WILLAS FM120-M+ FM4001L THRU THRU 1.0A GENERAL PURPOSE RECTIFIERS - 50V- 1000V 1.0A SURFACE MOUNT SCHOTTKY BARRIER SMA-LRECTIFIERS PACKAGE-20V- 200V FM1200-M+ FM4007L Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. Features • Low power loss, high efficiency. • High current capability, low forward voltage drop. process design, excellent power dissipation offers • Batch surge capability. • High better reverse leakage current and thermal resistance. Guardring for overvoltage protection. • • Low profile surface mounted application in order to high-speed • Ultra board optimize space.switching. Silicon epitaxial planar chip, metal silicon junction. • • High current capability. parts meet environmental standards of • Lead-free • High surge capability. MIL-STD-19500 /228 • Glass passivated chip junction. RoHS product for packing code suffix "G" • • Moisture Sensitivity Level 1 Package outline 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. SMA-L 0.071(1.8) 0.056(1.4) 0.209(5.3) 0.185(4.7) 0.012(0.3) Typ. Halogen free product for packing code suffix "H" 0.114(2.9) 0.091(2.3) Mechanical data 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 rated flame retardant plastic, SOD-123H • Case : Moldeddata Mechanical , • Terminals :Plated terminals, solderable per MIL-STD-750 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Epoxy:UL94-V0 rated flame retardant • Polarity : Indicated by cathode band • Case : Molded plastic, SMA-L • Mounting Position : Any • Terminals : Solder plated, solderable per • Weight :MIL-STD-750, Approximated 0.011 gram Method 2026 0.080(2.0) Dimensions in inches and (millimeters) 0.063(1.6) 0.032(0.8) Typ. 0.032 (0.8) Typ. • Polarity : Indicated by cathode band AND ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS Dimensions in inches and (millimeters) • Mounting Any Ratings at 25℃Position ambient:temperature unless otherwise specified. • Weight Approximated gramof inductive load. Single phase: half wave, 60Hz,0.05 resistive For capacitive load, derate current by 20% RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI Marking Code 12 13 14 (AT 15 T =25 C 16 unless Maximum ratings and Electrical Characteristics o VRRM Maximum Recurrent Peak Reverse Voltage PARAMETER 20 30 CONDITIONS 14 21 A 50 28 35 VRMS See Fig.2 20 30 40 50 VDC Maximum Averagesurge Forward Rectified Current 8.3ms single IO half sine-wave superimposed on Forward current rate load (JEDEC methode) Peak Forward Surge Current 8.3 ms single half sine-wave V R = V RRM T J = 25 OC IFSM Reverse current superimposed on rated load (JEDEC method) V R = V RRM T J = 125 OC Typical Thermal Resistance (Note 2) ΘJA Diode junction capacitance f=1MHz R and applied 4V DC reverse voltage Typical Junction Capacitance (Note 1) CJ Storage temperature -55 to +125 Operating Temperature Range TJ Maximum RMS Voltage Forward rectified current Maximum DC Blocking Voltage 40 Storage Temperature Range 60 Symbol 42 I 60O 18 10 otherwise noted) 115 80 100 150 TYP. MAX. UNIT MIN. 56 70 105 1.0 A 80 100 150 I FSM1.0 30 IR T 40 CJ 120 STG 30 120 200 Volts 140 Volts 200 Volts Amp A 5.0 -55 Amp μA 50 ℃/W pF 15 O +150 -55 to +150 PF C ℃ - 65 to +175 TSTG ℃ CHARACTERISTICS *1 Maximum Forward Voltage V *2 V at 1.0A DC SYMBOLS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT *3 VR (V) (V) Current(V) Maximum Average Reverse at @T A=25℃ RRM Rated DC Blocking Voltage FM4001L 50 FM4002L NOTES: 100 RMS 35 @T A=125℃ 50 70 VVFF*4 (V) IR Operating temperature0.50 T J, ( OC) 100 FM4005L 600 420 600 FM4006L 800 560 800 FM4007L 1000 700 1000 2012-06 201- 1.10 0.85 0.9 0.5 0.92 Volts 10 peak reverse voltage *1 Repetitive mAm *2 RMS voltage FM4003L 140 voltage200 1- Measured at 1 MHZ and200 applied reverse of 4.0 VDC. 400 280 FM4004L 2- Thermal Resistance From Junction to Ambient 400 0.70 -55 to +150 *3 Continuous reverse voltage *4 Maximum forward voltage@I F =1.0A WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. FM120-M+ FM4001L WILLAS THRU THRU 1.0A GENERAL