1/5 Polarization Beam Combiner Fujikura Polarization Beam Combiners are produced by Fujikura fused taper technology. Fujikura PBC are qualified with Telcordia GR-1221-CORE and GR-1209-CORE. Features Applications Low Insertion loss Pump LDs for combining High combining efficiency in EDFA and Raman Amp. Raman Amp. Available products: Product Name Part # 980 nm PBC PMX-9801-2-B 1480 nm PBC PMX-1401-2-B Specifications subject to change without prior notice Optical Device Sales Engineering Department 1440, Mutsuzaki, Sakura, Chiba 285-8550, Japan Tel: +81 43 484 0982 FAX: +81 43 484 2186 http://www.fujikura.co.jp/ [email protected] 2/5 STANDARD SPECIFICATION FOR Polarization Beam Combiner at 980nm (P PMX-9801-2-B) 1. General This specification covers 980nm Polarization Beam Combiner. Part number : PMX-9801-2-B 2. Configuration slow fast slow Slow-Axis Port 3 Input Port 1 Slow +Fast Port 4 Port 2 Fast-Axis fast Input axis > 160cm 70 +/- 2mm Port 1 Red <15cm Yellow Port 3 Serial Number Blue Port 2 4 +/- 0.2mm Port 4 2x2 configuration of PMX B-13D0103 3/5 Termination of Port 4 Pigtail length of Port4 is >2.1m including ~1m core-less fiber. Pigtail fiber and core-less fiber except near splice point must be indicated by green ink. 3. Specifications Item Unit Specification Operating wavelength nm 975.0 to 985.0 dB dB < 0.3 < 0.8 Measured at room temperature. Return loss * dB > 40 1, 2 Max. power handling W 1 Insertion loss 1 -> 3 (slow) 2 -> 3 (fast) Remark Operating temperature °C 0 to 70 Storage temperature °C -40 to 85 * Design guaranteed (with termination fiber spliced on P4) Fiber type Fujikura PANDA fiber for 980 nm (Input&Output) Port configuration Package dimensions (Diameter x Length) Standard fiber length - with termination fiber mm φ 4 x L 70 m >1.6 1, 2, 3 4. Test Report The results corresponding to Clause 3 shall be recorded by Fujikura in the test report. 4-1 Serial number 4-2 Insertion Loss <End of Specification> Specifications subject to change without prior notice Optical Device Sales Engineering Department 1440, Mutsuzaki, Sakura, Chiba 285-8550, Japan Tel: +81 43 484 0982 FAX: +81 43 484 2186 http://www.fujikura.co.jp/ [email protected] B-13D0103 4/5 STANDARD SPECIFICATION FOR Polarization Beam Combiner at 1480nm (P PMX-1401-2-B) 1. General This specification covers 1480nm Polarization Beam Combiner. Part number : PMX-1401-2-B 2. Configuration slow slow fast Slow-Axis Port 3 Input Port 1 Slow +Fast Port 4 Port 2 Fast-Axis fast Input axis > 100cm Port 1 Red <= 65 Blue Port 3 Serial Number Black Port 2 Port 4 <= 3.4 2x2 configuration of PMX B-13D0103 5/5 Termination of Port 4 Pigtail length of Port4 is between 1.5m and 2.5m including 1m core-less fiber. 3. Specifications Table1 Specifications Item Unit Specification Operating wavelength nm 1480 10 1 -> 3 (SLOW) dB < 0.4 2 -> 3 (FAST) dB < 0.8 Return loss(2) dB 50 Max. Power handling W 1 Operating Temperature C 0 to 70 Storage Temperature C -40 to 85 Fiber Type (input output) - Fujikura PANDA fiber for 1480nm Port Configuration - with termination fiber Package Dimensions (Diameter X Length) mm 3.2 x L 65 Standard Lead Fiber length m >1 Insertion Loss(1) 1. Measured at room temperature 2. Measured with 2 x 2 configuration with termination fiber spliced on P4 4. Test Report The results corresponding to Clause 3 shall be recorded by Fujikura in the test report. 4-1 Serial number 4-2 Insertion Loss <End of Specification> Specifications subject to change without prior notice Optical Device Sales Engineering Department 1440, Mutsuzaki, Sakura, Chiba 285-8550, Japan Tel: +81 43 484 0982 FAX: +81 43 484 2186 http://www.fujikura.co.jp/ [email protected] B-13D0103