IB-XLS-1W

IB-XLS-1W&IB-XLD-1W Series
FIXED INPUT,ISOLATED&REGULATED Single Output DC/DC Converter
SELECTION GUIDE
Input
FEATURES
RoHS compliant
◆
Efficiency up to 83%
◆
SIP/DIP Package
◆
Wide temperature performance at full 1 Watt
◆
load,-40°C to 85°C
UL 94V-0 package material
◆
No heatsink required
◆
Small Footprint
◆
Industry standard pinout
◆
Power sharing on output
◆
1KVDC isolation
◆
Continuous Short Circuit Protection
◆
Internal SMD construction
◆
No external components required
◆
MTTF up to 1.8 million hours
◆
MODEL SELECTION
①
②
③
④
⑤
⑥
IB 05 05 X LS -1W
①Product Series
③Output Voltage
⑤SIP Package
②Input Voltage
④Fixed Input
⑥Rated Power
Output
Switching
Frequency
(KHz,Typ)
Nominal
Range
IB0505XLD-W25
5
4.75-5.25
5
50
5
68
80
IB0505XLD-W75
5
4.75-5.25
5
150
15
68
80
IB0505XLD-1W
5
4.75-5.25
5
200
20
71
80
IB0509XLD-1W
5
4.75-5.25
9
111
12
70
75
IB0512XLD-1W
5
4.75-5.25
12
83
9
71
83
IB0515XLD-1W
5
4.75-5.25
15
67
7
73
67
IB0505XLS-W25
5
4.75-5.25
5
50
5
68
80
IB0505XLS-W75
5
4.75-5.25
5
150
15
68
80
IB0505XLS-1W
5
4.75-5.25
5
200
20
68
70
IB0509XLS-1W
5
4.75-5.25
9
111
12
70
75
IB0512XLS-1W
5
4.75-5.25
12
83
9
71
69
IB0515XLS-1W
5
4.75-5.25
15
67
7
73
80
IB1205XLD-1W
12
11.4-12.6
5
200
20
68
85
IB1209XLD-1W
12
11.4-12.6
9
111
12
72
74
IB1212XLD-1W
12
11.4-12.6
12
83
9
70
71
IB1215XLD-1W
12
11.4-12.6
15
67
7
74
65
IB1205XLS-1W
12
11.4-12.6
5
200
20
68
68
IB1209XLS-1W
12
11.4-12.6
9
111
12
72
67
IB1212XLS-1W
12
11.4-12.6
12
83
9
70
65
IB1215XLS-1W
12
11.4-12.6
15
67
7
74
66
IB1505XLS-1W
15
14.25-15.75
5
200
20
70
69
IB1509XLS-1W
15
14.25-15.75
9
111
12
71
75
IB1512XLS-1W
15
14.25-15.75
12
83
9
71
74
IB1515XLS-1W
15
14.25-15.75
15
67
7
72
72
IB2405XLD-1W
24
22.8-25.2
5
200
20
68
73
IB2409XLD-1W
24
22.8-25.2
9
111
12
68
71
IB2412XLD-1W
24
22.8-25.2
12
83
9
73
70
IB2415XLD-1W
24
22.8-25.2
15
67
7
75
70
IB2405XLS-1W
24
22.8-25.2
5
150
15
68
80
IB2409XLS-1W
24
22.8-25.2
9
111
12
68
74
IB2412XLS-1W
24
22.8-25.2
12
83
9
73
60
IB2415XLS-1W
24
22.8-25.2
15
67
7
75
62
Voltage(VDC)
Current(MA)
Efficiency
(%,Typ)
Voltage
(VDC)
Order code
Max
Min
APPLICATIONS
The IB_XLS-1W&IB_XLD-1W series are
specially designed for applications where a
group of polar power supplies are isolated from
the input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) where the voltage of the input power supply
is fixed (voltage variation ≤±5%);
2) where isolation is necessary between input
and output (isolation voltage ≤1000VDC);
3) where the regulation of the output voltage
and the output ripple noise are demanded.
OUTPUT SPECIFICATIONS
Parameter
Test conditions
Output power
Min
Typ.
0.1
Max.
