RF ■ Europe: EUROPE: LNBs FOR SATELLITE BROADCAST LNBs for Satellite Broadcast ♦ Features (1) Wide band type receiving all broadcasting channels (analog & digital) in Europe. [Universal LNB] (2) Originally developed feed-horn waveguide makes the wide-band, low-noise characteristics possible. (3) One of the industry’s most compact and lightweight package. (4) Low dissipation current design for energy saving. [95 mA (TYP.): BS1K2EL100A] ♦ Specifications Destination Europe, Astra/Eutelsat Satellite etc. Receiving polarization Model No. <Type> Input frequency (GHz) Horizontal/Vertical polarization BS1K2EL400A BS1K2EL200A <4-output> <2-output> 10.7 to 11.7 [Low band], 11.7 to 12.75 [High band] BS1K1EL500A <4-output> Output frequency (MHz) 950 to 1 950 [Low band], 1 100 to 2 150 [High band] Local oscillation frequency (GHz) 9.75 [Low band], 10.6 [High band] NF (dB) 0.4 (TYP.) Conversion gain (dB) 56 (TYP.) Phase noise (dBc/Hz) –55 (TYP.) at 1 kHz –80 (TYP.) at 1 kHz 25 (TYP.) Supply voltage (V DC) Vertical polarization (Polarization switching) Horizontal polarization Dissipation current (mA) 0.3 (TYP.) 58 (TYP.) Cross-polar discrimination (dB) 11.5 to 14.0 (0/22 kHz) 16.0 to 19.0 (0/22 kHz) 200 (TYP.)/250 (MAX.) Waveguide 135 (TYP.)/300 (MAX.) 200 (TYP.)/250 (MAX.) 95 (TYP.)/120 (MAX.) Feed-horn (F/D = 0.6) Output impedance (Ω) Output connector (F-type) Outline dimensions (W) × (D) × (H) (mm) Weight (g) 4-output (H/H, H/L, V/H, V/L) 150 × 70 × 60 Approx. 190 BS1K1EL500A 72 BS1K2EL100A <1-output> BS1K2EL400A 75 2-output 1-output 4-output (H/V, High and low switching) (H/V, High and low switching) (H/V, High and low switching) 159 × 70 × 60 153 × 60 × 60 101 × 60 × 60 Approx. 200 Approx. 145 Approx. 75 BS1K2EL200A BS1K2EL100A Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. RF ■ Digital DIGITAL DBS FRONT-END UNITS DBS Front-End Units ♦ Features (1) Equipped with a high-performance direct conversion IC. Reliability is improved by reducing power consumption and component counts. (2) Wide-band reception design also covering CS broadcast band. [Input frequency: 950 to 2 150 MHz] (3) User support tools can be provided. [Sample/evaluation boards and software are available.] ♦ Standard Specifications <IQ output type> Destination Global (ISDB-S/DVB-S2/ABS-S) Input type 1-input/1-loop through output 1-input Model No. BS2S7VZ7D03 BS2S7VZ6D02 Input frequency (MHz) 950 to 2 150 Input signal level (dBm) –65 to –25 Base band frequency bandwidth (MHz) 5 to 40, 2 MHz step (BB LPF) RF input local leak (dBm) –68 and below Output type I/Q Noise figure (dB) 6 (TYP.) Phase noise (dBc/Hz) –88 (TYP.) at 10 kHz offset Supply voltage (V DC) 3.3 LNB power supply DC 25 V, 400 mA (MAX.) Input impedance (Ω) Outline dimensions (mm) 75 30.4 (W) × 29.4 (D) × 12.9 (H) 25.2 (W) × 17.4 (D) × 8.7 (H) ※ Low-profile type is also available. BS2S7VZ6D02 RF Components BS2S7VZ7D03 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 73 FRONT-END UNITS FOR ISDB-T/S / FRONT-END UNITS FOR DVB-T2/DTMB RF ■ Front-End Units for ISDB-T/S ♦ Features (1) Low phase noise characteristics, high elimination of adjacent channel interference. (2) Compact, low power consumption. ♦ Standard Specifications Destination Japan (ISDB-T/S) Model No. VA4S5JD2358 Digital terrestrial Number of tuners Input frequency (MHz) Output type Noise figure (dB) Phase noise (dBc/Hz) Supply voltage (V DC) Power consumption (W) VA4S6JD2359 Digital satellite Digital terrestrial Digital satellite VA4S7JD2371 Digital terrestrial Digital satellite 1 1 2 2 3 3 93 to 767 950 to 2 150 93 to 767 950 to 2 150 93 to 767 950 to 2 150 DIF I,Q DIF I,Q DIF I,Q 4 (TYP.) –87 (TYP.) at 10 kHz offset 1.8, 3.3, 5 5 (TYP.) –85 (TYP.) at 10 kHz offset 3.3 4 (TYP.) –87 (TYP.) at 10 kHz offset 1.8, 3.3, 5 5 (TYP.) –85 (TYP.) at 10 kHz offset 3.3 4 (TYP.) –87 (TYP.) at 10 kHz offset 1.8, 3.3, 5 5 (TYP.) –85 (TYP.) at 10 kHz offset 3.3 0.9 0.7 1.4 1.2 1.9 1.8 Outline dimensions (mm) 41 (W) × 34 (D) × 8.75 (H) VA4S7JD2371 （VA4S5JD2358, VA4S6JD2359） ■ Front-End Units for DVB-T2/DTMB ♦ Features (1) Low phase noise characteristics, high elimination of adjacent channel interference. (2) Compact, low power consumption. (3) Other types are available with various chassis forms (vertical or horizontal type) and input connectors (F or DIN type), etc. ♦ Standard Specifications Destination Model No. Europe/Asia (DVB-T2), China (DTMB) VA4M1DX2331 Input frequency (MHz) Output type VA4M1DX2323 VA4M2DX2194 DIF (Off through) DIF (Dual output) 51 to 868 DIF 47 to 868 Noise figure (dB) 5 (TYP.) Phase noise (dBc/Hz) –90 Supply voltage (V DC) 3.3, 1.8 0.49 1.13 Outline dimensions (mm) 24.2 (W) × 25.8 (D) × 8 (H) 41.3 (W) × 37.5 (D) × 12.3 (H) VA4M1DX2331 74 5, 3.3, 1.8 Power consumption (W) VA4M2DX2194 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. FRONT-END UNITS FOR DIGITAL TERRESTRIAL AND ANALOG TERRESTRIAL BROADCASTING RF ■ Front-End Units for Digital Terrestrial and Analog Terrestrial Broadcasting ♦ Features Contributing to the development of thinner LCD TVs and similar products by combining compatibility with digital and analog terrestrial broadcasts into a single unit. ♦ Standard Specifications Destination Brazil China*1 Model No. VA4M1BC1228 VA4M1CA1309 Input frequency (MHz) 47 to 866 Output type IF Digital IF bandwidth (MHz) 6 8 Phase noise (dBc/Hz) –90 (TYP.) at 10 kHz offset Supply voltage (V DC) 3.3 Noise figure (dB) 4 (TYP.) PLL (I2C-bus)*2 Channel selection system Outline dimensions (W) × (D) × (H) (mm) 30 × 28 × 7.5 26.2 × 20 × 10.6 *1 Built-in isolator type *2 I2C-bus is a trademark of Philips Corporation. VA4M1BC1228 VA4M1CA1309 ♦ Features Universal specifications compatible with various broadcasting systems all over the world. Digital: DVB-T/T2, DVB-C, ATSC, ISDB-T, DTMB Analog: NTSC-M/N, PAL-B/G/I/DK, SECAM-L, L’ Specifications Destination Global Model No. VA4M1DB1370 Input frequency (MHz) 47 to 868 Output type IF Noise figure (dB) 4 (TYP.) Phase noise (dBc/Hz) –90 (TYP.) Supply voltage (V) 3.3 Outline dimensions (W) × (D) × (H) (mm) 27 × 14 × 7.5 VA4M1DB1370 RF Components ♦ Standard ※ Contact SHARP for custom design product. (For connector shape or facing side, analog output format, etc.) Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 75 RF ■ TUNER MODULE FOR MULTIMEDIA BROADCAST RECEPTION Tuner Module for Multimedia Broadcast Reception ♦Features (1) Compact and thin design: 6.7 × 6.7 × 1.0 mm (2) Capable of receiving digital terrestrial broadcasts such as One-seg or Full-seg. (3) Output interface: TS or SPI output VA3D5JZ714 ♦ Standard Specifications Destination Japan Model No. VA3D5JZ714 90 to 108 207.5 to 222 470 to 710 1.1, 1.8, I/O: 1.8 80 (When receiving One-seg broadcasting) 135 (When receiving V-High multimedia broadcasting) 145 (When receiving Full-seg broadcasting) –20 to +65 Input frequency (MHz) Supply voltage (V) Power consumption (mW) Operating temperature range (°C) Control I/F Outline dimensions (mm) I2C-bus*1 6.7 × 6.7 × 1.0 *1 I2C-bus is a trademark of Philips Corporation. 76 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. ONE-SEG TUNER MODULE / DIGITAL TERRESTRIAL FRONT-END UNIT WITH EWBS RF EWBS: Emergency Warning Broadcasting System ■ One-Seg Tuner Module ♦Features (1) High sensitivity: (2) Compact and thin design: (3) Low power consumption: (4) Output interface: -100 dBm (13 seg, QPSK CR: 2/3) 5.4 × 5.4 × 1.0 mm 41 mW (with software power control) TS serial output VA3A5JZ967 ♦ Standard Specifications Destination Japan Model No. VA3A5JZ967 Input frequency (MHz) 470 to 770 (UHF: 13 to 62) Input signal level (dBm) –100 (13 seg, QPSK CR: 2/3) 1.2 (RF) 1.2 (OFDM Core) 1.62 to 3.6 (I/O) 41 (TYP.) Supply voltage (V DC) Power consumption (mW) Operating temperature range (°C) –20 to +65 I2C-bus*1 Control I/F Outline dimensions (mm) 5.4 (W) × 5.4 (D) × 1.0 (H) *1 I2C-bus is a trademark of Philips Corporation. ■ Digital Terrestrial Front-End Unit with EWBS ♦Features VA4M1FB0337 ♦ Standard Specifications Product name Digital terrestrial front-end unit with EWBS Destination Japan/Global (common) Model No. VA4M1FB0337 Reception bandwidth (MHz) Reception frequency range (MHz) Standby power consumption (mW) Communication system Power supply (V) Outline dimensions (mm) 6/7/8 Full-seg tuner: (54 to 864), EWBS module: UHF (470 to 862) Full-seg tuner: 690 (TYP.), EWBS: 63 (TYP.) I2C RF Components (1) Reduced power consumption with use of One-seg broadcasting system (2) Compact size for simple assembly Full-seg tuner: 3.3, EWBS: 3.3, 1.2 34 × 40.5 × 7.8 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 77