PM2.5 SENSOR MODULE / TEMPERATURE AND HUMIDITY SENSOR Sensor ☆ New ■ PM2.5 product Sensor Module ♦Features (1) Easy assembly for use in air purifiers and other products thanks to small size of 53 × 40 × 51 mm (2) Industry’s shortest*1 detection time of 10 seconds (3) Digital output model is also part of line-up *1: As of May 1, 2015 (measured by Sharp) Analog output type: DN7C3CA006 / 007 Digital output type: DN7C3CD015 ♦Standard Specifications ☆DN7C3CD015 [Japan / Overseas] DN7C3CA006 / 007 [Overseas] Model No. Measuring range (μg/m3) 25 to 500 25 to 500 Output type Analog voltage Digital PWM Power supply voltage (Vcc/fan) DC5 V / DC5 V DC5 V / DC5 V At sensor: 55, At fan: 700 [JA001, CA006] 450 [CA007] At sensor: 75, At fan: 450 0 to 3.4 (MIN.) Vhigh: Vcc-1.5 (MIN.), Vlow: 1.3 (MAX.) Power consumption (mW) (TYP.) Output voltage range (V) Operating temperature range (°C) Outline dimensions (mm) ■ Temperature –10 to +60 –10 to +60 53.0 × 40.0 × 51.0 (excluding protruding parts) 53.0 × 40.0 × 51.0 (excluding protruding parts) and Humidity Sensor ♦Features (1) Package: 3.0 x 3.0 x 0.8 mm, reflowable, QFN (2) High-speed response: Approx. 7 sec.*1 (3) Interface: I2C QM1H0P0073 ♦Standard Specifications Humidity sensor Temperature sensor Macromolecule capacity Semiconductor 0 to 100% RH –20 to +85°C Accuracy ±2% RH (25°C) ±0.3°C Resolution 0.01% RH Type Measuring range Interface SENSOR *1: For 63% of humidity change 0.02°C I2C Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 79