USB50403 – USB50424 Unidirectional TVSarray Available DESCRIPTION This USB50403 – USB50424 Transient Voltage Suppressor (TVS) family is packaged in a SOT-143 configuration giving protection to 1 unidirectional data or interface line. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 61000–4-2, electrical fast transients (EFT) per IEC 61000-4-4, and secondary effects of lightning. It is also available in RoHS compliant versions. These TVS arrays have a peak power rating of 500 watts for an 8/20 µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS, DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and Universal Serial Bus (USB) and I/O transceivers. SOT-143 Package Also available in: Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • • Bidirectional SOT-143 (surface mount) USB50403C – USB50424C Protects 1 unidirectional line Surge protection per IEC 61000-4-2 and IEC 61000-4-4 Provides electrically isolated protection UL 94V-0 flammability classification Ultra low capacitance, 3 pF per line pair Ultra low leakage RoHS compliant versions available APPLICATIONS / BENEFITS • • • EIA-RS485 data rates: 5 Mbs 10 Base T Ethernet USB data rate: 900 Mbs MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Symbol T J and T STG P PP df CT Peak Pulse Power @ 8/20 µs (see Figure 1) Impulse Repetition Rate Total Capacitance (f = 1 MHz) @ 0 V Solder Temperature @ 10 s Value -55 to +150 500 < 0.1 3 260 Unit ºC W % pF o C MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01091-1, Rev. C (6/17/15) ©2015 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 [email protected] Page 1 of 4 USB50403 – USB50424 MECHANICAL and PACKAGING • • • • • • • CASE: Molded SOT-143 surface mount TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating MARKING: See electrical characteristics table POLARITY: Pin #1 (Please refer to Schematic and Pad Layout for pin 1) TAPE & REEL option: Per EIA standard 481-1-A. Consult factory for quantities WEIGHT: Approximately 0.035 grams See Package Dimensions on last page. PART NOMENCLATURE USB 5 04 03 (e3) Rated for USB applications RoHS Compliance e3 = RoHS Compliant Blank = non-RoHS Compliant 500W P PP Rating Rated Standoff Voltage (V WM ) 4 Pin Package SYMBOLS & DEFINITIONS Definition Symbol α V(BR) CT ID V (BR) VC V WM Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/°C or mV/°C. Total Capacitance: The total small signal capacitance between the diode terminals of a complete device. Standby Current: The current through the device at rated stand-off voltage. Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP ) for a specified waveform. Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. ELECTRICAL CHARACTERISTICS PART NUMBER USB50403 USB50405 USB50412 USB50415 USB50424 DEVICE MARKING* AA AB AC AD AE CLAMPING VOLTAGE VC @ 5 Amp (Figure 2) Volts STANDBY CURRENT ID @ V WM Volts CLAMPING VOLTAGE VC @ 1 Amp (Figure 2) Volts MAX MIN MAX 3.3 5.0 12.0 15.0 24.0 4 6.0 13.3 16.7 26.7 8 10.8 19 24 43 STANDOFF VOLTAGE V WM BREAKDOWN VOLTAGE V (BR) @1 mA Volts TEMPERATURE COEFFICIENT OF V (BR) α V(BR) µA TOTAL CAPACITANCE (f= 1 MHz) CT @0V pF MAX MAX MAX MAX 11 13 26 32 57 200 20 1 1 1 3 3 3 3 3 -5 1 8 11 28 mV/°C * Device marking has a dot suffix for the e3 RoHS compliant option (e.g. AA●, AD●, etc.) RF01091-1, Rev. C (6/17/15) ©2015 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 [email protected] Page 2 of 4 USB50403 – USB50424 PPP – Peak Pulse Power - W GRAPHS t d - Pulse Duration - µs IPP – Peak Pulse Current - %IPP FIGURE 1 Peak Pulse Power vs Pulse Time t – Time in microseconds FIGURE 2 Pulse Waveform RF01091-1, Rev. C (6/17/15) ©2015 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 [email protected] Page 3 of 4 USB50403 – USB50424 PACKAGE DIMENSIONS Ltr A A1 B B1 C D E e1 e2 H L S Dimensions Inch Millimeters Min Max Min Max 0.890 1.120 22.61 28.45 0.013 0.100 0.330 2.54 0.760 0.940 19.30 23.88 0.370 0.510 9.40 12.95 0.085 0.180 2.16 4.57 2.800 3.040 71.12 77.22 1.200 1.400 30.48 35.56 1.920 BSC 48.26 BSC 0.200 BSC 5.08 BSC 2.100 2.640 53.34 67.06 0.55 REF 13.97 REF 0.450 0.600 11.43 15.24 SCHEMATIC and PAD LAYOUT Ltr A B C C1 D E F G H J Schematic RF01091-1, Rev. C (6/17/15) Dimensions Inch Millimeters Typ Typ 0.079 2.00 0.071 1.80 0.047 1.20 0.033 0.85 0.112 2.85 0.075 1.90 0.108 2.75 0.310 0.80 0.033 0.85 0.041 1.05 ©2015 Microsemi Corporation One Enterprise, Aliso Viejo, CA 92656 Ph: 949-380-6100 [email protected] Page 4 of 4