Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC649LP6 / 649LP6E v03.1011 Phase Shifters - Digital - SMT GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz Typical Applications Features The HMC649LP6(E) is ideal for: Low RMS Phase Error: 3° • EW Receivers Low Insertion Loss: 8 dB • Weather & Military Radar High Linearity: +44 dBm • Satellite Communications Positive Control Logic • Beamforming Modules 360° Coverage, LSB = 5.625° 28 Lead QFN Leadless SMT Package: 36mm2 • Phase Cancellation Functional Diagram General Description The HMC649LP6(E) is a 6-bit digital phase shifter which is rated from 3 - 6 GHz, providing 360 degrees of phase coverage, with a LSB of 5.625 degrees. The HMC649LP6(E) features very low RMS phase error of 3 degrees and extremely low insertion loss variation of ±0.5 dB across all phase states. This high accuracy phase shifter is controlled with positive control logic of 0/+5V. The HMC649LP6(E) is housed in a compact 6x6 mm plastic leadless SMT package and is internally matched to 50 Ohms with no external components. Electrical Specifications TA = +25° C, Vss= -5V, Vdd= +5V , Control Voltage= 0/ +5V, 50 Ohm System Parameter Min. Typ. Max. Units 6 GHz Insertion Loss* 8 10.5 Input Return Loss* 13 Frequency Range 3 Output Return Loss* Phase Error* RMS Phase Error Insertion Loss Variation* 10 3.0 - 5.5 GHz 5.5 - 6.0 GHz ±5 -10 dB dB dB +15 / -25 +15 / -32 deg deg 3 deg ±0.5 dB dBm Input Power for 1 dB Compression 29 Input Third Order Intercept 44 Control Voltage Current 35 250 µA Bias Voltage Current 5 15 mA dBm *Note: Major States Shown 0-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC649LP6 / 649LP6E v03.1011 GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz Insertion Loss, Major States Only Normalized Loss, Major States Only 0 3 NORMALIZED LOSS (dB) INSERTION LOSS (dB) -2 -4 -6 -8 -10 2 1 0 -1 -2 -3 -4 -12 2 3 4 5 6 7 2 3 4 Input Return Loss, Major States Only 7 20 15 PHASE ERROR (degrees) -5 RETURN LOSS (dB) 6 Phase Error, Major States Only 0 -10 -15 -20 -25 10 5 0 -5 -10 -15 -20 -30 2 3 4 5 6 2 7 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 FREQUENCY (GHz) FREQUENCY (GHz) Output Return Loss, Major States Only Relative Phase Shift Major States Including All Bits 0 RELATIVE PHASE SHIFT (degrees) 400 -5 RETURN LOSS (dB) 5 FREQUENCY (GHz) FREQUENCY (GHz) Phase Shifters - Digital - SMT 4 -10 -15 -20 -25 350 300 250 200 150 100 50 0 -30 2 3 4 5 FREQUENCY (GHz) 6 7 2 3 4 5 6 7 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 0-2 HMC649LP6 / 649LP6E v03.1011 GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz 30 60 25 55 20 50 RMS AVERAGE MAX 15 IP3 (dBm) RELATIVE PHASE SHIFT (degrees) Input IP3, Major States Only 10 5 45 40 35 0 30 -5 25 -10 20 3 3.5 4 4.5 5 5.5 6 3 3.5 FREQUENCY (GHz) 4.5 5 5.5 6 5.5 6 5.5 6 Input P1dB, Major States Only 120 40 110 35 P1dB (dBm) 100 90 80 30 25 70 60 20 3 3.5 4 4.5 5 5.5 6 3 3.5 FREQUENCY (GHz) 0 15 -2 INSERTION LOSS (dB) RELATIVE PHASE SHIFT (degrees) 4.5 5 Insertion Loss vs. Temperature, Major States Only 20 +25C +85C -40C 10 4 FREQUENCY (GHz) RMS Phase Error vs. Temperature 5 0 -5 -4 -6 -8 -10 -10 -12 3 3.5 4 4.5 5 FREQUENCY (GHz) 0-3 4 FREQUENCY (GHz) Input IP2, Major States Only IP2 (dBm) Phase Shifters - Digital - SMT Relative Phase Shift, RMS, Average, Max, All States 5.5 6 3 3.5 4 4.5 5 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC649LP6 / 649LP6E v03.1011 GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz Phase Error vs. State PHASE ERROR (degrees) 10 3, 4, 5 GHz 5 0 -5 -10 -15 6 GHz -20 -25 0 45 90 135 180 225 270 315 360 STATE (degrees) Absolute Maximum Ratings Bias Voltage & Current Input Power (RFIN) 32 dBm (T= +85 °C) Vdd Idd Bias Voltage Range (Vdd) -0.2 to +12V 5.0 5.4mA Bias Voltage Range (Vss) +0.2 to -12V Vss Iss Channel Temperature (Tc) 150 °C -5.0 5.4mA Thermal Resistance (channel to ground paddle) 160 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Control Voltage State Bias Condition Low (0) 0 to 0.2 Vdc High (1) Vdd ±0.2 Vdc @ 35 µA Typ. Phase Shifters - Digital - SMT 15 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Truth Table Control Voltage Input Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Phase Shift (Degrees) RFIN - RFOUT 0 0 0 0 0 0 Reference* 1 0 0 0 0 0 5.625 0 1 0 0 0 0 11.25 0 0 1 0 0 0 22.5 0 0 0 1 0 0 45.0 0 0 0 0 1 0 90.0 0 0 0 0 0 1 180.0 1 1 1 1 1 1 354.375 Any combination of the above states will provide a phase shift approximately equal to the sum of the bits selected. *Reference corresponds to monotonic setting For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 0-4 HMC649LP6 / 649LP6E v03.1011 GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz Phase Shifters - Digital - SMT Outline Drawing NOTES: 1.LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5.ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC649LP6 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC649LP6E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H646 XXXX H649 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 0-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC649LP6 / 649LP6E v03.1011 GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz Pin Descriptions Function Description 1 Vdd Voltage supply. 2, 20 GND These pins and exposed ground paddle must be connected to RF/DC ground. 3 RFIN This port is DC coupled and matched to 50 Ohms. 4 - 18 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 19 RFOUT This port is DC coupled and matched to 50 Ohms. 22 - 24, 26 - 28 BIT6, BIT5, BIT4, BIT3, BIT2, BIT1 Control Input. See truth table and control voltage tables. 25 Vss Voltage supply. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Phase Shifters - Digital - SMT Pin Number 0-6 HMC649LP6 / 649LP6E v03.1011 GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz Phase Shifters - Digital - SMT Evaluation PCB List of Materials for Evaluation PCB 117720 [1][3] Item Description J1 - J2 PCB Mount SMA RF Connector J3 Header 2mm, 16 Pins C1,C2 1000pF Capacitor, 0402 Pkg. U1 HMC649LP6(E) 6-Bit Digital Phase Shifter PCB [2] 117718 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [3] Please refer to part’s pin description and functional diagram for pin out assignments on evaluation board. 0-7 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC649LP6 / 649LP6E v03.1011 GaAs MMIC 6-BIT Digital Phase Shifter, 3 - 6 GHz Phase Shifters - Digital - SMT Notes: For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 0-8