RECTRON RS206M

RS201M
RECTRON
THRU
SEMICONDUCTOR
TECHNICAL SPECIFICATION
RS207M
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere
FEATURES
* Ideal for printed circuit board
* Mounting position: Any
MECHANICAL DATA
* UL listed the recognized component directory, file #E94233
* Epoxy: Device has UL flammability classification 94V-O
RS-2M
.807 (20.5)
.768 (19.5)
.043 (1.1)
.035 (0.9)
.047 (1.2)
.031 (0.8)
.106
.091
.740
.701
.079 (2.0)
.063 (1.6)
.098 (2.5)
.083 (2.1)
(2.7)
(2.3)
(18.8)
(17.8)
.453 (11.5)
.413 (10.5)
.146 (3.7)
.130 (3.3)
.024 (0.6)
.016 (0.4)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
.209 (5.3) .209 (5.3)
.193 (4.9) .193 (4.9)
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.209 (5.3)
.193 (4.9)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)
RATINGS
SYMBOL
RS201M RS202M RS203M RS204M RS205M RS206M RS207M UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
560
700
Volts
VDC
50
100
200
400
600
800
1000
Maximum DC Blocking Voltage
Maximum Average Forward Output Current T A = 50 oC
IO
Volts
2.0
Amps
I FSM
50
Amps
CJ
15
Typical Thermal Resistance per leg (NOTE 2)
R θJA
37
(NOTE 3)
RθJC
11
TJ
-55 to + 150
0
C
T STG
-55 to + 150
0
C
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note1)
Operating Temperature Range
Storage Temperature Range
pF
0
C/W
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Forward Voltage Drop per Bridgeat
Element at 2.0A DC
RS201M RS202M RS203M RS204M RS205M RS206M RS207M UNITS
VF
Maximum Reverse Current at Rated
@T A = 25 C
Dc Blocking Voltage per element
@T A = 100 o C
1.1
5.0
o
IR
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2. Unit case mounted on 1.6 x 1.6 x 0.06” thick (4.0 x 4.0 x 0.15cm) Al. Plate
3. Units mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper pads and 0.375” (9.5mm) lead length
4. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
0.5
Volts
uAmps
mAmps
2005-3
REV:A
RATING AND CHARACTERISTIC CURVES ( RS201M THRU RS207M )
FIG. 2 - TYPICAL FORWARD CURRENT
DERATING CURVE
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD
2.0
60
AVERAGE FORWARD CURRENT, (A)
PEAK FORWARD SURGE CURRENT, (A)
SURGE CURRENT
50
8.3ms Single Half Sine-Wave
(JEDED Method)
40
30
20
10
0
0
2
4
6 10
20 40 60
NUMBER OF CYCLES AT 60Hz
1.5
1.0
60 Hz RESISTIVE
OR INDUCTIVE
LOAD
.5
0
100
20
50
80
110 140
170
200
AMBIENT TEMPERATURE, ( )
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS
10
1.0
0.1
TJ = 25
Pulse Width = 300us
1% Duty Cycle
.01
.4
INSTANTANEOUS REVERSE CURRENT, (uA)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
10
6
4
2
1.0
.6
TJ = 25
.2
.1
.06
.02
.01
.5
.6
.7
.8
.9
1.0 1.1 1.2
INSTANTANEOUS FORWARD VOLTAGE, (V)
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
RECTRON