SMB

MSMBG5.0A – MXLSMBG170CAe3,
MSMBJ5.0A – MXLSMBJ170CAe3
Screening in
reference to
MIL-PRF-19500
available
600 Watt Surface Mount
Transient Voltage Suppressor
Available
DESCRIPTION
The MSMB 5.0A – MSMB 170CA series of surface mount 600 watt transient voltage suppressors
provide a selection of standoff voltages (Vwm) from 5.0 to 170 V. These high-reliability devices are
available in either unidirectional or bidirectional versions. The SMBG Gull-wing design in the DO215AA package is ideal for visible solder connections. The SMBJ J-bend design in the DO214AA package allows for greater PC board mounting density. It is available with SnPb or
RoHS compliant matte-tin plating.
DO-215AA
Gull-wing Package
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
•
•
•
•
•
High reliability devices with wafer fabrication and assembly lot traceability.
All devices 100% surge tested.
Enhanced reliability screening in reference to MIL-PRF-19500 is also available.
Refer to High Reliability Up-Screened Plastic Products Portfolio for more details on the screening
options.
(See part nomenclature for all options.)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B.
3σ lot norm screening performed on standby current (I D ).
RoHS compliant versions available.
APPLICATIONS / BENEFITS
•
•
•
•
•
DO-214AA
J-bend Package
NOTE: All SMB series are
equivalent to prior SMS package
identifications.
Protects sensitive components such as IC’s, CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.
Protection from switching transients & RF induced voltage pulses.
Also available in:
Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4.
Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:
Class 1: MSB 5.0A to MSMB 120CA
Class 2: MSMB 5.0A to MSMB 60CA
Class 3: MSMB 5.0A to MSMB 30CA
Class 4: MSMB 5.0A to MSMB 15CA
Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:
Class 1: MSMB 5.0A to MSMB 36CA
Class 2: MSMB 5.0A to MSMB 18CA
Commercial Grade
SMBJ5.0A – SMBJ170CAe3
T-18 package
(axial-leaded)
P6KE6.8A – P6KE200CAe3
MAXIMUM RATINGS @ 25 ºC unless otherwise stated
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance, Junction to Lead
(1)
Thermal Resistance, Junction to Ambient
(2)
Peak Pulse Power Dissipation
10/1000us
(1)
Rated Average Power Dissipation
@ TL < 25 ºC
@ TA = 25 ºC
Unidirectional
Tclamping (0 volts to V (BR) min)
Bidirectional
(3)
Forward Surge Current
Solder Temperature @ 10 s
Symbol
Value
TJ and
TSTG
R ӨJL
R ӨJA
P PP
P M(AV)
-65 to +150
I FS
TSP
25
90
600
5
1.38
< 100
<5
100
260
Unit
o
C
o
C/W
C/W
W
W
o
ps
ns
A (pk)
o
C
Notes: 1. When mounted on FR4 PC board (1oz Cu) with recommended footprint (see pad layout on last page).
2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 4).
3. Peak impulse of 8.3 ms half-sine wave (unidirectional only).
RF01000, Rev. C (1/4/13)
©2013 Microsemi Corporation
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Page 1 of 7
MSMBG5.0A – MXLSMBG170CAe3,
MSMBJ5.0A – MXLSMBJ170CAe3
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 requirements.
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL- STD-750, method 2026.
MARKING: Part number.
POLARITY: Cathode end banded.
TAPE & REEL option: Standard per EIA-481-1-A (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 0.1 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
M
SM
B
G
5.0
C
A
Reliability Level*
M
MA
MX
MXL
*(see High Reliability UpScreened Plastic Products
Portfolio)
e3
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
+/- 5% Tolerance Level
Polarity
C = bidirectional
Blank = unidirectional
Surface Mount Package
Stand-Off Voltage (V WM )
(see Electrical Characteristics
table)
600 W Power Level
Lead Form
G = Gull-Wing
J = J-Bend
SYMBOLS & DEFINITIONS
Definition
Symbol
VW M
PPP
V (BR)
ID
IPP
VC
IBR
Working Peak (Standoff) Voltage - The maximum peak voltage that can be applied over the operating temperature
range. This is also referred to as standoff voltage.