PURPOSE RECTIFIERS - 50V- 1000V 1.0A SURFACE MOUNT SCHOTTKY BARRIER SMA-LRECTIFIERS PACKAGE-20V- 200V FM1200-M+ FM4007L Pb Free Product SOD-123+ PACKAGE Rating and characteristicPackage curves outline Features process design, excellent power dissipation offers • BatchFIG.1-TYPICAL FORWARD better reverse leakage current and thermal resistance. CHARACTERISTICS mounted application in order to • Low profile surface AVERAGE FORWARD CURRENT,(A) optimize board space. INSTANTANEOUS FORWARD CURRENT,(A) • Low 50 power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. for overvoltage protection. • Guardring 10 • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. 3.0 parts meet environmental standards of • Lead-free MIL-STD-19500 /228 • RoHS 1.0 product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data SOD-123H FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 1.2 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 1.0 0.8 0.071(1.8) 0.056(1.4) 0.6 P.C.B. Mounted on 0.2" x 0.2" (5 mm x 5 mm) Copper Pad Areas 0.4 0.2 0 0 20 40 TJ=25 C 60 80 100 120 140 160 LEAD TEMPERATURE ( C) Pulse Width 300us retardant • Epoxy : UL94-V0 rated flame1% Duty Cycle 0.1 : Molded plastic, SOD-123H • Case , • Terminals :Plated terminals, solderable per MIL-STD-750 180 200 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT • Polarity : Indicated by cathode band .01 .6 .7 .8 : Any .9 1.0 1.1 1.2 Position • Mounting FORWARD VOLTAGE,(V) • Weight : Approximated 0.011 gram 1.3 PEAK FORWAARD SURGE CURRENT,(A) Method 2026 50 Dimensions in inches and (millimeters) 40 30 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FIG.3 - TYPICAL REVERSE RATINGS Marking Code VRRM 12 20 Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current IO IFSM REVERSE LEAKAGE CURRENT, (m A) 100 Maximum Recurrent Peak Reverse Voltage CHARACTERISTICS 10 Peak Forward Surge Current 8.3 ms single half sine-wave TJ=125 C superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) CJ Typical Junction 1.0 Capacitance (Note 1) TJ Operating Temperature Range Storage Temperature Range .1 TSTG T =25 C CHARACTERISTICS VF Maximum Average Reverse Current at @T A=25℃ NOTES: .01 0 @T A=125℃ 10 130 13 14 40 15 505 14 21 28 NUMBER OF CYCLES AT 60Hz 35 42 56 20 30 40 50 0 30 40 60 80 16 10 60 18 80 60 80 10 50 100 100 150 115 120 200 Volt 70 105 140 Volt 100 150 200 Volt 1.0 FIG.5-TYPICAL JUNCTION CAPACITANCE 30 35 -55 to +125 Am ℃/W PF -55 to +150 20 Am 40 120 25 ℃ - 65 to +175 ℃ 15 IR 0.50 10 0.70 0.9 0.85 0.5 5 0 20 0.92 mAm 10 .01 .05 .1 .5 1 Vol 5 10 50 100 100 120 140 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. PERCENTAGE RATED PEAK REVERSE VOLTAGE JEDEC method SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI J Maximum Forward Voltage at 1.0A DC Rated DC Blocking Voltage Sine Wave 20 SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN JUNCTION CAPACITANCE,(pF) Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% 8.3ms Single Half TJ=25 C REVERSE VOLTAGE,(V) 2- Thermal Resistance From Junction to Ambient 2012-06 201- WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. FM120-M+ FM4001L WILLAS THRU THRU 1.0A GENERAL PURPOSE RECTIFIERS - 50V- 1000V 1.0A SURFACE MOUNT SCHOTTKY BARRIER SMA-LRECTIFIERS PACKAGE-20V- 200V FM1200-M+ FM4007L Pb Free Product SOD-123+ PACKAGE Package outline Features Pinning information design, excellent power dissipation offers • Batch process better reverse leakage current and thermal resistance. SOD-123H surface mounted application in order to • Low profile Pin Simplified outline optimize board space. • Low power loss, high efficiency. High current capability, low forward voltage drop. •Pin1 cathode High surge capability. •Pin2 1 anode • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of ReelMIL-STD-19500 packing /228 • RoHS product for packing code suffix "G" COMPONENT Halogen freeSIZE product for packing SPACING code suffix "H" BOX PACKAGE REEL REEL (pcs) Mechanical data (m/m) Symbol 0.146(3.7) 0.130(3.3) 2 