Front-End Units Lineup PDF(336KB)

RF
■ Digital
DIGITAL DBS FRONT-END UNITS
DBS Front-End Units
♦ Features
(1) Equipped with a high-performance direct conversion IC. Reliability is improved by reducing power consumption and component
counts.
(2) Wide-band reception design also covering CS broadcast band. [Input frequency: 950 to 2 150 MHz]
(3) User support tools can be provided. [Sample/evaluation boards and software are available.]
♦ Standard
Specifications <IQ output type>
Destination
Global (ISDB-S/DVB-S2/ABS-S)
Input type
1-input/1-loop through output
1-input
Model No.
BS2S7VZ7D03
BS2S7VZ6D02
Input frequency (MHz)
950 to 2 150
Input signal level (dBm)
–65 to –25
Base band frequency bandwidth (MHz)
5 to 40, 2 MHz step (BB LPF)
RF input local leak (dBm)
–68 and below
Output type
I/Q
Noise figure (dB)
6 (TYP.)
Phase noise (dBc/Hz)
–88 (TYP.) at 10 kHz offset
Supply voltage (V DC)
3.3
LNB power supply
DC 25 V, 400 mA (MAX.)
Input impedance (Ω)
Outline dimensions (mm)
75
30.4 (W) × 29.4 (D) × 12.9 (H)
25.2 (W) × 17.4 (D) × 8.7 (H)
※ Low-profile type is also available.
BS2S7VZ6D02
RF Components
BS2S7VZ7D03
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
73
FRONT-END UNITS FOR ISDB-T/S /
FRONT-END UNITS FOR DVB-T2/DTMB
RF
■ Front-End
Units for ISDB-T/S
♦ Features
(1) Low phase noise characteristics, high elimination of adjacent channel interference.
(2) Compact, low power consumption.
♦ Standard
Specifications
Destination
Japan (ISDB-T/S)
Model No.
VA4S5JD2358
Digital terrestrial
Number of tuners
Input frequency (MHz)
Output type
Noise figure (dB)
Phase noise (dBc/Hz)
Supply voltage (V DC)
Power consumption (W)
VA4S6JD2359
Digital satellite
Digital terrestrial
Digital satellite
VA4S7JD2371
Digital terrestrial
Digital satellite
1
1
2
2
3
3
93 to 767
950 to 2 150
93 to 767
950 to 2 150
93 to 767
950 to 2 150
DIF
I,Q
DIF
I,Q
DIF
I,Q
4 (TYP.)
–87 (TYP.)
at 10 kHz offset
1.8, 3.3, 5
5 (TYP.)
–85 (TYP.)
at 10 kHz offset
3.3
4 (TYP.)
–87 (TYP.)
at 10 kHz offset
1.8, 3.3, 5
5 (TYP.)
–85 (TYP.)
at 10 kHz offset
3.3
4 (TYP.)
–87 (TYP.)
at 10 kHz offset
1.8, 3.3, 5
5 (TYP.)
–85 (TYP.)
at 10 kHz offset
3.3
0.9
0.7
1.4
1.2
1.9
1.8
Outline dimensions (mm)
41 (W) × 34 (D) × 8.75 (H)
VA4S7JD2371
(VA4S5JD2358, VA4S6JD2359)
■ Front-End
Units for DVB-T2/DTMB
♦ Features
(1) Low phase noise characteristics, high elimination of adjacent channel interference.
(2) Compact, low power consumption.
(3) Other types are available with various chassis forms (vertical or horizontal type) and input connectors (F or DIN type), etc.
♦ Standard
Specifications
Destination
Model No.
Europe/Asia (DVB-T2), China (DTMB)
VA4M1DX2331
Input frequency (MHz)
Output type
VA4M1DX2323
VA4M2DX2194
DIF (Off through)
DIF (Dual output)
51 to 868
DIF
47 to 868
Noise figure (dB)
5 (TYP.)
Phase noise (dBc/Hz)
–90
Supply voltage (V DC)
3.3, 1.8
0.49
1.13
Outline dimensions (mm)
24.2 (W) × 25.8 (D) × 8 (H)
41.3 (W) × 37.5 (D) × 12.3 (H)
VA4M1DX2331
74
5, 3.3, 1.8
Power consumption (W)
VA4M2DX2194
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
FRONT-END UNITS FOR DIGITAL TERRESTRIAL AND
ANALOG TERRESTRIAL BROADCASTING
RF
■ Front-End
Units for Digital Terrestrial and Analog Terrestrial Broadcasting
♦ Features
Contributing to the development of thinner LCD TVs and similar products by combining compatibility with digital and analog terrestrial
broadcasts into a single unit.
