QQ-17 Digitally Controlled Analog Phase Shifter Data Sheet Revision Date: 12/19/2015 The most important thing we build is trust DESCRIPTION: Cobham Signal & Control Solutions’ digitally controlled Phase Shifters vary the phase of a Microwave signal in responce to a TTL compatible logic input signal. The unit consists of an analog phase shifter, series PQ, plus a digital to analog converter. A balanced Strip line configuration keeps the VSWR and amplitude change to a minimum for all values of phase. Standard units operate with 8 BITS allowing 256 discrete values of phase. SPECIFICATIONS: Parameter Specification Unit of Measure 0.25 – 0.5 GHz Phase Shift 360 Degrees Insertion Loss (Max) 4.5 dB Amplitude Ripple (Max) 1.25 ±dB VSWR (Max) 2.0:1 Ratio Frequency Range (min) Outline A’ B’ C’ D’ E’ F’ G’ 2 7.75 2.50 N/A 2.30 7.25 0.75 4PLCS OUTLINE DRAWING: FEATURES: • 8 bit Digital logic standard • Octave bands up to 18 GHz • RF power operation 5 mW peak/CW, RF power survival 100 mW peak/CW • Bias connection using pin or connector options • Custom configurations available `A' `E' 1.00 PIN 9 .25 RF POWER/LOGIC PIN 1 PIN 15 .19 `D' PIN 8 .10 `B' `F' .125 DIA THRU `G' MTG HOLES .38 2 PLS `C' OUTLINE CASE STYLE QQ Revised Date: 12/19/2015 (732) 460-0212 www.cobham.com/CSCS 1 QQ-17 Digitally Contolled Analog Phase Shifter NOTES: ELECTRICAL SPECIFICATION: 1. The voltages required are ±15V @ 50mA. DC Supply: +15 V ± 0.5 V @ +50 mA -15 V ± 0.5 V @ -50 mA Control: 8 Bits command Logic Control: TTL/HMOS 2. The Phase shift varies with frequency at any voltage setting. This variation, referenced to 0° at logic 0 for each frequency, is approximately ±15% for octave models, 10% for models with 25% bandwidth, and ±7.5% for models with 10% bandwidth. 3. Switching speed on all models is 200 nS. ENVIRONMENTAL SPECIFICATIONS*: MIL-E-5400, MIL-STD-202, MIL-E-16400 4. Monotonicity is Guaranteed. 5. Least Significant BIT = Total Phase Shift divided by the number of steps. 8 BITS = 256 steps. MECHANICAL SPECIFICATIONS: Operating Temp: -40°C to +71°C Storage Temp: -65°C to +150°C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Case Style: QQ Outline Connectors: SMA Female per MIL-C-39012 Connector Control: 15 Pin D Mounting: ø0.10” through holes (4) places Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A * Compliant by design, verification optional CUSTOM OPTIONS – SCREENING: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65 °C to +100 °C, 10 cycles Hermetically-sealed units are fine and gross leak checked per MIL-STD-883, Method 1014. Optional High-Rel screening available upon request. Contact the factory to discuss your screening requirements. CONTACT THE FACTORY • Gray epoxy paint per MIL-C-22750 • Video transient suppression • ECL logic input • Phase and amplitude tracking • Other frequency ranges available from 1 MHz to 26 GHz • Reversed logic • High rel screening ISO 9001:2008 and AS9100 certified For further information please contact: Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales representative to verify that the information in this data sheet is current before using this product. CSCS does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of CSCS or of third parties. Cobham Signal & Control Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Phone: (732) 460-0212 Fax: (732) 460-0214 [email protected] Copyright 2015, Cobham Signal & Control Solutions. All rights reserved. Revised Date: 12/19/2015 (732) 460-0212 www.cobham.com/CSCS 2