ACTM-1078 Tunnel Diode Detector Modules Data Sheet Revision Date: 12/23/2015 The most important thing we build is trust DESCRIPTION: The detectors listed are standard products. There are many possible variations, which can be selected as options. Package configurations can be changed if desired. Performance characteristics may be modified to meet special requirements (e.g. the sensitivity might be moved higher or lower with a corresponding effect on VSWR). RF bypass capacitance values can be selected on some models. Contact the factory for special needs. SPECIFICATIONS: Parameter Specification Unit of Measure 0.005 – 0.5 GHz Sensitivity (min) 800 mV/mW Flatness vs. Frequency (max) 0.2 ±dB Typical TSS -50 dBm Typical VSWR 2.2:1 Ratio Nominal Video Capacitance 1000 pF Frequency Range (min) OUTLINE DRAWING: FEATURES: • Hermetically sealed module, internal RF matching, DC return, and RF bypass capacitor • Input impedance matching • Models may be chosen for broadband RF performance of for optimized narrow bands STANDARD CASE STYLE M12 Revised Date: 12/23/2015 (732) 460-0212 www.cobham.com/CSCS 1 ACTM-1078 Tunnel Diode Detector Modules NOTES: ENVIRONMENTAL SPECIFICATIONS*: Maximum input power: +14 dBm (3 dB guardband for +17 dBm possible burnout) MIL-E-5400, MIL-STD-202, MIL-E-16400 Sensitivity is measured into an open circuit load (>10k ohm). Storage Temp: -65°C to +100°C Operating Temp: -55°C to +100°C VSWR is measured at or below -20 dBm input power level. Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information. SCREENING: Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A * Compliant by design, verification optional Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65 °C to +100 °C, 10 cycles OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534): Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 PART NUMBER ORDERING INFORMATION: Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACTM-1078N) Add desired case style suffix: “M22” (Ex: ACTM-1078NM12) Add “-RC” suffix: RoHS-compliant (Ex: ACTM-1078NM12-RC) ISO 9001:2008 and AS9100 certified For further information please contact: Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales representative to verify that the information in this data sheet is current before using this product. CSCS does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of CSCS or of third parties. Cobham Signal & Control Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Phone: (732) 460-0212 Fax: (732) 460-0214 [email protected] Copyright 2015, Cobham Signal & Control Solutions. All rights reserved. Revised Date: 12/23/2015 (732) 460-0212 www.cobham.com/CSCS 2