0.012(0.3) Typ. 1 2 0.071(1.8) 0.056(1.4) INNER BOX (m/m) (pcs) REEL DIA, (m/m) CARTON SIZE (m/m) CARTON (pcs) rated flame retardant • Epoxy : UL94-V0 4.0 2,000 SMA-L 7" 20,000 183*170*183 178 382*356*387 160,000 SOD-123H4.0 • Case : Molded 13" plastic, 7,500 SMA-L 15,000 337*337*37 330 0.031(0.8)350*330*360 Typ. 120,000 • Terminals :Plated terminals, solderable per MIL-STD-750 , APPROX. GROSS WEIGHT (kg) 0.040(1.0) 0.024(0.6) 15.5 14.2 Typ. 0.031(0.8) Method 2026 Marking • Polarity : Indicated by cathode band Dimensions in inches and (millimeters) Mounting Position : Any •Type number • Weight : Approximated 0.011 gram Marking code FM4001L A1 FM4002L A2 CHARACTERISTICS MAXIMUM RATINGS AND ELECTRICAL FM4003L A3 Ratings at 25℃ ambient temperature unless otherwise specified. Single phaseFM4004L half wave, 60Hz, resistive of inductive load. A4 For capacitive load, derate current by 20% FM4005L A5 SYMBOL FM120-MH RATINGS FM4006L A6 FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN Marking CodeFM4007L 12 13 14 15 16 18 10 115 120 A7 VRRM Maximum Recurrent Peak Reverse Voltage Pb-Free package Maximum RMS Voltage 20 is available VRMS 14 Maximum DC Blocking Voltage VDC ”G” 20 RoHS product for packing code suffix 30 40 50 60 80 100 150 200 Volt 21 28 35 42 56 70 105 140 Volt 30 40 50 60 80 100 150 200 Volt IO Halogen free product for packing code suffix “H” 1.0 30 Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave IFSM superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1)pad Suggested solder Operating Temperature Range layout Storage Temperature Range CJ -55 to +125 TJ ℃/W PF -55 to +150 ℃ ℃ C SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ A Rated DC Blocking Voltage Am - 65 to +175 TSTG CHARACTERISTICS 40 120 Am 0.50 0.70 0.5 IR @T A=125℃ 0.85 0.9 0.92 Vol 10 mAm NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. B 2- Thermal Resistance From Junction to Ambient Dimensions in inches and (millimeters) 2012-06 201- PACKAGE A B C SMA-L 0.110 (2.80) 0.059 (1.50) 0.110 (2.80) WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. FM120-M+ FM4001L WILLAS THRU THRU 1.0A GENERAL PURPOSE RECTIFIERS - 50V- 1000V 1.0A SURFACE MOUNT SCHOTTKY BARRIER SMA-LRECTIFIERS PACKAGE-20V- 200V FM1200-M+ FM4007L Pb Free Product SOD-123+ PACKAGE Package outline Features Packing information • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to P0 optimize board space. • Low power loss, high efficiency. P1 • High current capability, low forward voltage drop. d • High surge capability. • Guardring for overvoltage protection. E • Ultra high-speed switching. F• Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of • 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) W B MIL-STD-19500 /228 RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data 0.040(1.0) 0.024(0.6) rated flame retardant • Epoxy : UL94-V0 A P • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) D2 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS D1 T Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS C W1 D FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 Maximum RMS Voltage VRMS 14 21 28 35 42 Maximum DC Blocking Voltage VDC 20 30 40 50 Maximum Average Forward Rectified Current Item Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO IFSM Symbol Tolerance 18 80 56 unit:mm 60 80 1.0 SMA-L 30 115 150 120 200 Vol 70 105 140 Vol 100 150 200 Vol Am Am 2.90 A 0.1 40 RΘJA 5.50 Carrier length B 0.1 120 Typical Junction Capacitance (Note 1) CJ Carrier depth C -55 to +125 0.1 2.10 -55 to +150 Operating Temperature Range TJ 1.50 Sprocket hole d 0.1 65 to +175 Storage Temperature Range TSTG 330.00 13" Reel outside diameter D 2.0 50.00 13" Reel inner diameter D1 min CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH 178.00 7" Reel outside diameter D 2.0 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 62.00 7" Reel inner diameter D1 min 0.5 Maximum Average Reverse Current at hole @T A=25℃ 13.00 Feed diameter 0.5 D2 IR 10 @T hole A=125℃ Rated