SR5LϬϰϱ 5A LOW VF TRENCH MOS SCHOTTKY RECTIFIERSϰϱs PRIMARY CHARACTERISTICS VRRM 45V IFSM 125A VF@5A,TJ=125℃ DO-201AD ● Body Marking Example 5A TJ Max 150℃ VYM Logo 0.44V IO PACKAGE Cathode Band SR5L Marking Code 2 1 Date Code (樣品通常不會標示Date Code ) V:代表產品線別 Y:表西元年尾碼, 3-2013,4-2014…以此類推 M:表月份, 如1-1,2-2,---10-O,11-N,12-D FEATURES MECHANICAL DATA EXTREMELY LOW VF CASE：TRANSFER MOLDED TRENCH MOS SCHOTTKY POLARITY：AS MARKED TECHNOLOGY TERMINALS：PURETIN PLATED LOW POWER LOSS / HIGH LEADS：SOLDERABLE PER EFFICIENCY MIL-STD-202, METHOD 208 HIGH FREQENCY OPERATION HIGH FORWARD SURGE CAPABILITY MOISTURE SENSITIVITY LEVEL 1 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL Marking Code Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage SR5L SR5L UNIT Volts Volts Volts IO 5.0 Amps superimposed on rated load (JEDEC method) IFSM 125 Amps Typical Thermal Resistance (Note 1) RΘJa 25 ℃/W Operating Temperature Range Storage Temperature Range TJ TSTG -55 to +150 -55 to +175 ℃ ℃ VRRM VRMS VDC Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave SYMBOL SR5L0 UNIT IF=5A@ Tj=25°C IF=5A@ Tj=125°C VF 0. 0. Volts @Tj =25℃ @Tj =125℃ IR 0. 1 mAmps CHARACTERISTICS Maximum Forward Voltage (Note 2) Maximum Average Reverse Current at Rated DC Blocking Voltage NOTES :1. BOTH LEADS ATTATCHED TO HEATSINK AT LEAD LENGTH 5mm 2. PULSE TEST: 300µS PULSE WIDTH, 1% DUTY CYCLE. 2015.03 www.willas.com.tw Rev. F02 P1 SR5LϬϰϱ 5A LOW VF TRENCH MOS SCHOTTKY RECTIFIERSϰϱs RATINGS AND CHARACTERISTIC CURVES OF SR5L045 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE RATING FIG. 1-FORWARD CURRENT DERATING CURVE 4 3 2 1 0 0 25 50 100 125 150 175 200 PEAK FORWARD SURGE CURRENT AMPERES 5 CURRENT AMPERES AVERAGE FORWARD CURRENT RECTIFIED 150 8.3 ms Single Half Sine Wave 125 100 75 50 25 0 o AMBIENT TEMPERATURE, C 1 5 10 50 100 NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL INSTANTANEOUS FIG. 3- TYPICAL REVERSE FORWARD CHARCTERISTICS 10000 INSTANTANEOUS FORWARD CURRENT ,AMPERES INSTANTANEOUS REVERSE CURRENT,MICROAMPERES CHARACTERISTICS Tj=125℃ 1000 Tj=100℃ 100 10 Tj=25℃ 0 20 40 60 80 100 100 Tj=125℃ 10 Tj=25℃ 1.0 Pulse Width = 300uS 1% Duty Cycle 0.1 0.1 PERCENT OF RATED VOLTAGE PEAK REVERSE VOLTAGE (%) 2015.03 0.3 0.5 0.7 0.9 1.1 1.3 INSTANTANEOUS FORWARD VOLTAGE VOLTS www.willas.com.tw 1.5 Rev. F02 P2 SR5LϬϰϱ 5A LOW VF TRENCH MOS SCHOTTKY RECTIFIERSϰϱs 1.00(25.4)MIN. Outline Drawing DO-201AD .052(1.30) DIA. .048(1.20) .375(9.50) .335(8.50) 1.00(25.4)MIN. .220(5.60) .197(5.00) DIA. Dimensions in inches and (millimeters) Rev.B 2015.03 www.willas.com.tw Rev. F02 P3 SR5LϬϰϱ 5A LOW VF TRENCH MOS SCHOTTKY RECTIFIERSϰϱs Ordering Information: Device PN SR5L045 -F(1)G(2) ‐WS Packing Ammo Pack:1200pcs/box; 12,000pcs/Carton Note: 1. Packing code, F(T): Tape & Ammo Packing, ( )is old packing code . 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.03 www.willas.com.tw Rev. F02 P4