TECHNICAL CHARACTERISTICS 11,00 ±0.3 6,60 ±0.20 1,10 MATERIAL >Cover: PPS UL 94V-0, color Black >Base: PPS UL 94V-0, color Black >Actuator: PA 46 UL HB, color White >Tape: Polyimide Film >Contact: Gold Plated >Terminal: Gold Plated 1,40 ±0.03 0,60 ±0.03 0,25 ±0.02 8,4 ±0,2 SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air 3 cycles max. >Keep in "off" position during soldering >For cleaning or washing only with top tape sealed >VPH Heating Process only with top tape sealed 6,00 ±0.10 h 0,10 Ref. 7,62 ±0.20 9,70 ±0.3 WASHABLE DEFINITION Please do not submerse washable products into water or cleaning agents or put them in locations exposed to water or liquids completely. When cleaning by hand (brushing), please do not use excessive force on our switch to avoid malfunction afterwards, because you could deform function relevant areas or you could damage sealing functions. Do not clean washable series immediately after soldering. The cleaning agent may be absorbed into the switch through respiration while the switch cools. Wiring Diagram 0,40 3,20 ±0.10 0,50 ±0,10 2,54 ±0.03 2,54 ±0.03 SPECIFICATION >Contact Rating: Switching: 25mA, 24VDC Non-Switching: 100mA, 50VDC >Contact Resistance: Initial: 50mOHM max. After Life Test: 100mOHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 500VAC for 1 minute >Operating Force: 1000g max. >Mechanical Life: min. 5000 cycles >Electrical Life: 2000 cycles / 25mA, 24VDC >Flat Actuator with top tape sealed ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach 0,9 Travel A u0.2 PACKAGING INFORMATION >Tape & Reel packaging >On delivery in "off" position Pole 1 please refer separateness specification. DIMENSION Pole 1 please refer separateness specification. This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Projection f e d c In addition, even electronic component in general electronic equipments, b when used in electrical circuits that require high safety, reliability functions a or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV Scale - 2:1 GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 No.Of Pole Dim. A (mm) No.Of Pole Dim. A (mm) 2 5.52 7 18.22 3 8.06 8 20.76 4 10.60 9 23.30 5 13.14 10 25.84 6 15.68 12 30.92 Basic material DESCRIPTION Date Name Drawn 09-02-24 Jelisarow WS-DISV, SMD version Pole 1 seperate 14-02-25 DaF Checked 09-02-26 Hsu Mei-Ting flat actuator with top tape sealed specification Washable Definition 14-02-24 DaF dimension 8,4+/-0,2 14-01-31 DaF 2:1 Position Scale WE Würth Elektronik warning text 11-10-26 WJ eiCan eiCan CAD Drawing.- No. 4181211608xx Actuator: HB was 94V-0 11-08-26 WJ Revised MatchCode 14-07-23 AL FILE DATE BY EDV NO 4181211608xx.dft System :Solid Edge V20 SIZE A4