Peak Pulse Power - Rated random recurring peak impulse power dissipation.
Breakdown Voltage - The minimum voltage the device will exhibit at a specified current.
Standby Current - The current at the rated standoff voltage (V WM ).
Peak Pulse Current - The peak current during the impulse.
Clamping Voltage - Clamping voltage at I PP (peak pulse current) at the specified pulse conditions (typically shown as
maximum value).
Breakdown Current – The current used for measuring breakdown voltage V (BR) .
RF01000, Rev. C (1/4/13)
©2013 Microsemi Corporation
Page 2 of 7
MSMBG5.0A – MXLSMBG170CAe3,
MSMBJ5.0A – MXLSMBJ170CAe3
ELECTRICAL CHARACTERISTICS @ 25 ºC
PART NUMBER
Gull-Wing
MSMBG5.0A
MSMBG6.0A
MSMBG6.5A
MSMBG7.0A
MSMBG7.5A
MSMBG8.0A
MSMBG8.5A
MSMBG9.0A
MSMBG10A
MSMBG11A
MSMBG12A
MSMBG13A
MSMBG14A
MSMBG15A
MSMBG16A
MSMBG17A
MSMBG18A
MSMBG20A
MSMBG22A
MSMBG24A
MSMBG26A
MSMBG28A
MSMBG30A
MSMBG33A
MSMBG36A
MSMBG40A
MSMBG43A
MSMBG45A
MSMBG48A
MSMBG51A
MSMBG54A
MSMBG58A
MSMBG60A
MSMBG64A
MSMBG70A
MSMBG75A
MSMBG78A
MSMBG85A
MSMBG90A
MSMBG100A
MSMBG110A
MSMBG120A
MSMBG130A
MSMBG150A
MSMBG160A
MSMBG170A
RF01000, Rev. C (1/4/13)
J-Bend
MSMBJ5.0A
MSMBJ6.0A
MSMBJ6.5A
MSMBJ7.0A
MSMBJ7.5A
MSMBJ8.0A
MSMBJ8.5A
MSMBJ9.0A
MSMBJ10A
MSMBJ11A
MSMBJ12A
MSMBJ13A
MSMBJ14A
MSMBJ15A
MSMBJ16A
MSMBJ17A
MSMBJ18A
MSMBJ20A
MSMBJ22A
MSMBJ24A
MSMBJ26A
MSMBJ28A
MSMBJ30A
MSMBJ33A
MSMBJ36A
MSMBJ40A
MSMBJ43A
MSMBJ45A
MSMBJ48A
MSMBJ51A
MSMBJ54A
MSMBJ58A
MSMBJ60A
MSMBJ64A
MSMBJ70A
MSMBJ75A
MSMBJ78A
MSMBJ85A
MSMBJ90A
MSMBJ100A
MSMBJ110A
MSMBJ120A
MSMBJ130A
MSMBJ150A
MSMBJ160A
MSMBJ170A
REVERSE
STAND-OFF
VOLTAGE
VWM
V
5
6
6.5
7
7.5
8
8.5
9
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
I( BR)
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
PEAK PULSE
CURRENT
(see Fig. 2)
IPP
MAXIMUM
STANDBY
CURRENT
ID @ VWM
mA
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
V
9.2
10.3
11.2
12
12.9
13.6
14.4
15.4
17
18.2
19.9
21.5
23.2
24.4
26
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
A
65.2
58.3
53.6
50
46.5
44.1
41.7
39
35.3
33
30.2
27.9
25.8
24
23.1
21.7
20.5
18.5
16.9
15.4
14.2
13.2
12.4
11.3
10.3
9.3
8.6
8.3
7.7
7.3
6.9
6.4
6.2
5.8
5.3
4.9
4.7
4.4
4.1
3.7
3.4
3.1
2.9
2.5
2.3
2.2
µA
800
800
500
200
100
50
10
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BREAKDOWN VOLTAGE
