic Range Capability to
60+ dB
The HMC-C053 is an absorptive Voltage Variable
Attenuator (VVA) operating from DC to 20 GHz. The
HMC-C053 features a simple single voltage attenuation
control from 0 to -3V. The device is ideal in designs
where an analog DC control signal must control RF
signal levels over a 30 dB amplitude range. Its broad
frequency range makes it an attractive choice for many
applications; particularly those involved with AGC or
temperature compensation of multiple gain stages,
and those typically found in microwave radio or test
instrumentation architecture. By placing the HMC-C053
at the output of the HMC-T2000, the user can realize an
analog power control range in excess of 60 dB. Figure
3 displays the minimum and maximum attenuation
characteristics of this combination at 4 GHz. If digital
control is preferred, Hittite offers the HMC-C025 and
the HMC-C018 31.5 dB, 6 bit, digital attenuator modules
which utilize parallel and serial control respectively.
Extending Lower and Upper Operating
Frequencies from 70 MHz to 50 GHz
The HMC-C040 is a low noise Divide-by-10 Static Divider
utilizing InGaP GaAs HBT technology packaged in a
20
10
OUTPUT POWER (dBm)
FEATURED ARTICLE
IMPROVE DYNAMIC & FREQUENCY RANGE
Pout @ HMC-C053
Min Attenuation
(Vctl = 0V)
0
-10
-20
-30
Pout @ HMC-C053
Max Attenuation
(Vctl = -3.0V)
-40
-50
-20
-10
0
10
20
Figure 3: HMC-C053 Dynamic Range
miniature, hermetic module with replaceable SMA
connectors. This device operates from 0.5 to 17 GHz
input frequency from a single +5V DC supply. The low
additive SSB phase noise of -155 dBc/ Hz at 100 kHz
offset helps the user maintain excellent system noise
performance. Combining the HMC-C040 divide-by-10
module with the HMC-T2000 provides an output frequency range of 70 MHz to 800 MHz; ideal for IF
applications.
The HMC-C056 is a x2 Active Frequency Multiplier
utilizing GaAs PHEMT technology in a miniature
hermetic module. When driven by a +6 dBm signal,
the multiplier provides +14 dBm typical output power
from 8 to 21 GHz, and the Fo isolation is 16 dBc at
15 GHz with respect to output signal level. The HMCT2000 coupled with the HMC-C056 will provide a
frequency range of 8 to 16 GHz. This key combination
can also be augmented by the HMC-C057 Power
Table 1b: HMC-T2000 / Connectorized Module
Performance Summary
Combination
4
Benefit
HMC-T2000 + HMC-C057
Extend leveled power to +23 dBm,
max power to +27 dBm
HMC-T2000 + HMC-C056 + HMC-C057
Frequency Range 8-16 GHz,
leveled +25 dBm of output power
HMC-T2000 + HMC-C040
Extend Frequency Range to 70 - 800 MHz
HMC-T2000 + HMC-C056
Extend Frequency Range to 8 - 16 GHz
HMC-T2000 + HMC-C056 + HMC-C032
Extend Frequency Range to 17 - 31 GHz
HMC-T2000 + HMC-C056 + HMC-C032 + HMC-C034
Extend Frequency Range to 37 - 50 GHz
HMC-T2000 + HMC-C053
Extend Dynamic Range to 60 dB
HMC-T2000 + HMC-C019
Add Pulse Capability
April 2009
30
VISIT US AT: www.hittite.com
ADD PULSE MEASUREMENT CAPABILITY
With the HMC-T2000 and HMC-C056 pair, the frequency
range can be extended further by adding other
frequency doublers to this combination. The HMC-C032,
HMC-C033, and HMC-C034 can be used in this fashion
to extend the frequency range from 16 to 50 GHz.
Figure 4 shows some examples of the HMC-T2000
driving these module combinations.
Summary
Hittite Microwave’s HMC-T2000 Synthesized Signal
Generator in combination with our line of connectorized
modules can provide test equipment customers with
an affordable and scalable test solution. Expand the
capability of the HMC-T2000 with the addition of a
connectorized module to:
• Increase Output Power to +28 dBm
• Extend the Frequency Range to 50 GHz
• Extend the Dynamic Range to 60+ dB
• Add Pulsed Testing Capability
Adding Pulse Measurement Capability
The HMC-C019 is a high speed, High Isolation GaAs
MESFET SPST switch housed in a miniature hermetic
module with field replaceable SMA connectors. Covering
DC to 20 GHz, the switch features 100 dB isolation up
to 4 GHz and 65 dB isolation up to 20 GHz. A CMOS
interface allows a +5V bias voltage at very low DC
currents. This non-reflective switch exhibits very fast
switching speeds, with very low switching transients
making it ideal for high speed RF pulse modulation
applications. With a rise time of 6.5 ns, the HMC-C019
can be used to modulate the HMC-T2000 output signal
into pulses with user defined duty cycle. X and Ku band
pulsed applications are also possible when combined
with the HMC-C056 x2 Active Multiplier.
FEATURED ARTICLE
Amplifier and the HMC-C053 Analog VVA to provide a
comprehensive X-band synthesizer solution.