♦ Standard
Specifications
Destination
Brazil
China*1
Model No.
VA4M1BC1228
VA4M1CA1309
Input frequency (MHz)
47 to 866
Output type
IF
Digital IF bandwidth (MHz)
6
8
Phase noise (dBc/Hz)
–90 (TYP.) at 10 kHz offset
Supply voltage (V DC)
3.3
Noise figure (dB)
4 (TYP.)
PLL (I2C-bus)*2
Channel selection system
Outline dimensions (W) × (D) × (H) (mm)
30 × 28 × 7.5
26.2 × 20 × 10.6
*1 Built-in isolator type
*2 I2C-bus is a trademark of Philips Corporation.
VA4M1BC1228
VA4M1CA1309
♦ Features
Universal specifications compatible with various broadcasting systems all over the world.
Digital: DVB-T/T2, DVB-C, ATSC, ISDB-T, DTMB
Analog: NTSC-M/N, PAL-B/G/I/DK, SECAM-L, L’
Specifications
Destination
Global
Model No.
VA4M1DB1370
Input frequency (MHz)
47 to 868
Output type
IF
Noise figure (dB)
4 (TYP.)
Phase noise (dBc/Hz)
–90 (TYP.)
Supply voltage (V)
3.3
Outline dimensions (W) × (D) × (H) (mm)
27 × 14 × 7.5
VA4M1DB1370
RF Components
♦ Standard
※ Contact SHARP for custom design product.
(For connector shape or facing side, analog output format, etc.)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
75
RF
■
TUNER MODULE FOR MULTIMEDIA BROADCAST RECEPTION
Tuner Module for Multimedia Broadcast Reception
♦Features
(1) Compact and thin design: 6.7 × 6.7 × 1.0 mm
(2) Capable of receiving digital terrestrial broadcasts such as One-seg or Full-seg.
(3) Output interface: TS or SPI output
VA3D5JZ714
♦ Standard
Specifications
Destination
Japan
Model No.
VA3D5JZ714
90 to 108
207.5 to 222
470 to 710
1.1, 1.8, I/O: 1.8
80 (When receiving One-seg broadcasting)
135 (When receiving V-High multimedia broadcasting)
145 (When receiving Full-seg broadcasting)
–20 to +65
Input frequency (MHz)
Supply voltage (V)
Power consumption (mW)
Operating temperature range (°C)
Control I/F
Outline dimensions (mm)
I2C-bus*1
6.7 × 6.7 × 1.0
*1 I2C-bus is a trademark of Philips Corporation.
76
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
ONE-SEG TUNER MODULE /
DIGITAL TERRESTRIAL FRONT-END UNIT WITH EWBS
RF
EWBS: Emergency Warning Broadcasting System
■ One-Seg
Tuner Module
♦Features
(1) High sensitivity:
(2) Compact and thin design:
(3) Low power consumption:
(4) Output interface:
-100 dBm (13 seg, QPSK CR: 2/3)
5.4 × 5.4 × 1.0 mm
41 mW (with software power control)
TS serial output
VA3A5JZ967
♦ Standard
Specifications
Destination
Japan
Model No.
VA3A5JZ967
Input frequency (MHz)
470 to 770 (UHF: 13 to 62)
Input signal level (dBm)
–100 (13 seg, QPSK CR: 2/3)
1.2 (RF)
1.2 (OFDM Core)
1.62 to 3.6 (I/O)
41 (TYP.)
Supply voltage (V DC)
Power consumption (mW)
Operating temperature range (°C)
–20 to +65
I2C-bus*1
Control I/F
Outline dimensions (mm)
5.4 (W) × 5.4 (D) × 1.0 (H)
*1 I2C-bus is a trademark of Philips Corporation.
■
Digital Terrestrial Front-End Unit with EWBS
♦Features
VA4M1FB0337
♦ Standard
Specifications
Product name
Digital terrestrial front-end unit with EWBS
Destination
Japan/Global (common)
Model No.
VA4M1FB0337
Reception bandwidth (MHz)
Reception frequency range (MHz)
Standby power consumption (mW)
Communication system
Power supply (V)
Outline dimensions (mm)
6/7/8
Full-seg tuner: (54 to 864),
EWBS module: UHF (470 to 862)
Full-seg tuner: 690 (TYP.),
EWBS: 63 (TYP.)
I2C
RF Components
(1) Reduced power consumption with use of One-seg broadcasting system
(2) Compact size for simple assembly
Full-seg tuner: 3.3,
EWBS: 3.3, 1.2
34 × 40.5 × 7.8
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
77