Units
1
W
Line regulation
For Vin change of ±5%
±0.25
%
Load regulation
10% to 100% full load
±1
%
100% full load
±3
%
Output voltage accuracy
Temperature drift
100% full load
0.03
%/°C
10
20
MV p-p
20MHz Bandwidth
50
75
MV p-p
Full load,nominal input
100
Output Ripple*
20MHz Bandwidth
Output Noise*
Switching frequency
Khz
* Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power
Converter section, application notes.
MICRODC RESERVES THE COPYRIGHT
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
IB-XLS-1W&IB-XLD-1W Series
APPLICATION NOTE
TEMPERATURE CHARACTERISTICS
Parameter
Conditions
Min.
Typ.
Max.
Units
95
%
80
°C
125
°C
25
°C
300
°C
Storage humidity range
Operating temperature
-40
Storage temperature
Lead temperature
-55
1.5mm from case for 10 seconds
15
Temp.rise at full load
Cooling
Free air convection
Case material
Plastic(UL94-V0)
Requirement on output lo ad
To ensure this module can operate efficiently and
reliably, During operation,the minimum output load is not
less than 10% of the full load,and that this product
should never be operated under no load!If the actual
output power is very small, please connect a resistor
with proper resistance at the output end in parallel to
increase the load,or use our company's products with
a lower rated output power(IB_XLD -W25/IB_XLS-W25
series).
Recommended circuit
Continuous
Short circuit protection
1*
MTBF
S
3500
Weight
K hours
2.1
g
If you want to further decrease the input/output ripple,
an "LC" filtering network may be connected to the input
and output ends of the DC/DC converter, see (Figure 1).
*Supply voltage must be discontinued at the end of short circuit duration.
TYPICAL CHARACTERISTICS
Temperature Derating Graph
It should also be noted that the inductance and the
frequency of the "LC" filtering network should be
staggered with the DC/DC frequency to avoid mutual
interference. However, the capacitance of the output
filter capacitor must be proper. If the capacitance is too
big, a startup problem might arise. For every channel of
output, provided the safe and reliable operation is
ensured, the greatest capacitance of its filter capacitor
sees (Table 1).
OUTLINE DIMENSIONS & PIN CONNECTIONS
IB
IB--XLS-1W
SIZE Graph
IB
IB--XLD-1W
EXTERNAL CAPACITOR TABLE (TABLE 1)
Vin
Cin
Vout
Cout
(VDC)
(μF)
(VDC)
(μF)
5
4.7
5
10
12
2.2
9
4.7
15
1
12
2.2
24
0.47
15
1
It's not recommend to connect any external capacitor in
the application field with less than 0.5 watt output.
RECOMMENDED FOOTPRINT
Overload Protection
Top view,grid:2.54mm(0.1inch)
Under normal operating conditions, the output circuit
of these products has no protection against over-current
and short-circuits.The simplest method is to connect a
self-recovery fuse in series at the input end or add a
circuit breaker to the circuit.
diameter:1.00mm(0.039inch)
FOOTPRINT DETAILS
Pin
1
7
9
11
14
FOOTPRINT DETAILS
Note:
Unit:mm(inch)
Pin section:0.50*0.3mm(0.020*0.012inch)
Pin section tolerances: ±0.10mm(±0.004inch)
Pin
1
2
4
6
General tolerances: ±0.25mm(±0.010inch)
SIP
VIN
GND
0V
+V0
SIP
GND
NC
+V0
0V
VIN
When the environment temperature is higher than
71
71℃,, the product output power should be less then
60% of the rated power.
NC:No Connection
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise
specified.Another 24V products, please inquire Our technical department!
Requirement on output load
To ensure this module can operate efficiently and reliably, During operation, the minimum output load is
not less than 10% of the full load, and that this product should never be operated under no load! If the
actual output power is very small, please connect a resistor with proper resistance at the output end in
parallel to increase the load.or use our company's products with a lower rated output power .
No parallel connection or plug and play.
Use dual output simultaneously, forbid opening output
pin(0V)to use as single output.
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646
E-mail:[email protected]
Website:http://www.microdc.cn
REACH COMPLIANT INFORMATION
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2