BL1200W Schottky Barrier Diode Features • Low forward voltage • Fast switching time • Surface mount package ideally suited for automatic insertion Applications Schottky barrier detector and switching diodes Mechanical Data • Case: SOD-123F Plastic • Case Material: “Green” molding compound, UL • Flammability classification 94V-0, (No Br. Sb. CI) • Moisture Graphic symbol • Sensitivity: Level 1 per J-STD-020D • Lead Free in RoHS 2002/95/EC Compliant Packing & Order Information 3,000/Reel MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol BL1200W Unit Maximum repetitive peak reverse voltage VRRM 200 V Working peak reverse voltage VRWM 200 V Maximum DC blocking voltage VDC 200 V IF(AV) 1 A IFSM 50 A Rθja 88 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C Maximum average forward rectified current Total device Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Thermal resistance,junction to ambient air Operating junction temperature range Storage temperature range Publication Order Number: [BL1200W] © Bruckewell Technology Corporation Rev. A -2014 BL1200W Schottky Barrier Diode Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Value Typical Max Instantaneous forward voltage at IF=1A, Tj=25°C VF Maximum reverse current IR 100 u’A Trr 5.0 ns at VR=200V Reverse recovery time (IF=IR=10mA Irr=0.1*IR RL=100Ω) 0.82 Unit V Note: Mount on FR4, P.C.B Publication Order Number: [BL1200W] © Bruckewell Technology Corporation Rev. A -2014 BL1200W Schottky Barrier Diode ■RATING AND CHARACTERISTIC CURVES FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.3-MAXIMUM NON-REPETITIVE FORWARD FIG.2-TYPICAL FORWARD CHARCTERISTICS SURGE CURRENT FIG.4-TYPICAL JUNCTION CAPACITANCE Publication Order Number: [BL1200W] FIG.5-TYPICAL REVERSE CHARACTERISTICS © Bruckewell Technology Corporation Rev. A -2014 BL1200W Schottky Barrier Diode Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [BL1200W] © Bruckewell Technology Corporation Rev. A -2014