Preliminary_SBLF3080C Low VF Schottky Barrier Rectifier Features • Low forward voltage drop, low power losses • High efficiency operation • Solder bath temperature 275 °C max. 10 s, per JESD 22-B106 • RoHS compliant package Mechanical Data • Case: ITO-220AB • Molding compound meets UL 94 V-0 flammability • RoHS compliant, and commercial grade • Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 • Polarity: As marked Packing & Order Information Graphic symbol 50/Tube ; 1,000/Box MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol SBLF3080C Unit Maximum repetitive peak reverse voltage VRRM 80 V Working peak reverse voltage VRWM 80 V Maximum DC blocking voltage VDC 80 V Maximum average forward rectified current per device per diode IF(AV) 30 A 15 Peak forward surge current 8.3ms single half sine-wave superimposed IFSM 180 A dv/dt 10000 V/μs TJ -55 to +175 °C TSTG -55 to +175 °C on rated load (JEDEC Method) Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range Publication Order Number: [SBLF3080C] © Bruckewell Technology Corporation Rev. A -2014 Preliminary_SBLF3080C Low VF Schottky Barrier Rectifier Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Instantaneous forward voltage at IF=15A, Tj=25°C at IF=15A, Tj=125°C Maximum reverse current per leg VF Value Typical Max 0.80 0.82 0.65 0.72 Unit V 0.5 m’A 30 m’A Symbol Value Unit Rthjc 5.0 °C/W Tj=25°C IR at working peak reverse voltage Tj=125°C Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Notes: (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Publication Order Number: [SBLF3080C] © Bruckewell Technology Corporation Rev. A -2014 Preliminary_SBLF3080C Low VF Schottky Barrier Rectifier Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [SBLF3080C] © Bruckewell Technology Corporation Rev. A -2014