WRA-YD-12W&WRB-YD -12W Series 12W, WIDE INPUT, ISOLATED & REGULATED DUAL&SINGLE OUTPUT DC-DC CONVERTER SELECTION GUIDE Input Output Efficiency3 Order code Voltage(VDC) Current(mA) Voltage Current(mA) (%.Typ.) FEATURES ◆12 WATTS OUTPUT POWER ◆OUTPUT CURRENT UP TO 3.5A ◆STANDARD 31.8×20.3×10.2MM ◆HIGH EFFICIENCY UP TO 88% ◆2:1 WIDE INPUT VOLTAGE RANGE ◆FIVE-SIDED CONTINUOUS SHIELD ◆FLXED SWITCHING FREQUENCY (400KHz) ◆STANDARD 24 PIN DIP PACKAGE ◆I/O ISOLATION 1500 VDC ◆CE MARK MEETS 2009/11/12 ◆COMPLIANT TO RoHS BSTDG13061091RC-4 APPLICATIONS The WRA(B)-YD-12W series offer 12 watts of output power From a package in an IC compatible 24pin DIP configuration.WRA(B)-YD-12W series have 2:1 wide input voltage of 9-18,18-36 and 36-72VDC. The WRA(B)-YD-12W have features 1500VDC of isolation,short circuit protection and as well as five sided shielding. Nominal Range No load2 (VDC) Max. Min. WRB1202YD-12W 12 9-18 50mA 2.5 3500 0mA 82 WRB1203YD-12W 12 9-18 60mA 3.3 3500 0mA 84 WRB1205YD-12W 12 9-18 53mA 5.1 2400 0mA 86 WRB1212YD-12W 12 9-18 15mA 12 1000 0mA 86 WRB1215YD-12W 12 9-18 17mA 15 800 0mA 86 WRA1205YD-12W 12 9-18 24mA ±5 ±1200 0mA 82 WRA1212YD-12W 12 9-18 19mA ±12 ±500 0mA 87 WRA1215YD-12W 12 9-18 24mA ±15 ±400 0mA 87 WRB2402YD-12W 24 18-36 36mA 2.5 3500 0mA 83 WRB2403YD-12W 24 18-36 36mA 3.3 3500 0mA 85 WRB2405YD-12W 24 18-36 35mA 5.1 2400 0mA 87 WRB2412YD-12W 24 18-36 16mA 12 1000 0mA 87 WRB2415YD-12W 24 18-36 17mA 15 800 0mA 87 WRA2405YD-12W 24 18-36 15mA ±5 ±1200 0mA 83 WRA2412YD-12W 24 18-36 15mA ±12 ±500 0mA 88 WRA2415YD-12W 24 18-36 18mA ±15 ±400 0mA 88 WRB4802YD-12W 48 36-72 10mA 2.5 3500 0mA 83 WRB4803YD-12W 48 36-72 14mA 3.3 3500 0mA 85 WRB4805YD-12W 48 36-72 23mA 5.1 2400 0mA 87 WRB4812YD-12W 48 36-72 11mA 12 1000 0mA 87 WRB4815YD-12W 48 36-72 5mA 15 800 0mA 87 WRA4805YD-12W 48 36-72 6mA ±5 ±1200 0mA 83 WRA4812YD-12W 48 36-72 6mA ±12 ±500 0mA 88 WRA4815YD-12W 48 36-72 6mA ±15 ±400 0mA 88 NOTE(Apply to this data): 1.MIL-HDBK-217F Notice2 @Ta=25℃,Full load(ground,Benign,controlled environment). 2.Typical value at nominal input voltage and no load. 3.Typical value at nominal input voltage and full load. 4.The ON/OFF control pin voltage is referenced to -INPUT. 5.The WRA(B)-YD-12W series can meet EN55022 Class a with parallel an external capacitor to the input pins. Recommend: 12Vin:6.8µF/50V. 24Vin:4.7µF/50. 48Vin:2.2µF/100V. 6.An external input filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5. The filter capacitor Power Mate suggest:Nippon chemi-con KY series,220/100V,ESR 48MΩ. WRB4805YD-12W Derating Curve PRODUCT ID DESCRIPTION WRB4805YD-12W Efficiency VS Input Voltage WRB4805YD-12W Efficiency VS Output Load MICRODC RESERVES THE COPYRIGHT http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 WRA-YD-12W&WRB-YD -12W Series ℃ otherwise noted) TECHNICAL SPECIFICATION(All specifications are typical at nominal input,full load and 25 25℃ Output Specifications Input Specifications Output power 12Watts,max. Voltage accuracy Input voltage range 12VDC nominal input 24VDC nominal input 48VDC nominal input ±1.2% Minimum load 0% Line regulation LL to HL at Full Load Load regulation No Load to Full Load Single ±0.2% Dual ±0.5% Single(DIP) ±0.5% Dual (DIP) ±1% (2.5Vo only) ±1% Cross regulation(Dual) Asymmetrical load 25%/100% FL Ripple and noise 20MHz bandwidth ±5% See table Temperature coefficient ±0.02%/℃,max. Transient response recovery time 25% load step change Over