V(BR)
V
6.40 – 7.00
6.67 – 7.37
7.22 – 7.98
7.78 – 8.60
8.33 – 9.21
8.89 – 9.83
9.44 – 10.4
10.0 – 11.1
11.1 – 12.3
12.2 – 13.5
13.3 – 14.7
14.4 – 15.9
15.6 – 17.2
16.7 – 18.5
17.8 – 19.7
18.9 – 20.9
20.0 – 22.1
22.2 – 24.5
24.4 – 26.9
26.7 – 29.5
28.9 – 31.9
31.1 – 34.4
33.3 – 36.8
36.7 – 40.6
40.0 – 44.2
44.4 – 49.1
47.8 – 52.8
50.0 – 55.3
53.3 – 58.9
56.7 – 62.7
60.0 – 66.3
64.4 – 71.2
66.7 – 73.7
71.1 – 78.6
77.8 – 86.0
83.3 – 92.1
86.7 – 95.8
94.4 – 104
100 – 111
111 – 123
122 – 135
133 – 147
144 – 159
167 – 185
178 – 197
189 – 209
@
©2013 Microsemi Corporation
Page 3 of 7
MSMBG5.0A – MXLSMBG170CAe3,
MSMBJ5.0A – MXLSMBJ170CAe3
PPP - Peak Pulse Power - kW
GRAPHS
tw – Pulse Width µs
Pulse Current in Percent of IPP
FIGURE 1
Peak Pulse Power vs Pulse Time
t – Time – ms
Test waveform parameters: tr=10 µs, tp=1000µs
FIGURE 2
Pulse Waveform for 10/1000 Exponential Surge
RF01000, Rev. C (1/4/13)
©2013 Microsemi Corporation
Page 4 of 7
MSMBG5.0A – MXLSMBG170CAe3,
MSMBJ5.0A – MXLSMBJ170CAe3
Peak Pulse Power (PPP) or continuous
Power in Percent of 25°C Rating
GRAPHS (continued)
T L Lead Temperature °C
C – Capacitance - Picofarads
FIGURE 3
Derating Curve
V (BR) - Breakdown Voltage - Volts
FIGURE 4
Typical Capacitance vs. Breakdown Voltage
NOTE: Bidirectional capacitance is half that shown at zero volts.
RF01000, Rev. C (1/4/13)
©2013 Microsemi Corporation
Page 5 of 7
MSMBG5.0A – MXLSMBG170CAe3,
MSMBJ5.0A – MXLSMBJ170CAe3
PACKAGE DIMENSIONS
SMBG (DO-215AA)
Ltr
A
B
C
E
F
K
Dimensions
Inch
Millimeters
Min
Max
Min
Max
.077
.083
1.96
2.10
.160
.180
4.06
4.57
.130
.155
3.30
3.94
.077
.104
1.95
2.65
.235
.255
5.97
6.48
.015
.030
.381
.762
SMBJ (DO-214AA)
Ltr
A
B
C
D
E
L
Dimensions
Inch
Millimeters
Min
Max
Min
Max
.077
.083
1.96
2.10
.160
.180
4.06
4.57
.130
.155
3.30
3.94
.205
.220
5.21
5.59
.077
.104
1.95
2.65
.030
.060
.760
1.52
See pad layout on next page.
RF01000, Rev. C (1/4/13)
©2013 Microsemi Corporation
Page 6 of 7
MSMBG5.0A – MXLSMBG170CAe3,
MSMBJ5.0A – MXLSMBJ170CAe3
PAD LAYOUT
RF01000, Rev. C (1/4/13)
Ltr
A
B
C
SMBG (DO-215AA)
Inch
Millimeters
0.320
8.13
0.085
2.16
0.110
2.79
Ltr
A
B
C
SMBJ (DO-214AA)
Inch
Millimeters
0.260
6.60
0.085
2.16
0.110
2.79
©2013 Microsemi Corporation
Page 7 of 7