1 FRONT VIEW 2 BRANCH D BRANCH E 3 BRANCH F 4 BRANCH D 5 76,2 (3") Disclosure and photocopying of this document, exploitation and communication of its contents are not permitted, unless permission is expressly granted. All rights are reserved. B REAR VIEW EXTERNAL EARTH GROUND CONNECTION BRANCH A 7 8 OUTPUT POWER BRANCH E BRANCH F A BRANCH A BRANCH B BRANCH C 440 17,3" 465,9 18,3" 482,6 19,0" 6 BRANCH B BRANCH C BRANCH PHASE A B C D E F L1 L2 L3 L1 L2 L3 RECEPTACLE TYPE (QUANTITY) 3xC13 3xC13 3xC13 3xC13 3xC13 3xC13 MAX. CONTINUOUS AMPS (A) PER RECEPTACLE PER BRANCH 12 16 12 16 12 16 12 16 12 16 12 16 VOLTAGE (V) 200-240 200-240 200-240 200-240 200-240 200-240 B METERING PARAMETER MEASUREMENT ACCURACY VOLTAGE ±1 % + 0.1 VAC CURRENT ±1.5 % + 0.01 A FROM 1 % TO 10 % OF UNIT RATING; ±1 % FROM >10 % TO 125 % OF UNIT RATING HORIZONTAL MOUNTING BRACKET A INPUT POWER INPUT CORD INPUT PLUG WIRE COUNT FREQUENCY (Hz) 88 (3,5") C 10 ft / 3 m NEMA L22-30P UPPER VIEW 3/N/PE 50/60 VOLTAGE (V) MAX. CONT. AMPS (A) 30 24 200-240/346-415 C NEMA L22-30P (30 A, 3/N/PE, 200-240/346-415 V) AGENCY COMPLIANCE: - UL certification: UL 60950-1 (2nd), CSA C22.2 No. 60950-1-07 - CE-mark: LVD, EMC, RoHS (incl. harmonized standards hereunder) - CB certification: IEC 60950-1 (2nd) - BG certification: BV-BG (factory inspected) - WEEE COMPLIANT D RATED AMPS (A) D 250 9,8" ENVIRONMENTAL RATING: OPERATING TEMPERATURE: 5 °C - 60 °C (41 °F - 140 °F) NON-CONDENSING, NON-CORROSIVE, 10 % - 90 % RH STORAGE TEMPERATURE: -20 °C - 85 °C (-4 °F - 185 °F) MAX. OPERATING ALTITUDE: 2000 m Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Alle Rechte vorbehalten. E NOTES: 1. UNIT DIMENSIONS: 440 mm (17.3") W x 250 mm (9.8") D x 88 mm (3.5") H 2. UNIT WEIGHT: 8 kg / 17,6 lbs 3. SHIPPING DIMENSIONS: 585 mm (23") W x 405 mm (15.9") D x 270 mm (10.6") H 4. SHIPPING WEIGHT: 8,5 kg / 18,7 lbs 5. (2) MOUNTING BRACKETS SUPPLIED WITH EACH UNIT. BOTH SIDES CAN BE USED TO MOUNT THE PDU. Allgemeintoleranzen General tolerances Dimensions in mm Drawn Checked Approved Date 21/04/16 21/04/16 - Oberfläche Finish Gewicht: Weight: Werkstoff / Material Name Racek Votýpka - Bezeichnung / Description MPH2-NRC_L22-30P_18N Input and Branch Metered + Outlet Metered/Switched Zeichnungs-Nr. / Drawing no. MPHR6131 F INPUT POWER CORD 1 2 RoHS COMPLIANT 3 4 Rev. - - - Change Date Name - Maßstab Scale 1:5 Blatt/Sheet Verwendet in / Used in - 1/1