voltage protection zener diode clamp(only single) Over load protection 250 2.5VDC output 3.3VDC output 5.1VDC output 12VDC output 15VDC output % of FL at nominal input Short circuit protection 3.9VDC 3.9VDC 6.2VDC 15VDC 18VDC 150% Continuous,automatics recovery 9-18VDC 18-36VDC 36-72VDC Input filter Pi type Input surge voltage 12VDC input 24VDC input 48VDC input 36VDC 100mS,max 50VDC 100mS,max 100VDC 100mS,max Input reflected ripple current 20mAp-p Start up time Nominal input and power up 450mS constant resistive load Start-up voltage 12VDC input 9VDC 24VDC input 18VDC 48VDC input 36VDC Shutdown voltage 12VDC input 8VDC 24VDC input 16VDC 48VDC input 33VDC Remote ON/OFF 4 DC-DC ON Open or 3.0V<Vr<12V (Positive logic) DC-DC-OFF Short or 0V<Vr<1.2V Input current of remote control pin Nominal input -0.5mA ~ 0.5mA Remote off state input current Nominal input 2.5mA Environmental Specifications Operating ambient temperature -40℃ ~ +85℃ (with derating) Maximum case temperature Storage temperature range General Specifications Efficiency See table Isolation voltage Input to Output 100℃ 1500VDC,min. 1minute Thermal impedance -55℃ ~ +105℃ Nature convection 20℃/Watt Thermal shock MIL-STD-810F Isolation resistance 109 ohms,min. Vibration MIL-STD-810F Isolation capacitance 1200pF, max. Relative humidity 5% to 95% RH Switching frequency 400KHz ± 10% Approvals and standard EMC Characteristics IEC60950-1,UL60950-1,EN60950-1 EMI5 EN55022 Case material Nickel-coated copper ESD EN61000-4-2 Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight MTBF1 18g(0.62oz) MIL-HDBK-217F 7.575x105 hrs Recommended EMI Filter Air ± 8KV perf.Criteria A Contact ± 6KV Radiated immunity Fast transient 6 Surge6 EN61000-4-3 EN61000-4-4 EN61000-4-5 Conducted immunity EN61000-4-5 10V/m ± 2KV perf.Criteria A perf.Criteria A ± 1KV perf.Criteria A 10 Vr.m.s perf.Criteria A Recommended EMI Filter Recommended EN55022 Class B Filter Circuit Layout http://www.microdc.cn Class A Recommended Filter for EN55022 Class B Compliance Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 3 WRA-YD-12W&WRB-YD -12W Series OUTLINE DIMENSIONS & FOOTPRINT DETAILS RECOMMENDED FOOTPRINT MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT Top view grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) TUBE OUTLINE DIMENSIONS Note: Unit:mm[inch] Pin section tolerances:±0.10mm[±0.004inch] General tolerances:±0.25mm[±0.010inch] FOOTPRINT DETAILS Pin Single Dual 2、3 GND GND 9 NC 0V 11 NC -Vo 14 +Vo +Vo 16 0V 0V 22、23 Vin Vin Note: Unit :mm[inch] General tolerances:±0.50mm[±0.020inch] L=530mm[20.866inch] Tube Quantity: 15pcs L=220mm[8.661inch] Tube Quantity: 6pcs NC:No connection When the environment temperature is higher than 71 71℃,, the product output power should be less then 60% of the rated power. No parallel connection or plug and play. Use dual output simultaneously,forbid pening output pin (0V) to use as single output. Note: 1. The load shouldn't be less than 10%, otherwise ripple will increase dramatically. 2. Operation under 10% load will not damage the converter; However, they may not meet all specification listed. 3. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 4. In this data sheet, all the test methods of indications are based on corporate standards. 5. Only typical models listed, other models may be different, please contact our technical person for more details. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3