'>Ϭϴ ϰ'>^^W^^/sdZ/'Zd/&/ZͲϴϬϬs PRIMARY CHARACTERISTICS VRRM 800V IO 4A VF 1.0 I2t 70A2S TJ,Max 150℃ GBL PACKAGE Marking : GBL08 ~ ~ V:Product Lines Y:1-digit BC year code, 4-2014,5-2015…etc M:Month, EX : 1-1,2-2,---10-O,11-N,12-D FEATURES MECHANICAL DATA Ideal for printed circuit board Case：Molded plastic,GBL Surge overload rating: 130 amperes Polarity：Shown above peak Terminals :Plated terminals, solderable per MIL-STD-750,Method Moisture Sensitivity Level 1 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL GBL08 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 800 Volts Maximum RMS Bridge Input Voltage VRMS 560 Volts VDC 800 Volts IO 4.0 Amps I FSM 130 Amps It 70 AS Maximum DC Blocking Voltage o Maximum Average Forward Output Current at T C = 100 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 2 Current Squared Time T J ,T S T G Operating and Storage Temperature Range Typical Junction Capacitance (Note) -55 to + 150 CJ 40 SYMBOL GBL08 VF 1.0 2 0 C pF ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridgeat Element at 2.0A DC Maximum Reverse Current at Rated @T A = 25 oC Dc Blocking Voltage per element @T A = 125 oC IR Volts 5.0 uAmps 0.5 mAmps NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts 201ϲ.0ϰ www.willas.com.tw Rev.s0Ϯ '>Ϭϴ ϰ'>^^W^^/sdZ/'Zd/&/ZͲϴϬϬs RATING AND CHARACTERISTIC CURVES ( GBL08 ) PEAK FORWARD SURGE CURRENT, (A) 300 250 8.3ms Single Half Sine-Wave (JEDEC Method) 200 150 100 50 0 1 2 5 10 20 NUMBER OF CYCLES AT 60Hz 50 100 AVERAGE FORWARD OUTPUT CURRENT, (A) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE 5 4 3 2 60 Hz RESISTIVE OR INDUCTIVE LOAD 1 0 0 INSTANTANEOUS REVERSE INSTANTANEOUS FORWARD CURRENT, (A) 150 10 100 TJ = 25 10 Pulse Width = 300us 1% Duty Cycle 1 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) 201ϲ.0ϰ ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS .1 .6 50 100 CASE TEMPERATURE, ( 2.0 TJ = 100 1.0 .1 TJ = 25 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) www.willas.com.tw Rev.s0Ϯ '>Ϭϴ ϰ'>^^W^^/sdZ/'Zd/&/ZͲϴϬϬs Outline Drawing GBL .827(21.0) .768(19.5) ~ ~ .453(11.5) .401(10.2) .118(3.0) .078(2.0) .098(2.5) .071(1.8) .146(3.7) .126(3.2) .079(2.3) .063(1.6) .740(18.8) .681(17.3) .051(1.30) .031(0.80) .047(1.2) .031(0.8) .028(0.7) .012(0.3) .209(5.3) .189(4.8) Dimensions in inches and (millimeters) Rev.E 201ϲ.0ϰ www.willas.com.tw Rev.s0Ϯ '>Ϭϴ ϰ'>^^W^^/sdZ/'Zd/&/ZͲϴϬϬs Ordering Information: Device PN GBL08 - (1)G(2)-WS Packing Tube Packing:25pcs/Tube; 1350pcs/Box Note: 1. Packing code: Empty is Tube Packing 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" . ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 201ϲ.0ϰ www.willas.com.tw Rev.s0Ϯ