P4KE

MP4KE6.8A – MP4KE400CA(e3)
Available
Screening in
reference to
MIL-PRF-19500
available
400 Watt
Transient Voltage Suppressors
DESCRIPTION
This family of high-reliability, plastic packaged Transient Voltage Suppressors offer high
reliability at an affordable price. Standoff voltage values range from 5.8 to 342 volts and 5% or
10% tolerance options are available. Source control is standard and three increasingly
stringent screening options for enhanced reliability are available.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
•
•
•
•
•
High reliability controlled devices with wafer fabrication and assembly lot traceability.
All devices 100% surge tested.
Optional screening in reference to MIL-PRF-19500 is also available. Refer to High Reliability NonHermetic Product portfolio for more details on Microsemi screening options.
Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B.
3σ lot norm screening performed on standby current (I D ).
RoHS compliant versions available.
DO-41 (DO-204AL)
Package
APPLICATIONS / BENEFITS
•
•
•
•
•
•
Suppresses transients up to 400 watts @ 10/1000 µs (see Figure 1).
2
Protects sensitive components such as IC’s, CMOS, Bipolar, BiCMOS, ECL, DTL, T L, etc.
Protection from switching transients & induced RF.
Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively.
Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance:
Class 1: MP4KE5.0A to MP4KE91CA
Class 2: MP4KE5.0A to MP4KE47ACA
Class 3: MP4KE5.0A to MP4KE24CA
Class 4: MP4KE5.0A to MP4KE12CA
Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance:
Class 1: MP4KE5.0A to MP4KE30CA
Class 2: MP4KE5.0A to MP4KE15CA
Also available in:
J-bend Package
(surface mount)
MSMBJ5.0A – MSMBJ170A
Gull-wing Package
(surface mount)
MSMBG5.0A – MSMBG170A
MAXIMUM RATINGS
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance, Junction to Leads
(1)
@ 3/8 inch (10 mm) from body
(2)
Peak Pulse Power Dissipation @ 10/1000 µs
o (3)
Off-State Power Dissipation
@ TL = +25 C
o (4)
@ TA = +25 C
o
Forward Voltage @ 25 C with 8.3 ms half-sine wave
(unidirectional only)
Solder Temperature @ 10 s
Symbol
TJ and TSTG
R ӨJL
P PP
PD
Value
-65 to +150
50
Unit
o
C
o
C/W
W
W
VF
400
2.5
1.13
3.5
TSP
260
o
V
C
Notes: 1. Or 110 °C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and
track width 1 mm, length 25 mm.
2. With impulse repetition rate (duty factor) of 0.01 % or less (see Figures 1, 2 and 3 for t W , waveform and
derating effects).
3. At 3/8 (10 mm) lead length from body.
4. On FR4 PC board with 110C/W junction to ambient with 4 mm2 copper pads (1 oz) and track width 1
mm and length 25 mm.
RF01006, Rev. B (5/8/13)
©2013 Microsemi Corporation
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Page 1 of 6
MP4KE6.8A – MP4KE400CA(e3)
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026.
MARKING: Part number.
POLARITY: Cathode indicated by band. Bi-directional not marked.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 0.3 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
M
P4K
E
6.8
C
A
Reliability Level*
M (controlled product)
MA (Avionics grade)
MX ( reference JANTX)
MXL (MX Lite)
(*See High Reliability NonHermetic Product portfolio)
(e3)
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Voltage Tolerance
A = 5% tolerance level
Blank = 10% tolerance
Point 4 kilowatt
Polarity
C = Bi-directional
Blank = Unidirectional
Encapsulated Plastic
Package
Stand-off Voltage Rating
SYMBOLS & DEFINITIONS
Definition
Symbol
α V(BR)
C
I (BR)
ID
I PP
P PP
V (BR)
VC
V WM
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in
temperature that caused it expressed in %/°C or mV/°C.
Capacitance: The capacitance in pF at a frequency of 1 MHz and specified voltage
Breakdown Current: The current used for measuring Breakdown Voltage V (BR) .
Standby Current: The current through the device at rated stand-off voltage.
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of I PP and V C .
Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region.
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an
impulse current (I PP ) for a specified waveform.
