0,4 ±0,1 3 1 2,1 ±0,1 2,5 ±0,1 4 2 0,5 ±0,1 0,6 ±0,1 TECHNICAL CHARACTERISTICS 1 2 3 4 2,2 ±0,1 4,5 ±0,1 100mΩ max. 1Ω max. min. 100MΩ at 500VDC 250VAC for 1 minute 0.15±0.1mm 10ms max. MATERIAL >Cover : >Stem : >Frame : >Contact : >Terminal : >Tape : Stainless Steel LCP UL 94 V-0 PA46 UL HB, color Black Stainless Steel with Silver Copper Alloy with Silver Polyimide tape 50mA, 12VDC +0,2 -0,1 1,7 0,6 1,4±0,1 P.C.B MOUNTING PLAN SPECIFICATION >Rating : >Contact Resistance : Initial : After Life Test : >Insulation Resistance : >Dielectric Strength : >Stroke : >Bounce : 1 3 2 4 SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3sec. max 3,5 +0,0 4,3 -0,5 ENVIRONMENTAL Storage condition : Operation condition : Compliance : SCHEMATIC -40°C ~ +85°C -40°C ~ +85°C Lead Free , ROHS , Reach 2,9 1,5 O 1,8 PACKAGING INFORMATION >Tape & Reel Part number Force Color of Stem Life cycle 434 153 017 835 350g ±50gf Blue 200.000 2,2 Scale - 8:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 a REV. change articlenumber 434 153 017 836 FILE 2015-04-20 DATE DaF BY www.we-online.de [email protected] CREATED DaF CHECKED JLi GENERAL TOLERANCE DIN ISO 2768-1m DESCRIPTION PROJECTION METHOD SCALE 8:1 TECHNICAL REFERENCE _________ WS-TASV Tact Switch J-Bend SMD version ORDER CODE SIZE STATUS DATE 3.5x2.9x1.7mm Released 2014-11-20 434153017835 BUSINESS UNIT eiSos PAGE 1 /1 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.