OPTO ■ Phototriac Package Mini-flat (SMD) PHOTOTRIAC COUPLER LINEUP Coupler Lineup Applied voltage AC 200 V lines (VDRM = 600V) ON-state current (rms) 0.05 A Features Model No. S2S3A00F*3 / S2S5A00F*3 / S2S5FA0F*3 General purpose Built-in zero-cross circuit S2S4A00F*3 DIP type (4-pin) DIP type (6-pin package, 5th-pin cut) AC 200 V lines (VDRM = 600V) 0.1 A 41 42 General purpose PC3ST11NSZKF 41 Reinforced isolation PC3SH11YFZAX*3 / PC3SH13YFZAX*3 41 Built-in zero-cross circuit PC3SH21YFZBX*2 42 AC 100 V lines (VDRM = 400V) 0.1 A General purpose PC2SD11NTZAF*3 41 AC 200 V lines (VDRM = 600V) 0.1 A General purpose PC3SD12NTZAF*3 / PC3SD11YTZCF*1 / PC3SD11NTZCF*1 / PC3SD13YXZBF*2 41 PC3SD21NTZAF*3 / PC3SD21NTZBF*2 / Built-in zero-cross circuit PC3SD21NTZDF*4 42 PC3SF11YVZAF*3 / PC3SF11YVZBF*2 41 Built-in zero-cross circuit PC3SF21YVZAF*3 / PC3SF21YVZBF*2 42 Reinforced isolation AC 200 V lines (VDRM = 800V) 0.1 A PC4SD11NTZCF*1 General purpose Built-in zero-cross circuit PC4SD21NTZCF*1 / PC4SD21NTZDF*4 Reinforced isolation PC4SF11YTZBF*2 Built-in zero-cross circuit PC4SF21YVZBF*2 / PC4SF21YWPSF*2 Minimum trigger current: *1 IFT ≦ 5 mA, *2 IFT ≦ 7 mA, *3 IFT ≦ 10 mA, *4 IFT ≦ 3 mA 40 Page 41 42 41 42 OPTO ■ Phototriac PHOTOTRIAC COUPLERS Couplers ○: Approved (Ta = 25°C) Approved by safety standards*4 Internal connection diagram Features UL, CSA S2S3A00F 200 V lines, compact ○ ○ *6 – S2S5A00F 200 V lines, compact ○ ○ *6 – S2S5FA0F High impulse noise product ○ ○ *6 – 200 V lines, compact ○ ○ *6 – 200 V lines, compact, reinforced isolation 200 V lines, compact, reinforced isolation, high noise resistance ○ ○ ○ *2 ○ ○ ○ *2 PC2SD11NTZAF 100 V lines ○ – – PC3SD12NTZAF 200 V lines ○ ○ *6 – PC3SD13YXZBF High impulse noise product ○ ○ *6 – PC3SD11YTZCF 200 V lines ○ ○ *6 – PC3ST11NSZKF PC3SH11YFZAX PC3SH13YFZAX PC3SD11NTZCF 200 V lines ○ ○ *6 – PC4SD11NTZCF 200 V lines, repetitive peak-OFF-state voltage ○ ○ *6 – PC3SF11YVZAF 200 V lines, reinforced isolation ○ ○ ○ *2 PC3SF11YVZBF 200 V lines, reinforced isolation ○ ○ ○ *2 PC4SF11YTZBF 200 V lines, reinforced isolation, repetitive peak-OFF-state voltage ○ ○ ○ *2 10 Mini-flat 4-pin 0.05 3.75 10 10 600 4-pin DIP 0.1 10 5.0 10 10 400 10 10 7 600 5 6-pin DIP*1, 3 0.1 600 800 5.0 5 5 10 600 7 800 7 Optoelectronics Model No. Electro-optical Absolute maximum ratings characteristics Repetitive Min. trigger Isolation peak current Package ON-state voltage current OFF-state IFT VDE Others (AC) (mA) MAX. voltage IT (rms) Viso (rms) (A) VD = 6 V, VDRM (kV) (V) RL = 100Ω For the notes *1 to *6, see next page. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 41 OPTO ■ PHOTOTRIAC COUPLERS Phototriac Couplers (Built-in zero-cross circuit type) ○: Approved (Ta = 25°C) Approved by safety standards*4 Model No. S2S4A00F Internal connection diagram Zero-cross circuit PC3SH21YFZBX PC3SD21NTZAF PC3SD21NTZBF PC3SD21NTZDF PC4SD21NTZCF PC4SD21NTZDF PC3SF21YVZAF 200 V lines, compact ○ 200 V lines, compact, reinforced isolation ○ ○ ○ *2 200 V lines, low zero-cross voltage: MAX. 20 V 200 V lines, low zero-cross voltage: MAX. 20 V 200 V lines, low zero-cross voltage: MAX. 20 V 200 V lines, repetitive peak-OFF-state voltage 200 V lines, repetitive peak-OFF-state voltage ○ ○ *6 – ○ ○ *6 – ○ ○ *6 – ○ ○ *6 – ○ ○ *6 – 200 V lines, reinforced isolation ○ ○ ○ *2 200 V lines, reinforced isolation ○ ○ ○ *2 PC4SF21YVZBF 200 V lines, reinforced isolation, repetitive peak-OFF-state voltage ○ ○ ○ *2 High impulse noise product ○ ○ ○ *2 4-pin DIP 0.1 600 5.0 7 10 600 7 3 6-pin DIP*1, 3 5 800 0.1 5.0 3 10 600 7 7 6-pin DIP*3 800 7 Lead forming type for surface mounting is also available. In conformance with BSI, SEMKO, DEMKO, and FIMKO These are molded pin No. 5. Please refer to Specification Sheets for model numbers approved by safety standards. VD = 6 V, RL = 100Ω Optionally available S2S3A00F (Mini-flat 4-pin) 42 UL, CSA PC3SF21YVZBF PC4SF21YWPSF *1 *2 *3 *4 *5 *6 Zero-cross circuit Features Electro-optical Absolute maximum ratings characteristics Min. trigger Repetitive Isolation current Package ON-state voltage peak current IFT (AC) VDE Others OFF-state (mA) MAX. IT (rms) VDRM Viso (rms) (A) VD = 4 V, (V) (kV) RL = 100Ω Mini-flat – 0.05 600 3.75 10*5 ○ *6 4-pin PC3ST series (4-pin DIP) PC3SH series (4-pin DIP) PC2SD11NTZAF ⎧PC3SD series,⎫ ⎜PC4SD series ⎜ ⎭ ⎩ (6-pin DIP) PC3SF series (PC4SF series) (6-pin DIP) Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.