DC Blocking Voltage 1.75 Sprocket position E 0.1 5.50 Punch hole position F 0.1 NOTES: 4.00 Punch hole pitch P 0.1 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 4.00 P0 0.1 Sprocket hole pitch 2- Thermal Resistance From Junction to Ambient 2.00 0.1 Embossment center P1 0.23 Overall tape thickness T 0.1 12.00 W 0.3 Tape width 18.00 Reel width W1 1.0 width Typical Thermal Resistance (Note Carrier 2) 10 100 ℃/W PF ℃ ℃ UN Vol mAm Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2012-06 201- WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ FM4001L THRUTHRU 1.0A GENERAL PURPOSE RECTIFIERS - 50V- 1000V FM1200-M+ FM4007L 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-L PACKAGE SOD-123+ PACKAGE Pb Free Product Package outline Features Batch process Information: design, excellent power dissipation offers • Ordering better reverse leakage current and thermal resistance. Device PNapplication in order to mounted • Low profile surface optimize board space. SOD-123H Packing Tape & 7”Reel Packing :2000pcs/Reel 0.146(3.7) 0.130(3.3) Tape & 13”Reel Packing :7500pcs/Reel T high efficiency. • Low power Partloss, Number -T(1)G(2)-WS 0.012(0.3) Typ. • High current capability, low forward voltage drop. W • High surge capability. 1. for Packing code, T:protection. Tape & 7” Reel Packing; W: Tape & 13” Reel Packing Guardring overvoltage • Note: 0.071(1.8) switching. • Ultra high-speed 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" .0.056(1.4) • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band ***Disclaimer*** • Mounting Position : Any • Weight : Approximated 0.011 gram WILLAS reserves the right to make changes without notice to any product specification to AND makeELECTRICAL corrections, CHARACTERISTICS modifications, enhancements or other MAXIMUMherein, RATINGS Ratings at 25℃ ambientWILLAS temperature otherwise changes. orunless anyone on itsspecified. behalf assumes no responsibility or liability Single phase half wave, 60Hz, resistive of inductive load. for any errors or inaccuracies. Data sheet specifications and its information For capacitive load, derate current by 20% contained are intended to provide product description "Typical" parameters FM130-MH FM140-MH only. FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT SYMBOLaFM120-MH RATINGS Marking Codewhich may be included on WILLAS data 12sheets 13 and/ 14 15 16 18 10 115 120 or specifications can 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage Volts VRRM and do vary in different applications and vary over Volts 14 actual 21 performance 28 35 may 42 56 time.70 105 140 Maximum RMS Voltage VRMS Volts Maximum DCWILLAS Blocking Voltage 20 30 of the 40 application 50 60or 80 100 150 200 VDC does not assume any liability arising out Amps Maximum Average Forward Rectified Current 1.0 use of any product or circuit. IO Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 30 Amps WILLAS products Typical Thermal Resistance (Note 2) are not designed, medical, authorized for use in40 ℃/W RΘJA intended or PF 120 Typical Junction Capacitance (Note 1) C J life-saving implant or other applications intended for life-sustaining or other related -55 to +125 -55 to +150 Operating Temperature Range TJ ℃ applications malfunction of component or circuitry - 65 tomay +175 directly Storage Temperature Range where a failure orTSTG ℃ or indirectly cause injury or threaten a life without expressed written approval CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT of WILLAS. using or Vselling WILLAS components for0.70 use in Volts 0.9 Maximum Forward Voltage at Customers 1.0A DC 0.92 F 0.50 0.85 0.5 Maximum Average Reverse Current at @T A=25℃ such applications do so at theirIRown risk and shall agree to fully indemnify WILLAS mAmps 10 @T A=125℃ Rated DC Blocking Voltage Inc and its subsidiaries harmless against all claims, damages and expenditures. NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 201- WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.