s RT series Miniature Printed Circuit Board Relays, Sockets and Accessories RT series (DC Coil) 16 Amp PC Board Miniature Relay Meets VDE 10mm Spacing, 5KV Dielectric File E22575 File LR15734 NR 6106 Features Coil Data @ 25°C • SPST through DPDT contact arrangements. • Immersion cleanable and flux tight versions available. • VDE 10mm spacing, 5kV dielectric, coil to contacts. • UL Class F coil insulation system. • Conforms to UL 508, 1873, 353 and 1950. • Low profile; 15.7mm height. • Sensitive coil; 400mW. • Withstand surge voltage of 10,000V. Voltage: 5 to 48VDC. Nominal Power @ 25°C: 400mW. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 25°C, 500VDC and 50% rel. humidity. Coil Data @ 25°C Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. Initial Contact Resistance: 100 milliohms max @ 1A 12VDC. Designed to meet UL/CSA/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CSA/VDE Ratings @ 25°C Code NO/NC Load 1 10A/10A @ 277VAC 10A/10A @ 30VDC 12A/12A @ 250VAC 12A/12A @ 30VDC 3/4 HP @ 480VAC* 1/2 HP @ 240VAC* 1/3 HP @ 120VAC* 48 LRA/10 FLA @ 240VAC* TV-3 @ 120VAC* A300, 720VA @ 240VAC* 3 5 Type Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Tungsten Pilot Duty Operations 100K 100K 30K 30K 6K 6K 6K 30K 25K 30K 16A/16A @ 250VAC 20A/20A @ 277VAC 20A/20A @ 24VDC 16A/16A @ 30VDC 1 HP @ 480VAC* 1 HP @ 240VAC* 1/2 HP @ 120VAC* 60 LRA/10 FLA @ 250VAC* TV-5 @ 120VAC* A300, 720VA @ 240VAC* B300, 360VA @ 240VAC** Resistive/GP Resistive/GP Resistive Resistive Motor Motor Motor Motor Tungsten Pilot Duty Pilot Duty 50K 30K 30K 30K 6K 6K 6K 30K 25K 30K 30K 8A/8A @ 277VAC 8A/8A @ 30VDC 10A/10A @ 250VAC 10A/10A @ 30VDC 1/2 HP @ 240VAC* 1/4 HP @ 120VAC* 34.8 LRA/6 FLA @ 120VAC* 17.4 LRA/5 FLA @ 240VAC* B300, 360VA @ 240VAC* TV-3 @120VAC* Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Pilot Duty Tungsten 100K 100K 30K 30K 6K 6K 30K 30K 30K 25K DC Resistance in Ohms ±10% Must Operate Voltage VAC Nominal Coil Current (mA) – 50/60Hz. 005 006 009 012 018 024 048 62 90 202 360 810 1,440 5,760 3.5 4.2 6.3 8.4 12.6 16.8 33.6 80 66.7 44.4 33.3 22.2 16.7 8.3 Max. Ambient Temp. vs. Coil Voltage Applied Coil Voltage (% of rated nom.) Contact Data Nominal Voltage VAC 300 260 220 180 0A 8A 12A 16A 140 100 60 B 0 A 20 40 60 80 Max. Allowable Ambient Temp. (°C) 100 A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load. Operate Data @ 25°C Must Operate Voltage(DC): 70% of nominal. Must Release Voltage(DC): 10% of nominal. Operate Time (Excluding Bounce): 7 ms, typ., 15ms max. at nom. voltage. Release Time (Excluding Bounce): 3 ms, typ., 6ms max. at nom. voltage. Environmental Data * Form A only ** Form B only Temperature Range: Storage: -40°C to +105°C. Operating: -40°C to +85°C at rated current. Vibration, Operational N.O.:0.065”(1.65mm) max. excursions from 10 - 55 Hz: N.C.:0.032”(0.82mm) max. excursions from 10 - 55 Hz: with no contact opening >10µs Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Surge Voltage (DC): >10,000VAC x (1.2 x 50 µsec). Termination: Printed circuit terminals. Enclosures: RT 1, 3, 4: Flux-tight, top vented, plastic case. RT B, D, E: Immersion cleanable, plastic case. Weight: 0.35 oz. (10g) approximately. Ordering Information Typical Part Number B RT 1 3 4 012 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPST) (Requires wiring diagram codes 1 or 3.) 2 = 2 Form C (DPST) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10 (standard stock). 