SF51_9 PRV : 50 - 1000 Volts Io : 5.0 Amperes Features • High current capability • High surge current capability • High reliability • Low reverse current • Low forward voltage drop • Super fast recovery time • RoHS compliant package Mechanical Data • Case : DO-201AD Molded plastic • Epoxy : UL94V-O rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed • Polarity : Color band denotes cathode end • Mounting position : Any • Weight : 1.10 grams Packing & Order Information Graphic symbol 1,250/T MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20% Symbol Rating SF51 Recurrent Peak Reverse Voltage (Max.) Maximum RMS Voltage Maximum DC Blocking Voltage SF52 SF53 SF54 SF55 SF56 SF57 SF58 SF59 Unit VRRM 50 100 150 200 300 400 600 800 1000 V VRMS 35 70 105 140 210 280 420 560 700 V VDC 50 100 150 200 300 400 600 800 1000 V Maximum Average Forward Current 0.375"(9.5mm) IF(AV) 5.0 A Lead Length Ta = 55 °C Publication Order Number: [SF51_9] ©Bruckewell Technology Corporation Rev. A -2014 SF51_9 PRV : 50 - 1000 Volts Io : 5.0 Amperes Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20% Symbol Rating SF51 SF52 SF53 SF54 SF55 SF56 SF57 SF58 SF59 Unit Maximum Peak Forward Surge Current 8.3ms Single half sine wave IFSM 135 A Superimposed on rated load (JEDEC Method Maximum Peak Forward Voltage at IF = 5.0 A Maximum DC Reverse Current Tj = 25 °C at Rated DC Blocking Voltage Tj = 100 °C Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) Junction Temperature Range Storage Temperature Range VF 0.95 1.7 4.0 V IR 10 mA IR(H) 500 mA Trr 35 Ns CJ 50 pF TJ - 65 to + 150 °C TSTG - 65 to + 150 °C Notes (1) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC Publication Order Number: [SF51_9] ©Bruckewell Technology Corporation Rev. A -2014 SF51_9 PRV : 50 - 1000 Volts Io : 5.0 Amperes ■RATING AND CHARACTERISTIC CURVES ( GROA - GROM ) FIG.1 –REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM FIG.2 – DERATING CURVE FOR OUTPUT FIG.3 – MAXIMUM NON-REPETITIVE PEAK FORWARD RECTIFIED CURRENT SURGE CURRENT FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS Publication Order Number: [SF51_9] ©Bruckewell Technology Corporation Rev. A -2014 SF51_9 PRV : 50 - 1000 Volts Io : 5.0 Amperes Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [SF51_9] ©Bruckewell Technology Corporation Rev. A -2014