ACTP-1799 High Frequency Tunnel Detector Data Sheet Revision Date: 12/23/2015 The most important thing we build is trust DESCRIPTION: Exceptional thermal stability and flatness vs. frequency characterize these tunnel detectors from Cobham Signal & Control Solutions, Inc. Several models are available which operate over all or a portion of the frequency range of 18 to 40 GHz. The temperature stability is +/- 0.3dB over the range of -65°C to +100°C. The typical output impedance is 115. This allows for extremely fast video response when operating in the square law range, typically -20dBm or lower. The input power rating is +14dBm maximum. SPECIFICATIONS: Parameter Specification Unit of Measure Frequency Range (min) 18 - 26 GHz Flatness v.s. Frequency +/- 0.5 dB 4 mV 9.1 pF Minimum Output Voltage Nominal Video Capacitance OUTLINE DRAWING: FEATURES: • Contains hermetically sealed modules, internal RF matching, DC return, and RF bypass capacitor • Input impedance matching • Models may be chosen for broadband RF performance of for optimized narrow bands STANDARD CASE STYLE C36 (Optional Case Styles – C37, M61) Revised Date: 12/23/2015 (732) 460-0212 www.cobham.com/CSCS 1 ACTP-1799 High Frequency Tunnel Detector NOTES: ENVIRONMENTAL SPECIFICATIONS*: Maximum input power: +14 dBm (3 dB guardband for +17 dBm possible burnout) MIL-E-5400, MIL-STD-202, MIL-E-16400 Sensitivity is measured into an open circuit load (>10k ohm). Storage Temp: -65°C to +100°C Operating Temp: -55°C to +100°C Humidity: MIL-STD-202F, M103, Cond B SCREENING: Shock: MIL-STD-202F, M213, Cond B Internal Visual per MIL-STD-883, Method 2017 Altitude: MIL-STD-202F, M105, Cond B Temperature Cycle: -65°C to +100°C, 10 cycles Vibration: MIL-STD-202F, M204, Cond B OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534): Thermal Shock: MIL-STD-202F, M107, Cond A * Compliant by design, verification optional Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 PART NUMBER ORDERING INFORMATION: Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACTP-1799N) Add desired case style suffix: “C36” (Ex: ACTP-1799NC36) Add “R” suffix: Reverse Connector Configuration (Ex: ACTP-1799NC36R) (SMA Female Input/SMA Male Output) Add “-RC” suffix: RoHS-compliant (Ex: ACTP-1799NC36 -RC) ISO 9001:2008 and AS9100 certified For further information please contact: Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales representative to verify that the information in this data sheet is current before using this product. CSCS does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of CSCS or of third parties. Cobham Signal & Control Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Phone: (732) 460-0212 Fax: (732) 460-0214 [email protected] Copyright 2015, Cobham Signal & Control Solutions. All rights reserved. Revised Date: 12/23/2015 (732) 460-0212 www.cobham.com/CSCS 2