5. Coil Voltage: 005 = 5VDC 006 = 6VDC 009 = 9VDC 012 = 12VDC 1 = Silver cadmium Oxide (Special order) 018 = 18VDC 024 = 24VDC 048 = 48VDC Stock Items RT134024 RTB14005 RTB14012 RT314012 RT314024 RT334012 RTB14024 RTB34012 RTB34024 RTD14005 RTD14012 RTD14024 RT424024 RT444012 RT444024 RTE44012 RTE44024 1 Pole .50 (12.7) 2 Pole 50 50 A Contact Current 6X .031 X .020 (.80 X .52) 1.14 (29) 10 B 5 2 1 0.5 2X .020 X .020 (.52 X .52) 0.1 10 .17 (4.3) 20 50 100 DC Voltage 10 5 2 1 A 0.1 10 20 50 100 DC Voltage A: 1 Contact. B: 2 Contacts in series. 1 Pole 16A 2 Pole 8A 5mm 1 Pole 12A 3.5mm .051 DIA. (1.30) .051 DIA. (1.30) .276 (7.0) Contact Life for Resistive AC Load (Typical) .400 (10.16) .800 (20.32) .800 (20.32) .051 DIA. (1.30) .300 (7.62) Code 1 .300 (7.62) Operations 107 A: 8A Model B: 12A Model C: 16A Model 106 B 5 10 A C Code 3 & 5 Note: On single throw models, only necessary terminals are present. 104 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA) Wiring Diagrams (Bottom View) 1 Pole 12A 1 Pole 16A 2 Pole 8A Code 1 Code 3 Code 5 Note: On single throw models, only necessary terminals are present. Note: Data from 250VAC @ 70°C. B 0.5 200 300 A: 16A Version. B: 12A Version. PC Board Layouts (Bottom View) .051 DIA. (1.30) RTE24005 RTE24012 RTE24024 Breaking Capacity Outline Dimensions .62 (15.7) RTD34012 RTD34024 RT424012 Contact Current RT114012 RT114024 RT134012 200 300 RT series (AC Coil) 16 Amp Miniature Printed Circuit Board Relay Meets VDE 10mm Spacing, 5KV Dielectric File E38891 File LR14385 NR 6106 Features Coil Data @ 20°C • • • • Voltage: 24, 115, 230VAC. Nominal Power @ 25°C: .75VA. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 20°C, 500VDC and 50% rel. humidity.. SPST through DPDT contact arrangements. Immersion cleanable and flux tight versions available. Meets VDE 10mm spacing, 5kV dielectric, coil to contacts. Conforms to UL 508, 1873 and 353. Contact Data Coil Data Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. DC Must Nominal Resistance Operate Voltage in Ohms Voltage VAC ±10% VAC 24 115 230 UL/CSA Ratings @ 25°C: Code NO/NC Load Type Operations 12A NO @ 240VAC 10A/5A @ 240VAC 8A @ 28VDC 1 HP @ 240VAC* 1/2 HP @ 120VAC* 8A @ 28VDC* B300 GP Resistive/GP Resistive Motor Motor Resistive Pilot Duty 30K 100K 30K 6K 6K 30K 6K 16A/8A @ 240VAC 8A @ 28VDC 1/2 HP @ 120VAC* 1HP @ 240VAC* 48 LRA, 8 FLA @ 240VAC B300 GP Resistive Motor Motor Motor Pilot Duty 6K 30K 6K 6K 30K 6K 8A @ 240VAC 8A @ 28VDC 1/2 HP @ 240VAC 1/4 HP @ 120VAC B300 Resistive Resistive/GP Motor Motor Pilot Duty 30K 30K 6K 6K 6K 1 3 5 3.6 17.3 34.5 31.6 6.6 3.3 24.3 5.1 2.3 300 260 220 180 0A 8A 12A 16A 140 100 60 B 0 A 20 40 60 80 Max. Allowable Ambient Temp. (°C) 100 A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load. Operate Data Must Operate Voltage: See coil data. Operate Time (Excluding Bounce): 8 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 11 ms, typ., at nom. voltage. * Form A only VDE Ratings @ 25°C: Code NO/NC Load 18.0 86.3 172.5 Max. Ambient Temp. vs. Coil Voltage Applied Coil Voltage (% of rated nom.) Designed to meet UL/CSA/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. 350 8,100 32,500 Nominal Nominal Drop-out Coil Coil Voltage Current Current VAC (mA)–50Hz. (mA)–60Hz. Type Operations 1 12A @ 250VAC 12A @ 250VAC Resistive Resistive 30K 100K 3 16A @ 250VAC 16A @ 250VAC Resistive Resistive 10K 50K 5 8A @ 250VAC 8A @ 250VAC Resistive Resistive 30K 50K Environmental Data Temperature Range: Storage: -40°C to +105°C. Operating: -40°C to +70°C at rated current. Vibration: 30 - 150 Hz: at 20g with no contact opening >10µs on the N.O. contact; at 5g with no contact opening >10µs on the N.C. contact. Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Creepage/Clearance, Coil to Contact: 10/10mm. Termination: Printed circuit terminals. Enclosures: RT 1, 3, 4: Flux-tight, top vented, plastic case. RT B, D, E: Immersion cleanable, plastic case. Weight: 0.42 oz. (12g) approximately. Ordering Information Typical Part Number B RT D 1 4 524 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPST) (Requires wiring diagram codes 1 or 3.) 2 = 2 Form C (DPST) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage: 524 = 24VAC 615 = 115VAC 730 = 230VAC Stock Items RTD14524 RTD14615 RTD14730 RTE24524 RTE24615 RTE24730 Breaking Capacity Outline Dimensions 1 Pole .50 (12.7) .62 (15.7) 50 6X .031 X .020 (.80 X .52) 50 Contact Current A 1.14 (29) 2X .020 X .020 (.52 X .52) .17 (4.3) 10 B 5 2 1 0.5 0.1 10 PC Board Layouts (Bottom View) 20 50 100 DC Voltage 200 300 10 5 2 1 A 0.5 0.1 10 20 50 100 DC Voltage .051 DIA. (1.30) .051 DIA. (1.30) Contact Life for Resistive AC Load (Typical) .276 (7.0) .394 (10.0) .788 (20.0) .051 DIA. (1.30) .051 DIA. (1.30) .296 (7.50) .296 (7.50) Operations 107 .788 (20.0) A: 8A Model B: 12A Model C: 16A Model 106 B 105 A C Code 3 & 5 Code 1 Note: On single throw models, only necessary terminals are present. 104 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA) Note: Data from 250VAC @ 70°C. Wiring Diagrams (Bottom View) 1 Pole 12A 1 Pole 16A 2 Pole 8A Code 1 Code 3 Code 5 Note: On single throw models, only necessary terminals are present. B A: 1 Contact. B: 2 Contacts in series. A: 16A Version. B: 12A Version. 1 Pole 16A 2 Pole 8A 5mm 1 Pole 12A 3.5mm 2 Pole Contact Current RTB14524 RTB14615 RTB14730 200 300 RT series (Latching) 16 Amp Miniature Printed Circuit Board Relay Meets VDE 10mm Spacing, 5KV Dielectric File E38891 File LR14385 NR 6106 Features Coil Data @ 20°C • • • • • Voltage: 5 to 24VDC*, 1 coil. 3 to 24VDC*, 2 coil. Nominal Power @ 25°C: 400mW, 1 coil. 600mW, 2 coil. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 20°C, 500VDC and 50% rel. humidity. Latching relay with 1 or 2 coils. SPDT (16A) and DPDT (8A) contact arrangements. Flux tight enclosure. Meets VDE 10mm spacing, 5kV dielectric, coil to contacts. Conforms to UL 508, 1873 and 353. * Other coil voltages upon request. 1 Coil Data Contact Data Arrangements: 1 Form C (SPDT) Wiring Diagram Code 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 5 million operations, 1 pole. 2 million operations, 2 pole. Designed to meet UL/CSA/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CSA ratings @ 70°C: Code NO/NC Load Type Operations 3 16A/8A @ 240VAC 8A @ 28VDC 1/2 HP @ 120VAC* 1HP @ 240VAC* 48 LRA, 8 FLA @ 240VAC B300 GP Resistive Motor Motor Motor Pilot Duty 6K 30K 6K 6K 30K 6K 5 8A @ 240VAC 8A @ 28VDC 1/2 HP @ 240VAC 1/4 HP @ 120VAC B300 Resistive Resistive/GP Motor Motor Pilot Duty 30K 30K 6K 6K 6K * Form A only VDE Ratings @ 70°C: Code NO/NC Load Type Operations 3 16A@ 250VAC 8A @ 250VAC Resistive Resistive 10K 30K 5 8A @ 250VAC 8A @ 250VAC Resistive Resistive 30K 100K Nominal Voltage VDC DC Resistance in Ohms ±10% Set Voltage VDC Reset Voltage VDC Nominal Coil Current (mA) 05 06 12 24 62 90 360 1,440 3.5—6.0 4.2—7.2 8.4—14.4 16.8—28.8 2.75—6.0 3.30—7.2 6.60—14.4 13.20—28.8 80.0 66.7 33.3 16.7 Nominal Voltage VDC DC Resistance in Ohms ±10% Set Voltage VDC Reset Voltage VDC Nominal Coil Current (mA) 05 06 12 24 42 55 240 886 3.5—7.5 4.2—9.0 8.4—18.0 16.8—36.0 2.75—4.5 3.30—9.0 6.60—18.0 13.20—36.0 120.0 108.0 50.0 27.0 2 Coil Data Operate Data @ 20°C Must Operate Voltage: See coil data. Operate Time (Excluding Bounce): 5 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 