ACTM-1146 Surface Mount Tunnel Detector Features: • Contains hermetically sealed modules, internal RF matching, DC return, and RF bypass capacitor. • The video port is protected from static or transient charges. • Input impedance matching. • Models may be chosen for broadband RF performance of for optimized narrow bands Specifications: Parameter Specification Units 0.5 – 1 GHz 1000 mV/mW 0.2 ±dB Typical VSWR 2.3:1 Ratio Nominal Video Capacitance 270 pF Frequency Range (min) Sensitivity (min) Flatness vs. Frequency (max) Notes: SCREENING: Maximum input power: +14 dBm (3 dB guardband for +17 dBm possible burnout) Internal Visual per MIL-STD-883, Method 2017 Sensitivity is measured into an open circuit load (>10k ohm). VSWR is measured at or below -20 dBm input power level. Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information. Environmental Specifications: Temperature Cycle: -65 °C to +100 °C, 10 cycles OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534): Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Designed to meet: Leak Test per MIL-STD-883, Method 1014 MIL-E-5400, MIL-STD-202, MIL-E-16400 External Visual per MIL-STD-883, Method 2009 Operating Temp: -55°C to +125°C Storage Temp: -65°C to +150°C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D SIGNAL & CONTROL SOLUTIONS Revision Date: 11/4/2013 40 Industrial Way East, Eatontown , NJ 07724 [USA] Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/ascs, email: [email protected] ACTM-1146 Surface Mount Tunnel Detector SIGNAL & CONTROL SOLUTIONS Outline Drawing: STANDARD CASE STYLE M47 (Optional Case Styles – M10) Part Number Ordering Information: • • • Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACTM-1146N) Add desired case style suffix: “M47” (Ex: ACTM-1146NM47) Add “-RC” suffix: RoHS-compliant (Ex: ACTM-1146NM47-RC) ISO 9001:2008 certified Aeroflex Signal & Control Solutions Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 Sales Phone: (732) 460-0212 [email protected] www.aeroflex.com/Microwave www.aeroflex.com/ASCS Aeroflex Signal & Control Solutions reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex Signal & Control Solutions. All rights reserved. Revision Date: 11/4/2013 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.