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
RF01006, Rev. B (5/8/13)
©2013 Microsemi Corporation
Page 2 of 6
MP4KE6.8A – MP4KE400CA(e3)
ELECTRICAL CHARACTERISTICS @ 25 oC
PART
NUMBER
(Note 2)
WORKING
STAND OFF
VOLTAGE
VWM
BREAKDOWN
VOLTAGE
V(BR) @
I(BR)
MAXIMUM
CLAMPING
VOLTAGE
VC@ IPP
MAXIMUM
STANDBY
CURRENT ID
@ VWM
PEAK PULSE
CURRENT
(see Fig. 2)
IPP
MAXIMUM
TEMPERATURE
COEFFICIENT
of V(BR)
α V(BR)
MP4KE6.8A
MP4KE7.5A
MP4KE8.2A
MP4KE9.1A
Volts
5.80
6.40
7.02
7.78
MIN
6.45
7.13
7.79
8.65
MAX
7.14
7.88
8.61
9.55
mA
10
10
10
1
Volts
10.5
11.3
12.1
13.4
µA
500
200
100
20
Amps
38
35
33
30
% / °C
0.057
0.061
0.065
0.068
MP4KE10A
MP4KE11A
8.55
9.40
9.50
10.5
10.5
11.6
1
1
14.5
15.6
5
2
28
26
0.073
0.075
MP4KE12A
MP4KE13A
10.2
11.1
11.4
12.4
12.6
13.7
1
1
16.7
18.2
1
1
24
22
0.078
0.081
MP4KE15A
MP4KE16A
12.8
13.6
14.3
15.2
15.8
16.8
1
1
21.2
22.5
1
1
19
18
0.084
0.086
MP4KE18A
MP4KE20A
15.3
17.1
17.1
19.0
18.0
21.0
1
1
25.2
27.7
1
1
16
14.5
0.088
0.090
MP4KE22A
MP4KE24A
MP4KE27A
MP4KE30A
18.8
20.5
23.1
25.6
20.9
22.8
25.7
28.5
23.1
25.2
28.4
31.5
1
1
1
1
30.6
33.2
37.5
41.4
1
1
1
1
13
12
11
9.5
0.092
0.094
0.096
0.097
MP4KE33A
MP4KE36A
MP4KE39A
MP4KE43A
28.2
30.8
33.3
36.8
31.4
34.2
37.1
40.9
34.7
37.8
41.0
45.2
1
1
1
1
45.7
49.9
53.9
59.3
1
1
1
1
9.0
8.0
7.5
7.0
0.098
0.099
0.100
0.101
MP4KE47A
MP4KE51A
MP4KE56A
MP4KE62A
40.2
43.6
47.8
53.0
44.7
48.5
53.2
58.9
49.4
53.6
58.8
65.1
1
1
1
1
64.8
70.1
77.0
85.0
1
1
1
1
6.2
5.7
5.2
4.7
0.101
0.102
0.103
0.104
MP4KE68A
MP4KE75A
58.1
64.1
64.6
71.3
71.4
78.8
1
1
92.0
103.0
1
1
4.4
3.9
0.104
0.105
MP4KE82A
MP4KE91A
70.1
77.8
77.9
86.5
86.1
95.5
1
1
113.0
125.0
1
1
3.5
3.2
0.105
0.106
MP4KE100A
MP4KE110A
MP4KE120A
MP4KE130A
85.5
94.0
102.0
111.0
95.0
105.0
114.0
124.0
105.0
116.0
126.0
137.0
1
1
1
1
137.0
152.0
165.0
179.0
1
1
1
1
2.9
2.6
2.4
2.2
0.106
0.107
0.107
0.107
MP4KE150A
MP4KE160A
MP4KE170A
MP4KE180A
128.0
136.0
145.0
154.0
143.0
152.0
162.0
171.0
158.0
168.0
179.0
189.0
1
1
1
1
207.0
219.0
234.0
246.0
1
1
1
1
1.95
1.8
1.7
1.6
0.108
0.108
0.108
0.108
MP4KE200A
MP4KE220A
171.0
185.0
190.0
209.0
210.0
231.0
1
1
274.0
328.0
1
1
1.5
1.0
0.108
0.110
MP4KE250A
MP4KE300A
214.0
256.0
237.0
285.0
263.0
315.0
1
1
344.0
414.0
1
1
1.0
1.0
0.110
0.110
MP4KE350A
MP4KE400A
300.0
342.0
333.0
380.0
368.0
420.0
1
1
482.0
548.0
1
1
1.0
1.0
0.110
0.110
NOTE 1: Forward Voltage (V F ) @ 30 amps peak, 8.3 ms sine wave equal to 3.5 volts maximum for MP4KE6.8A to 200A (excluding bidirectional).
NOTE 2: For bidirectional construction, indicate a CA suffix after part number. Bidirectional capacitance is half that shown in Figure 4 at zero
volts.
RF01006, Rev. B (5/8/13)
©2013 Microsemi Corporation
Page 3 of 6
MP4KE6.8A – MP4KE400CA(e3)
PPP -Peak Pulse Power (kW)
GRAPHS
t w – Pulse Width
Pulse Current in Percent of IPP
FIGURE 1
Peak Pulse Power vs. Pulse Time
t – Time – ms
FIGURE 2
Pulse Waveform for Exponential Surge
RF01006, Rev. B (5/8/13)
©2013 Microsemi Corporation
Page 4 of 6
MP4KE6.8A – MP4KE400CA(e3)
Peak Pulse Power (PPP) or continuous
Average Power in Percent of 25°C Rating
GRAPHS
Lead or Ambient Temperature °C
C – Capacitance - Picofarads
FIGURE 3
Derating Curve
V (BR) -Breakdown Voltage - Volts
FIGURE 4
MP4KE Typical Capacitance vs. Breakdown Voltage (Unipolar)
RF01006, Rev. B (5/8/13)
©2013 Microsemi Corporation
Page 5 of 6
MP4KE6.8A – MP4KE400CA(e3)
PACKAGE DIMENSIONS
NOTES: Cathode indicated by band.
Dim
LL
BL
BD
LD
RF01006, Rev. B (5/8/13)
©2013 Microsemi Corporation
Dimensions
Inches
Millimeters
Min
Max
Min
Max
1.00
25.4
0.205
5.207
0.107
2.72
0.030 0.034
0.76
0.86
Page 6 of 6