4 ms, typ., at nom. voltage. Max. Switching Rate: 360 ops. at rated load. Environmental Data Temperature Range: Storage: -40°C to +105°C. Operating: -40°C to +70°C at rated current. Vibration: 30 - 500 Hz: N/C opens at >3g and changes from reset to set at >5g; Shock: N/C opens at >6g and changes from reset to set at >15g.; Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Creepage/Clearance, Coil to Contact: 10/10mm. Termination: Printed circuit terminals. Enclosures: RT 3, 4: Flux-tight, top vented, plastic case. Weight: 0.46 oz. (13g) approximately. Ordering Information Typical Part Number B RT 3 2 4 A05 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram code 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage: 1 Coil A05 A06 A12 A24 2 Coil F05 F06 F12 F24 Voltage = 5VDC = 6VDC = 12VDC = 24VDC Stock Items Consult factory for availability. Wiring Diagrams (Bottom View) Outline Dimensions .50 (12.7) .62 (15.7) 1 Pole 16A 6X .031 X .020 (.80 X .52) 12 22 14 24 11 21 11 21 14 24 12 22 1.14 (29) * .17 (4.3) 2X .020 X .020 (.52 X .52) *2 Coil version only 2 Pole 8A A1 A3*A2 22 A3*A2 * 2 Coil Version Only Code 5 Code 3 PC Board Layout (Bottom View) Breaking Capacity 1 Pole 16A 2 Pole 8A 5mm 1 Pole .788 (20.0) .051 DIA. (1.30) Code 3 & 5 .296 (7.52) .148 * (3.76 * 2 Coil Version Only B 5 2 1 0.5 0.1 10 * 50 A 10 Contact Current .394 (10.0) 50 Contact Current .051 DIA. (1.30) 2 Pole 20 A: 16A Version. B: 12A Version. 50 100 DC Voltage 200 300 10 5 2 1 A B 0.5 0.1 10 20 50 100 DC Voltage A: 1 Contact. B: 2 Contacts in series. 200 300 RT series Sockets and Accessories File E135149 File LR14385 NR 5318 RT78625 with RPMU0730 RP78601 RT16016 Sockets for RT Series Relays RT786241 RT786251,2 RT786261,2 10A, 300VAC 5mm Pinning 1 Pole 10A, 250VAC 2 Pole 2x 10A, 250VAC 5mm Pinning 1 Pole 12A, 300VAC 2 Pole 2x 12A, 300VAC 5mm Pinning 21 11 21 11 22 12 14 24 14 21 11 24 14 2.972 (75.5) 2.972 (75.5) A1 A2 .610 (15.5) A2 A1 22 12 .610 (15.5) .874 (22.2) .177 (4.5) Relay 2.972 (75.5) .177 (4.5) Ejector Module A1 A2 .610 (15.5) .874 (22.2) .874 (22.2) .177 (4.5) 1.693 (43) 1.693 (43) Hold-Down Spring RT16016 2.283 (58) Ejector/Hold-Down Spring RT160163 Hold-Down Spring RT16016 RP786011 RP786021 10A, 250VAC 3.5mm Pinning 1 Pole 10A, 250VAC 2 Pole 2x 10A, 250VAC 5mm Pinning PC Board Layout (Bottom View) PC Board Layout (Bottom View) .20 (5.08) .138 (3.51) 1.22 (31.0) 1.22 (31.0) .425 (10.8) .5 (12.7) .189 (4.8) .189 (4.8) .354 (9.0) .425 (10.8) .80 (20.32) .60 (15.24) .5 (12.7) .30 (7.62) Ø .06 DIA. (1.52) Hold-Down Spring RP16041 .189 (4.8) .189 (4.8) .354 (9.0) .60 (15.24) .20 (5.08) .30 (7.62) Ø .06 DIA. (1.52) Hold-Down Spring RP16041 Socket and Accessory Selection Table Stock items are boldfaced. Socket Socket Termination RT786241,2 RT786251,2 RT786261 RP786011 RP786021 RPMU0730 DIN Screw Terminal DIN Screw Terminal DIN Screw Terminal PCB PCB RC Network 110..230VAC Hold-Down Spring RT16016 RT16016 RT16016 RP16041 RP16041 – * Note 1. Not suitable for bistable relay with two coils. 2. For a 16A 1 pole relay the following jumpers have to be connected; 11 to 21, 12 to 22 and 14 to 24. 3. Insertion of the relay. First the ejector (and eventually the module) has to be mounted onto the socket. Then the relay has to be set in the correct position and pressed into the socket until the ejector snaps over the top of the relay. Siemens Electromechanical Components, Inc. 700 Westpark Drive Peachtree City, GA 30269-1498 Specifications and availability subject to change without notice. 13C7800 Printed in U.S.A. IH/2-99