SPECIFICATION 7,62 P.C.B Layout 2,54 2,54 O 0,8 >Contact Rating Switching : 25mA, 24VDC Non-Switching : 100mA, 50VDC >Contact Resistance Initial: 50mΩ max. After life test : 100mΩ max. >Insulation Resistance : min. 100MΩ at 500VDC >Dielectric Strength : 500VAC for 1 minute >Operation Force : 600g max. >Mechanical Life : 2000 cycles >Electrical Life : 2000 cycles / 25mA, 24VDC >Flat Actuator with top tape sealed MATERIAL >Cover : >Base : >Actuator : >Tape : >Contact : >Terminal : Wiring Diagram 3,5 3,5 3,0 A PA9T UL 94 V-0, color Black PA9T UL 94 V-0, color Black PA66 UL 94 V-0, color White Polyimide Film Gold Plated Gold Plated SOLDERING INFORMATION 0,5 x 0,25 >Terminal in THT version >Wave soldering 260°C 10sec. max >Hand soldering with 30W or under at 350°C for 3 sec. max >Keep in “off” position during soldering >Ultrasonic cleaning only with top tape sealed >Any inflow of Flux into the switch may influence the contact function 7,62 ±0,5 ENVIRONMENTAL 6,2 ±0,1 1,8 Storage condition : Operation condition : Compliance : -40°C ~ +85°C -40°C ~ +85°C Lead Free , ROHS , Reach PACKAGING INFORMATION >Tube >On delivery in “off” position DIMENSION Scale - 2:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 REV. FILE DATE BY www.we-online.de [email protected] CREATED DaF No. of Poles Dim. A (mm) No. of Poles Dim. A (mm) 1 3.48 7 18.72 CHECKED JLi 2 6.02 3 8.56 8 21.26 4 11.10 9 23.80 GENERAL TOLERANCE DIN ISO 2768-1m DESCRIPTION 5 13.64 10 26.34 PROJECTION METHOD SCALE 2:1 TECHNICAL REFERENCE _________ WS-DITV THT version flat actuator with top tape sealed ORDER CODE SIZE STATUS DATE Released 2015-05-19 IC type 6 16.18 12 31.42 418 127 160 9xx BUSINESS UNIT Switch PAGE 1 /1 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.