For a limited time Hittite is offering HMC-T2000 and
Connectorized Module combination pricing to help
customers stretch their R&D and production test budgets. Purchase a HMC-T2000 Synthesized Signal
Generator and at least one of our Connectorized Module
products and receive a 3% discount on your entire
purchase order.
The HMC-T2000 Synthesized Signal Generator and
all of our connectorized module products are available
from stock. Released datasheets can be found at www.
hittite.com. To order please visit us on-line at www.hittite.
com or contact us at [email protected].
Figure 4: Frequency Extension
30 GHz Frequency Extension
50 GHz Extension
30
30
HMC-T2000 + HMC-C056 + HMC-C032
HMC-T2000 +
HMC-T2000
+ HMC-C056
HMC-C056 +
HMC-C032
++
HMC-C034
+
HMC-C032
HMC-C034
25
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
25
20
15
10
5
20
15
10
5
0
15
20
25
30
35
0
35
FREQUENCY (GHz)
40
45
50
FREQUENCY (GHz)
Contact us Today with Your Custom Test Instrumentation
Requirements at [email protected]
Windows ® - Windows XP ® and Windows Vista ® are registered trademarks of
Microsoft Corporation. LabWindows™ - LabWindows™ is a licensed trademark
of National Instruments.
VISIT US AT: www.hittite.com
April 2009
5
PRECISE & AFFORDABLE RF SIGNAL GENERATION FOR ATE & LAB ENVIRONMENTS!
Analog & Mixed-Signal ICs, Modules, Subsystems & Instrumentation
$3,998.00
HMC-T2000 Performance
HMC-T2000 Advantages
 High Output Power: +20 dBm
 Versatile: Higher Drive Simplifies Test Set-ups
 Wide Frequency Range: 700 MHz to 8 GHz
 Efficient: Fast Frequency Switching, 200 μs
 Spurious Rejection: < -45 dBc
 Accurate: Incorporates Hittite MMICs
 Phase Continuity Capability; Integer Mode Architecture
 Flexible: Manual or Software Control via USB
USE THESE MODULES TO EXPAND THE CAPABILITY OF THE HMC-T2000
Part Number
Function
Application
Increase Ouput Power
NEW!
HMC-C004
0.01 - 20 GHz Widbeband Driver Amplifier
Increase HMC-T2000 Pout to +23 dBm
HMC-C057
0.1 - 20 GHz, Power Amplifier
Increase HMC-T2000 Pout to +28 dBm
HMC-C013
1.8 - 2.2 GHz, Power Amplifier, 10 Watt
Increase HMC-T2000 Pout to +40 dBm for Cellular / 3G
HMC-C005
0.5 - 18 GHz, Divide-by-2 Prescaler
Extend HMC-T2000 Lower Frequency Limit to 400 MHz
HMC-C056
4 - 10.5 GHz, x2 Active Frequency Multiplier
Extend HMC-T2000 Upper Frequency Limit to 16 GHz
HMC-C032
9 - 14.5 GHz, x2 Active Frequency Multiplier
Extend HMC-T2000 Upper Frequency Limit to 29 GHz [1]
HMC-C033
12 - 16.5 GHz, x2 Active Frequency Multiplier
HMC-C034
16 - 23 GHz, x2 Active Frequency Multiplier
Extend HMC-T2000 Upper Frequency Limit to 32 GHz [1]
Extend HMC-T2000 Upper Frequency Limit to 46 GHz [2]
Extend HMC-T2000 Dynamic Range by 31.5 dB
Extend Frequency Range
Extend Dynamic Range
HMC-C018
DC - 13 GHz, 6-Bit Digital Attenuator
HMC-C025
DC - 20 GHz, 6-Bit Digital Attenuator
Extend HMC-T2000 Dynamic Range by 31.5 dB
HMC-C053
DC - 20 GHz, Voltage Variable Attenuator
Extend HMC-T2000 Dynamic Range by 31.5 dB
Add Pulsed & Multi-Port Capability
HMC-C019
DC - 20 GHz, SPST Hi Isolation Switch
Add Pulsed Testing Capability, 8.5 ns Switching
HMC-C011
DC - 20 GHz, SPDT Hi Isolation Switch
Add Multi-port Capability, 40 dB Isolation
[1] with the HMC-C056
[2] with the HMC-C056 & HMC-C032
Purchase the HMC-T2000 Signal Generator With Any
Connectorized Module & Save 3% On Your Entire Purchase Order!
Hittite Microwave Corporation
Corporate Headquarters
Ph 978-250-3343
HMC Europe, Ltd.
HMC Deutschland GmbH
Northern Europe - HMC Europe, Ltd.
HMC Asia Co., Ltd.
HMC Co., Ltd. Shanghai
Hittite KK
Ph
Ph
Ph
Ph
Ph
Ph
+44-870-766-4355
+49-8031-97654
+44-870-766-4355
+82-2-559-0638
+86-21-6209-8809
+81-3-6853-6854
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Receive the latest product releases at www.hittite.com - click on “My Subscription”
Order On-Line
www.hittite.com