1/5 偏波ビームコンバイナ フジクラの偏波ビームコンバイナはフジクラの溶融延伸技術を用いて製造されております。フジクラの 偏波ビームコンバイナはTelcordia GR-1221-COREとGR-1209-COREに適合しております。 特徴 アプリケーション 低挿入損失 EDFAや偏波保持EDFAの励起LD結合用途 高結合効率 偏波保持型EDFA ラマン励起用途 製品リスト 製品名 型番 980 nm 偏波ビームコンバイナ PMX-9801-2-B 1480 nm 偏波ビームコンバイナ PMX-1401-2-B 仕様は予告なく変更されることがあります。 株式会社フジクラ 光事業部 千葉県佐倉市六崎 1440 Tel: 043-484-0982 FAX: 043-484 -2186 http://www.fujikura.co.jp/ [email protected] 2/5 STANDARD SPECIFICATION FOR Polarization Beam Combiner at 980nm (P PMX-9801-2-B) 1. General This specification covers 980nm Polarization Beam Combiner. Part number : PMX-9801-2-B 2. Configuration slow fast slow Slow-Axis Port 3 Input Port 1 Slow +Fast Port 4 Port 2 Fast-Axis fast Input axis > 160cm 70 +/- 2mm Port 1 Red <15cm Yellow Port 3 Serial Number Blue Port 2 4 +/- 0.2mm Port 4 2x2 configuration of PMX B-13D0103 3/5 Termination of Port 4 Pigtail length of Port4 is >2.1m including ~1m core-less fiber. Pigtail fiber and core-less fiber except near splice point must be indicated by green ink. 3. Specifications Item Unit Specification Operating wavelength nm 975.0 to 985.0 dB dB < 0.3 < 0.8 Measured at room temperature. Return loss * dB > 40 1, 2 Max. power handling W 1 Insertion loss 1 -> 3 (slow) 2 -> 3 (fast) Remark Operating temperature °C 0 to 70 Storage temperature °C -40 to 85 * Design guaranteed (with termination fiber spliced on P4) Fiber type Fujikura PANDA fiber for 980 nm (Input&Output) Port configuration Package dimensions (Diameter x Length) Standard fiber length - with termination fiber mm φ 4 x L 70 m >1.6 1, 2, 3 4. Test Report The results corresponding to Clause 3 shall be recorded by Fujikura in the test report. 4-1 Serial number 4-2 Insertion Loss <End of Specification> Specifications subject to change without prior notice Optical Device Sales Engineering Department 1440, Mutsuzaki, Sakura, Chiba 285-8550, Japan Tel: +81 43 484 0982 FAX: +81 43 484 2186 http://www.fujikura.co.jp/ [email protected] B-13D0103 4/5 STANDARD SPECIFICATION FOR Polarization Beam Combiner at 1480nm (P PMX-1401-2-B) 1. General This specification covers 1480nm Polarization Beam Combiner. Part number : PMX-1401-2-B 2. Configuration slow slow fast Slow-Axis Port 3 Input Port 1 Slow +Fast Port 4 Port 2 Fast-Axis fast Input axis > 100cm Port 1 Red <= 65 Blue Port 3 Serial Number Black Port 2 Port 4 <= 3.4 2x2 configuration of PMX B-13D0103 5/5 Termination of Port 4 Pigtail length of Port4 is between 1.5m and 2.5m including 1m core-less fiber. 3. Specifications Table1 Specifications Item Unit Specification Operating wavelength nm 1480 10 1 -> 3 (SLOW) dB < 0.4 2 -> 3 (FAST) dB < 0.8 Return loss(2) dB 50 Max. Power handling W 1 Operating Temperature C 0 to 70 Storage Temperature C -40 to 85 Fiber Type (input output) - Fujikura PANDA fiber for 1480nm Port Configuration - with termination fiber Package Dimensions (Diameter X Length) mm 3.2 x L 65 Standard Lead Fiber length m >1 Insertion Loss(1) 1. Measured at room temperature 2. Measured with 2 x 2 configuration with termination fiber spliced on P4 4. Test Report The results corresponding to Clause 3 shall be recorded by Fujikura in the test report. 4-1 Serial number 4-2 Insertion Loss <End of Specification> Specifications subject to change without prior notice Optical Device Sales Engineering Department 1440, Mutsuzaki, Sakura, Chiba 285-8550, Japan Tel: +81 43 484 0982 FAX: +81 43 484 2186 http://www.fujikura.co.jp/ [email protected] B-13D0103