SR3L10 3A LOW VF TRENCH MOS SCHOTTKY RECTIFIERS 100V PRIMARY CHARACTERISTICS VRRM 100V IFSM 125A VF@3A,TJ=125℃ DO-201AD ● Body Marking Example 3A TJ Max 150℃ VYM Logo 0.50V IO PACKAGE Cathode Band SR3L10 Marking Code 2 1 Date Code (樣品通常不會標示Date Code ) V:代表產品線別 Y:表西元年尾碼, 3-2013,4-2014…以此類推 M:表月份, 如1-1,2-2,---10-O,11-N,12-D FEATURES MECHANICAL DATA EXTREMELY LOW VF CASE：TRANSFER MOLDED TRENCH MOS SCHOTTKY POLARITY：AS MARKED TECHNOLOGY TERMINALS：PURETIN PLATED LOW POWER LOSS / HIGH LEADS：SOLDERABLE PER EFFICIENCY MIL-STD-202, METHOD 208 HIGH FREQENCY OPERATION HIGH FORWARD SURGE CAPABILITY MOISTURE SENSITIVITY LEVEL 1 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% SYMBOL SR3L10 UNIT VRRM VRMS VDC SR3L10 100 70 100 Volts Volts Volts IO 3.0 Amps superimposed on rated load (JEDEC method) IFSM 125 Amps Typical Thermal Resistance (Note 1) RΘJa 25 ℃/W Operating Temperature Range Storage Temperature Range TJ TSTG -55 to +150 -55 to +175 ℃ ℃ RATINGS Marking Code Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave SYMBOL SR3L10 UNIT IF=3A@ Tj=25°C IF=3A@ Tj=125°C VF 0.65 0.55 Volts @Tj =25℃ @Tj =125℃ IR 0.1 10 mAmps CHARACTERISTICS Maximum Forward Voltage (Note 2) Maximum Average Reverse Current at Rated DC Blocking Voltage NOTES :1. BOTH LEADS ATTATCHED TO HEATSINK AT LEAD LENGTH 5mm 2. PULSE TEST: 300µS PULSE WIDTH, 1% DUTY CYCLE. 2015.03 www.willas.com.tw Rev. F02 P1 SR3L10 3A LOW VF TRENCH MOS SCHOTTKY RECTIFIERS 100V FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE RATING 150 PEAK FORWARD SURGE CURRENT AMPERES 5 4 CURRENT AMPERES AVERAGE FORWARD CURRENT RECTIFIED FIG. 1-FORWARD CURRENT DERATING CURVE 3 SR3L10 2 1 0 0 25 5 0 100 1 25 150 175 2 00 8.3 ms Single Half Sine Wave 125 100 75 50 25 0 1 AMBIENT TEMPERATURE, oC 5 10 50 100 FIG. 3- TYPICAL REVERSE FIG. 4- TYPICAL INSTANTANEOUS CHARACTERISTICS FORWARD CHARCTERISTICS 10000 Tj=125℃ 1000 Tj=100℃ 100 10 Tj=25℃ 0 20 40 60 PERCENT OF RATED VOLTAGE PEAK REVERSE VOLTAGE (%) 2015.03 80 100 INSTANTANEOUS FORWARD CURRENT ,AMPERES INSTANTANEOUS REVERSE CURRENT,MICROAMPERES NUMBER OF CYCLES AT 60 Hz 100 Tj=125℃ 10 Tj=25℃ 1.0 Pulse Width = 300uS 1% Duty Cycle 0.1 0.1 0.3 0.5 0.7 0.9 1.1 1 .3 1.5 INSTANTANEOUS FORWARD VOLTAGE VOLTS www.willas.com.tw Rev. F02 P2 SR3L10 3A LOW VF TRENCH MOS SCHOTTKY RECTIFIERS 100V 1.00(25.4)MIN. Outline Drawing DO-201AD .052(1.30) DIA. .048(1.20) .375(9.50) .335(8.50) 1.00(25.4)MIN. .220(5.60) .197(5.00) DIA. Dimensions in inches and (millimeters) Rev.B 2015.03 www.willas.com.tw Rev. F02 P3 SR3L10 3A LOW VF TRENCH MOS SCHOTTKY RECTIFIERS 100V Ordering Information: Device PN SR3L10 -F(1)G(2) ‐WS Packing Ammo Pack:1200pcs/box; 12,000pcs/Carton Note: 1. Packing code, F(T): Tape & Ammo Packing, ( )is old packing code . 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.03 www.willas.com.tw Rev. F02 P4