Preliminary_SF3060PT Super Fast Rectifiers Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Dual rectifier construction, positive center-tap • Planar chip construction • Low forward voltage, high current high current capability • Low thermal resistance, low power loss • High temperature soldering guaranteed:250 °C, 0.1"(4.06mm) from case for 10 seconds • RoHS compliant package Mechanical Data • Case: TO-247AD • Molding compound meets UL 94 V-0 flammability • RoHS compliant, and commercial grade Graphic symbol • Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 • Polarity: As marked Packing & Order Information 50/Tube ; 1,000/Box MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol SF3060PT Unit Maximum repetitive peak reverse voltage VRRM 600 V Working peak reverse voltage VRWM 420 V Maximum DC blocking voltage VDC 600 V IF(AV) 30 A IFSM 300 A Junction Capacitance Cj 145 pF Operating junction temperature range TJ -55 to +150 °C TSTG -55 to +175 °C Maximum average forward rectified current TA=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Storage temperature range Publication Order Number: [SF3060PT] © Bruckewell Technology Corporation Rev. A -2014 Preliminary_SF3060PT Super Fast Rectifiers Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Instantaneous forward voltage per diode at IF=15A, TA=25°C Maximum reverse current per leg VF Value Typical Max 2.5 2.3 Tj=25°C Unit V 10 uA 500 uA 35 ns IR at working peak reverse voltage Tj=125°C Reverse Recovery Time IF=0.5A,IR=1A, Irr=0.25A Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Trr Symbol Value Unit Rthja 1.2 °C/W Notes: (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms (3) Cj Measured at 1.0MHz and reverse voltage of 4.0V DC. Publication Order Number: [SF3060PT] © Bruckewell Technology Corporation Rev. A -2014 Preliminary_SF3060PT Super Fast Rectifiers Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [SF3060PT] © Bruckewell Technology Corporation Rev. A -2014