1 2 FRONT VIEW 3 BRANCH D 4 5 76,2 (3") Disclosure and photocopying of this document, exploitation and communication of its contents are not permitted, unless permission is expressly granted. All rights are reserved. A BRANCH B BRANCH A BRANCH C BRANCH PHASE A B C D E F L1-L2 L2-L3 L3-L1 L1-L2 L2-L3 L3-L1 440 17,3" 465,9 18,3" 482,6 19,0" B REAR VIEW 7 8 OUTPUT POWER BRANCH F BRANCH E 6 RECEPTACLE TYPE (QUANTITY) 1xC13, 2xC19 1xC13, 2xC19 2xC19 1xC13, 2xC19 1xC13, 2xC19 2xC19 VOLTAGE (V) 200-240 200-240 200-240 200-240 200-240 200-240 MAX. CONTINUOUS AMPS (A) PER RECEPTACLE PER BRANCH 12/16 16 12/16 16 16 16 12/16 16 12/16 16 16 16 B METERING PARAMETER MEASUREMENT ACCURACY EXTERNAL EARTH GROUND CONNECTION HORIZONTAL MOUNTING BRACKET A VOLTAGE ±1 % + 0.1 VAC CURRENT ±1.5 % + 0.01 A FROM 1 % TO 10 % OF UNIT RATING; ±1 % FROM >10 % TO 125 % OF UNIT RATING 88 (3,5") INPUT POWER C INPUT CORD INPUT PLUG 10 ft / 3 m IEC 60309 UPPER VIEW WIRE COUNT FREQUENCY (Hz) 3/PE 50/60 VOLTAGE (V) RATED AMPS (A) MAX. CONT. AMPS (A) 200-240 60 48 IEC 60309 (60 A, 3/PE, 200-240 V, BLUE 9H) AGENCY COMPLIANCE: - UL certification: UL 60950-1 (2nd), CSA C22.2 No. 60950-1-07 - CE-mark: LVD, EMC, RoHS (incl. harmonized standards hereunder) - CB certification: IEC 60950-1 (2nd) - BG certification: BV-BG (factory inspected) - WEEE COMPLIANT D C D 250 9,8" ENVIRONMENTAL RATING: OPERATING TEMPERATURE: 5 °C - 60 °C (41 °F - 140 °F) NON-CONDENSING, NON-CORROSIVE, 10 % - 90 % RH STORAGE TEMPERATURE: -20 °C - 85 °C (-4 °F - 185 °F) MAX. OPERATING ALTITUDE: 2000 m NOTES: 1. UNIT DIMENSIONS: 440 mm (17.3") W x 250 mm (9.8") D x 88 mm (3.5") H 2. UNIT WEIGHT: 8 kg / 17,6 lbs 3. SHIPPING DIMENSIONS: 585 mm (23") W x 405 mm (15.9") D x 270 mm (10.6") H 4. SHIPPING WEIGHT: 8,5 kg / 18,7 lbs 5. (2) MOUNTING BRACKETS SUPPLIED WITH EACH UNIT. BOTH SIDES CAN BE USED TO MOUNT THE PDU. Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Alle Rechte vorbehalten. E Allgemeintoleranzen General tolerances Dimensions in mm Drawn Checked Approved Date 04/05/16 04/05/16 - Oberfläche Finish Gewicht: Weight: Werkstoff / Material Name Racek Votýpka - Bezeichnung / Description MPH2-NRC_3P4W-60A_4N-12O Input and Branch Metered + Outlet Metered/Switched Zeichnungs-Nr. / Drawing no. MPHR6325 F INPUT POWER CORD 1 2 RoHS COMPLIANT 3 4 Rev. - - - Change Date Name - Maßstab Scale 1:5 Blatt/Sheet Verwendet in / Used in - 1/1