B-XS-W5 Series 0.5 Watt SIP4 Single Output DC/DC-Converter SELECTION GUIDE Model Input Voltage (V) Output Voltage (V) Output Current (MA) Efficiency (%) Max. Capacitive Load B0505XS-W5 5 5 100 80 470μF B1205XS-W5 12 5 100 82 470μF Industry Standard Pin out B0512XS-W5 5 12 42 83 150μF 1kVDC Isolation B1212XS-W5 12 12 42 86 150μF UL94V-0 Package Material B0515XS-W5 5 15 33 84 150μF Optional Continuous Short Circuit Protected B1215XS-W5 12 15 33 87 150μF FEATURES ◆ ◆ ◆ ◆ add “P” for Continuous Short Circuit Protection,e.g.:B0505XS-W5 P Protection,e.g.:B0505XS-W5P Fully Encapsulated ◆ Custom Solutions Available ◆ Efficiency to 87% ◆ 3 year Warranty ◆ Specifications Input Voltage Range MODEL SELECTION Output Voltage Accuracy B①05②05③X④ S⑤-W5⑥ ①Product Series ③Output Voltage ⑤SIP Package ±10% ②Input Voltage ④Fixed Input ⑥Rated Power ±5% Line Voltage Regulation 1.2%/1% of Vin typ.. Load Voltage Regulation (10% to 100% full load) 10% max. / 4% typ.. Output Ripple and Noise (20MHz limited) 100mVp-p max. Operating Frequency 20kHz min. / 54kHz typ. Efficiency at Full Load 70% min. / 85% typ. APPLICATIONS Efficiency at 50%l Load 65% min. / 80% typ. The B-XS-W5 DC/DC converters are typically used in general purpose low power isolation and voltage matching applications, and feature a full industrial operating temperature range of -40℃~ +85℃ without derating. Minimum Load = 0% Specifications valid for 10% minimum load only. Isolation Voltage (tested for 1 second) 1000VDC (rated for 1 minute) 500VAC / 60Hz Isolation Capacitance 20pF min. / 75pF max. Isolation Resistance Derating-Graph(Ambient Temperature) 10 GΩmin. Short Circuit Protection 1 Second Suffix "P" Continuous Operating Temperature Range (free air convection) -40°C to +85°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight 1.4g Packing Quantity 42 pcs per Tube MTBF (+25°C) (+85°C) } using MIL-HDBK 217F 985 x 103hours using MIL-HDBK 217F 200 x 103hours Detailed Information see Application Notes chapter "MTBF" ℃, nominal input voltage, full load and after warm-up ) (measured at TA= 25 25℃ add “P” for Continuous Short Circuit Protection,e.g.:B0505XS-W5 P Protection,e.g.:B0505XS-W5P MICRODC RESERVES THE COPYRIGHT http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 B-XS-W5 Series Typical Characteristics Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter . Certifications IEC62321:2008 BSTDG13061091RC-4 E0611042E-1 Package Style and Pinning (mm) RoHS COMPLIANT INFORMATION Microdc Professional Power Module,Inc. This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C Tel:0086-20-86000646 E-mail:[email protected] for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Website:http://www.microdc.cn Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are Microdc Professional Power module,Inc.makes no representation that backward compatible with Sn/Pb soldering systems. the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or REACH COMPLIANT INFORMATION future patent rights. Specifications are subject to change without notice. This series has proven that this product does not contain harmful chemicals, it also has harmful chemical ©2010 Microdc Professional Power Module, Inc. Guangzhou substances through the registration, inspection and approval. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2